SDG 11 - Sustainable cities and communities

Make cities and human settlements inclusive, safe, resilient and sustainable

Sustainable urbanization

Safe food, clean water, sufficient energy, overall economic, social and environmental sustainability, as well as safety and security: these are the kinds of promises cities must fulfil to provide a decent quality of life to their citizens.

IEC work in standardization and conformity assessment underpins the large majority of the electrical and electronic infrastructure in cities and communities. This includes all forms of transportation, water and sanitation, electricity generation, healthcare, financial and administrative services, security and alarm systems, access control, CCTV, lighting, and more.

IEC International Standards, together with testing and certification also make infrastructure more resilient, helping to mitigate disaster risks and accelerating disaster recovery.

92 IEC TC/SCs and nearly 2 000 IEC Standards, 4 IEC SyCs and all 4 IEC CA Systems contribute to SDG 11.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

IEC work addresses topics related to sustainable cities and communities

Power generation

Power generation

Lighting

Lighting

Administration and financial services

Administration and financial services

Obsolescence management

Obsolescence management

Safety

Safety

Electricity access

Electricity access

Water and sanitation

Water and sanitation

Information technology

Information technology

Waste management

Waste management

Water

Water

Energy efficiency

Energy efficiency

Transportation

Transportation

Manufacturing

Manufacturing

Risk management

Risk management

Healthcare

Healthcare

Food production and distribution

Food production and distribution

Environmental protection

Environmental protection

Resilience

Resilience

IEC work directly impacts the following SDG targets

11.2 Safe, affordable, sustainable transport systems

IEC work provides international standards for trains, subway systems, sky trains, trolleybuses, pods, EVs, electric ferries and boats, the aviation industry, fuel cell driven vehicles, etc. It also supports the whole monitoring, control, service and safety infrastructure in train and metro stations, airports, bus stops, garages and at street level. IECEx provides important services that among other things ensure safety during fuelling at airports or sewage repair work.

  • IEC TC 9: Electrical equipment and systems for railways;
  • IEC TC 20: Electric cables;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
  • IEC TC 31 and 3 SCs: Equipment for explosive atmospheres;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 97: Electrical installations for lighting and beaconing of aerodromes;
  • IEC TC 100 and 12 TAs: Audio, video and multimedia systems and equipment;
  • IEC TC 110: Electronic displays;
  • IEC TC 120: Electrical energy storage (EES) systems;
  • IEC TC 121 and 2 SCs: Switchgear and controlgear and their assemblies for low voltage;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • ISO/IEC JTC 1 and 22 SCs: Information technology, in particular, ISO/IEC JTC 1/WG 11: Smart cities;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components.

11.3 and 11.6 Sustainable urbanization

Nearly 2 000 IEC International Standards from more than 100 IEC TCs directly impact safer, more sustainable urbanization: energy generation, intelligent mobility, healthcare, financial and administrative services, security and alarm systems, access control, smart buildings, aviation, transportation, more efficient farming and irrigation, etc.

  • IEC TC 20: Electric cables;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
  • IEC TC 29: Electroacoustics;
  • IEC TC 31 and 3 SCs: Equipment for explosive atmospheres;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC SC 45A: Instrumentation, control and electrical power systems of nuclear facilities;
  • IEC TC 46 and 3 SCs: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 56: Dependability, and IEC TC 57: Power systems management and associated information exchange, help improve the dependability and resilience of infrastructure;
  • IEC TC 57: Power systems management and associated information exchange;
  • IEC TC 59 and 7 SCs: Performance of household and similar electrical appliances;
  • IEC TC 61 and 5 SCs: Safety of household and similar electrical appliances, in particular, IEC SC 61J: Electrical motor-operated cleaning appliances for commercial use;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial-process measurement, control and automation, publishes IEC 61508 series of standards on functional safety. They ensure that electronic commands are executed if and when required. For example, triggering an alarm system and safety functions when a certain pressure or liquid level has been reached;
  • IEC TC 82: Solar photovoltaic energy systems;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 97: Electrical installations for lighting and beaconing of aerodromes;
  • IEC TC 100 and 12 TAs: Audio, video and multimedia systems and equipment;
  • IEC TC 110: Electronic displays;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 120: Electrical energy storage (EES) systems;
  • IEC TC 121 and 2 SCs: Switchgear and controlgear and their assemblies for low voltage;
  • IEC SyC AAL: Active assisted living;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • IEC SyC SM: Smart manufacturing;
  • ISO/IEC JTC 1 and 22 SCs: Information technology, in particular, ISO/IEC JTC 1/WG 11: Smart cities;
  • ISO/IEC JTC 1/SC 39: Sustainability for and by information technology;
  • ISO/IEC JTC 1/SC 41: Internet of things and related technologies;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.

11.5 and 11.B Increased disaster resilience

IEC International Standards together with testing and certification help ensure that infrastructure is more resilient in the face of disasters. The use of standards also facilitates disaster recovery, repairs and reconstruction.

  • IEC TC 20: Electric cables;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC TC 31 and 3 SCs: Equipment for explosive atmospheres;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC SC 45A: Instrumentation, control and electrical power systems of nuclear facilities;
  • IEC TC 56: Dependability, and IEC TC 57: Power systems management and associated information exchange, help improve the dependability and resilience of infrastructure;
  • IEC TC 57: Power systems management and associated information exchange;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial-process measurement, control and automation, publishes IEC 61508 series of standards on functional safety. They ensure that electronic commands are executed if and when required. For example, triggering an alarm system and safety functions when a certain pressure or liquid level has been reached;
  • IEC TC 78: Live working (disaster recovery), ensures the safety of workers during repair operations, for example, live working on downed power lines or the installation of electricity generators;
  • IEC TC 104: Environmental conditions, with its IEC 60721 series on classification and environmental tests helps improve the resilience of equipment in the face of disasters;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 120: Electrical energy storage (EES) systems;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

CISPR 12:2007+AMD1:2009 CSV
Edition 6.1 (2009-03-10)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR

CISPR/CIS/D

CISPR 12:2007
Edition 6.0 (2007-05-23)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR, ES

CISPR/CIS/D

CISPR 12:2007/AMD1:2009
Edition 6.0 (2009-01-12)
Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR, ES

CISPR/CIS/D

CISPR 14-1:2020
Edition 7.0 (2020-09-07)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

EN-FR, EN

CISPR/CIS/F

CISPR 14-2:2020
Edition 3.0 (2020-08-31)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

EN-FR, EN

CISPR/CIS/F

CISPR 15:2018
Edition 9.0 (2018-05-15)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN-FR, ES

CISPR/CIS/F

CISPR 15:2018/ISH1:2019
Edition 9.0 (2019-11-14)
Interpretation Sheet 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN

CISPR/CIS/F

CISPR 16-1-1:2019
Edition 5.0 (2019-05-22)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

EN-FR

CISPR/CIS/A

CISPR 16-1-2:2014
Edition 2.0 (2014-03-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-2:2014/AMD1:2017
Edition 2.0 (2017-11-07)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-3:2004
Edition 2.0 (2004-06-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, EN, FR, ES

CISPR/CIS/A

CISPR 16-1-3:2004/COR1:2006
Edition 2.0 (2006-02-09)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR

CISPR/CIS/A

CISPR 16-1-3:2004/AMD1:2016
Edition 2.0 (2016-03-31)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-3:2004/AMD2:2020
Edition 2.0 (2020-01-28)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-4:2019
Edition 4.0 (2019-01-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-4:2019/AMD1:2020
Edition 4.0 (2020-06-15)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014
Edition 2.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014/COR1:2020
Edition 2.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014/AMD1:2016
Edition 2.0 (2016-12-16)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-6:2014
Edition 1.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

EN-FR

CISPR/CIS/A

CISPR 16-1-6:2014/AMD1:2017
Edition 1.0 (2017-01-13)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

EN-FR

CISPR/CIS/A

CISPR 16-2-1:2014
Edition 3.0 (2014-02-26)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-1:2014/COR1:2020
Edition 3.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-2-1:2014/AMD1:2017
Edition 3.0 (2017-06-30)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-2:2010
Edition 2.0 (2010-07-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-3:2016
Edition 4.0 (2016-09-15)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-3:2016/AMD1:2019
Edition 4.0 (2019-06-25)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-2-4:2003
Edition 1.0 (2003-11-20)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

EN-FR, ES

CISPR/CIS/A

CISPR TR 16-2-5:2008
Edition 1.0 (2008-07-09)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment

EN

CISPR/CIS/H

CISPR TR 16-3:2020
Edition 4.0 (2020-10-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports

EN

CISPR/CIS/A

CISPR TR 16-4-1:2009
Edition 2.0 (2009-02-23)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

EN

CISPR/CIS/A

CISPR 16-4-2:2011
Edition 2.0 (2011-06-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/COR1:2013
Edition 2.0 (2013-04-11)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrument uncertainty

EN-FR

CISPR/CIS/A

CISPR 16-4-2:2011/AMD1:2014
Edition 2.0 (2014-02-14)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/AMD2:2018
Edition 2.0 (2018-08-15)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/AMD2:2018/COR1:2019
Edition 2.0 (2019-01-16)
Corrigendum 1 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR

CISPR/CIS/A

CISPR TR 16-4-3:2004+AMD1:2006 CSV
Edition 2.1 (2007-01-18)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-3:2004
Edition 2.0 (2004-05-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-3:2004/AMD1:2006
Edition 2.0 (2006-10-17)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-4:2007
Edition 2.0 (2007-07-16)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-4:2007/AMD1:2017
Edition 2.0 (2017-06-29)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-4:2007/AMD2:2020
Edition 2.0 (2020-04-23)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-5:2006
Edition 1.0 (2006-10-25)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR TR 16-4-5:2006/AMD1:2014
Edition 1.0 (2014-07-21)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR TR 16-4-5:2006/AMD2:2021
Edition 1.0 (2021-10-29)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR 17:2011
Edition 2.0 (2011-06-10)
Methods of measurement of the suppression characteristics of passive EMC filtering devices

EN-FR, ES

CISPR/CIS/A

CISPR TR 30-1:2012
Edition 1.0 (2012-08-24)
Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps

EN

CISPR/CIS/F

CISPR TR 30-2:2012
Edition 1.0 (2012-08-24)
Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps

EN

CISPR/CIS/F

CISPR TR 31:2012
Edition 2.0 (2012-09-18)
Database on the characteristics of radio services

EN-FR

CISPR/CIS/H

CISPR 36:2020
Edition 1.0 (2020-07-22)
Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

EN-FR

CISPR/CIS/D

IEC 60034-1:2017
Edition 13.0 (2017-05-09)
Rotating electrical machines - Part 1: Rating and performance

EN-FR

TC 2

IEC 60034-2-1:2014
Edition 2.0 (2014-06-27)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

EN-FR

TC 2

IEC 60034-2-2:2010
Edition 1.0 (2010-03-16)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

EN-FR

TC 2

IEC 60034-2-3:2020
Edition 1.0 (2020-03-19)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

EN-FR

TC 2

IEC 60034-3:2020
Edition 7.0 (2020-05-26)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

EN-FR

TC 2

IEC 60034-4-1:2018
Edition 1.0 (2018-04-27)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests

EN-FR

TC 2

IEC 60034-5:2020
Edition 5.0 (2020-04-29)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN-FR, EN

TC 2

IEC 60034-6:1991
Edition 2.0 (1991-10-01)
Rotating electrical machines - Part 6: Methods of cooling (IC Code)

EN-FR, ES

TC 2

IEC 60034-8:2007
Edition 3.0 (2007-06-22)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-8:2007/AMD1:2014
Edition 3.0 (2014-03-20)
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-12:2016
Edition 3.0 (2016-11-23)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

EN-FR

TC 2

IEC 60034-14:2018
Edition 4.0 (2018-08-17)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

EN-FR

TC 2

IEC 60034-15:2009
Edition 3.0 (2009-03-17)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

EN-FR, ES

TC 2

IEC 60034-16-1:2011
Edition 2.0 (2011-05-25)
Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

EN-FR, ES

TC 2

IEC TR 60034-16-2:1991
Edition 1.0 (1991-02-15)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

EN-FR, ES

TC 2

IEC TS 60034-16-3:1996
Edition 1.0 (1996-02-14)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

EN-FR

TC 2

IEC 60034-18-1:2010
Edition 2.0 (2010-03-10)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

EN-FR

TC 2

IEC 60034-18-21:2012
Edition 2.0 (2012-09-19)
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

EN-FR

TC 2

IEC 60034-18-31:2012
Edition 2.0 (2012-06-25)
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

EN-FR, ES

TC 2

IEC TS 60034-18-33:2010
Edition 2.0 (2010-07-22)
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

EN

TC 2

IEC 60034-18-34:2012
Edition 1.0 (2012-06-14)
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

EN-FR, ES

TC 2

IEC 60034-18-41:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019
Edition 1.0 (2019-06-25)
Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019/COR1:2020
Edition 1.0 (2020-12-11)
Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-42:2017
Edition 1.0 (2017-02-07)
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-18-42:2017/AMD1:2020
Edition 1.0 (2020-08-18)
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-19:2014
Edition 2.0 (2014-09-25)
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

EN-FR, ES

TC 2

IEC TS 60034-20-1:2002
Edition 1.0 (2002-01-18)
Rotating electrical machines - Part 20-1: Control motors - Stepping motors

EN-FR

TC 2

IEC 60034-22:2009
Edition 2.0 (2009-10-28)
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

EN-FR, ES

TC 2

IEC 60034-23:2019
Edition 1.0 (2019-01-24)
Rotating electrical machines - Part 23: Repair, overhaul and reclamation

EN-FR

TC 2

IEC TS 60034-24:2009
Edition 1.0 (2009-09-16)
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

EN-FR

TC 2

IEC TS 60034-25:2014
Edition 3.0 (2014-10-08)
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide

EN-FR

TC 2

IEC 60034-26:2006
Edition 1.0 (2006-07-24)
Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR, ES

TC 2

IEC 60034-26:2006/COR1:2014
Edition 1.0 (2014-09-03)
Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR

TC 2

IEC 60034-27-1:2017
Edition 1.0 (2017-12-13)
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

EN-FR

TC 2

IEC TS 60034-27-2:2012
Edition 1.0 (2012-03-22)
Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

EN

TC 2

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

EN-FR, ES

TC 2

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

EN-FR, ES

TC 2

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

EN-FR

TC 2

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

EN

TC 2

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

EN

TC 2

IEC 60061-1:2005 CSV
Edition 3.4 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD21:1998
Edition 3.0 (1998-03-16)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD22:1999
Edition 3.0 (1999-02-23)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD23:1999
Edition 3.0 (1999-07-29)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD24:2000
Edition 3.0 (2000-05-18)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD26:2001
Edition 3.0 (2001-02-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD27:2001
Edition 3.0 (2001-10-26)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD28:2002
Edition 3.0 (2002-05-03)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD29:2002
Edition 3.0 (2002-05-13)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD30:2002
Edition 3.0 (2002-10-29)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD31:2003
Edition 3.0 (2003-05-15)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD32:2003
Edition 3.0 (2003-09-03)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD33:2003
Edition 3.0 (2003-10-30)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD34:2004
Edition 3.0 (2004-07-26)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD35:2004
Edition 3.0 (2004-11-25)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD36:2005
Edition 3.0 (2005-10-03)
Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD37:2006
Edition 3.0 (2006-05-30)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD38:2006
Edition 3.0 (2006-12-14)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD39:2007
Edition 3.0 (2007-04-30)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD40:2008
Edition 3.0 (2008-07-18)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD41:2009
Edition 3.0 (2009-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD42:2009
Edition 3.0 (2009-07-24)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD43:2010
Edition 3.0 (2010-02-22)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD44:2010
Edition 3.0 (2010-04-29)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD45:2011
Edition 3.0 (2011-06-30)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD46:2011
Edition 3.0 (2011-06-30)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD47:2011
Edition 3.0 (2011-11-28)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD48:2012
Edition 3.0 (2012-09-27)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD49:2013
Edition 3.0 (2013-02-26)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD50:2014
Edition 3.0 (2014-02-19)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD51:2014
Edition 3.0 (2014-12-11)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD52:2015
Edition 3.0 (2015-07-24)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD53:2015
Edition 3.0 (2015-08-21)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD54:2016
Edition 3.0 (2016-05-30)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD55:2016
Edition 3.0 (2016-12-16)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017
Edition 3.0 (2017-05-16)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017/COR1:2017
Edition 3.0 (2017-11-14)
Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD57:2017
Edition 3.0 (2017-12-15)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018
Edition 3.0 (2018-08-23)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018/COR1:2019
Edition 3.0 (2019-03-12)
Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD59:2019
Edition 3.0 (2019-07-08)
Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD60:2020
Edition 3.0 (2020-03-31)
Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD61:2020
Edition 3.0 (2020-11-27)
Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2:1969/AMD18:1998
Edition 3.0 (1998-03-16)
Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD19:1999
Edition 3.0 (1999-02-23)
Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD20:1999
Edition 3.0 (1999-07-29)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD21:2000
Edition 3.0 (2000-05-26)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD22:2001
Edition 3.0 (2001-02-13)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD23:2001
Edition 3.0 (2001-02-13)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD24:2001
Edition 3.0 (2001-10-26)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD25:2002
Edition 3.0 (2002-05-03)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD26:2002
Edition 3.0 (2002-05-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD27:2002
Edition 3.0 (2002-10-29)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD28:2003
Edition 3.0 (2003-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD29:2003
Edition 3.0 (2003-09-03)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD30:2003
Edition 3.0 (2003-10-30)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD31:2004
Edition 3.0 (2004-07-26)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD32:2004
Edition 3.0 (2004-11-25)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD33:2005
Edition 3.0 (2005-10-03)
Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD34:2006
Edition 3.0 (2006-05-30)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD35:2006
Edition 3.0 (2006-12-14)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD36:2007
Edition 3.0 (2007-04-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD37:2008
Edition 3.0 (2008-07-18)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD38:2009
Edition 3.0 (2009-04-29)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD39:2009
Edition 3.0 (2009-07-24)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD40:2010
Edition 3.0 (2010-02-22)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD41:2010
Edition 3.0 (2010-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD42:2011
Edition 3.0 (2011-06-30)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD44:2011
Edition 3.0 (2011-11-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD45:2012
Edition 3.0 (2012-09-27)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD46:2013
Edition 3.0 (2013-02-26)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD47:2014
Edition 3.0 (2014-02-19)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD48:2014
Edition 3.0 (2014-12-11)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD49:2015
Edition 3.0 (2015-07-24)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD50:2015
Edition 3.0 (2015-08-21)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD51:2016
Edition 3.0 (2016-05-30)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD52:2017
Edition 3.0 (2017-05-16)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD53:2017
Edition 3.0 (2017-12-15)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD54:2018
Edition 3.0 (2018-08-23)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD55:2020
Edition 3.0 (2020-03-31)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD56:2020
Edition 3.0 (2020-05-13)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD57:2020
Edition 3.0 (2020-11-27)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR, RU

TC 34/SC 34B

IEC 60061-3:1969/AMD20:1998
Edition 3.0 (1998-03-16)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD21:1999
Edition 3.0 (1999-02-23)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD22:1999
Edition 3.0 (1999-07-29)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD23:2000
Edition 3.0 (2000-05-18)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD24:2001
Edition 3.0 (2001-02-13)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD26:2001
Edition 3.0 (2001-10-26)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD27:2002
Edition 3.0 (2002-05-03)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD28:2002
Edition 3.0 (2002-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD29:2002
Edition 3.0 (2002-10-31)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD30:2003
Edition 3.0 (2003-05-15)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD31:2003
Edition 3.0 (2003-09-03)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD32:2003
Edition 3.0 (2003-10-30)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD33:2004
Edition 3.0 (2004-07-26)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD34:2004
Edition 3.0 (2004-11-25)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD35:2005
Edition 3.0 (2005-10-03)
Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD36:2006
Edition 3.0 (2006-05-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD37:2006
Edition 3.0 (2006-12-14)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD38:2007
Edition 3.0 (2007-04-30)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD39:2009
Edition 3.0 (2009-04-29)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD40:2009
Edition 3.0 (2009-07-24)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD41:2010
Edition 3.0 (2010-02-22)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD42:2010
Edition 3.0 (2010-04-29)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD44:2011
Edition 3.0 (2011-07-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD45:2011
Edition 3.0 (2011-11-28)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD46:2012
Edition 3.0 (2012-09-27)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD47:2013
Edition 3.0 (2013-02-26)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD48:2014
Edition 3.0 (2014-02-19)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD49:2014
Edition 3.0 (2014-12-11)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD50:2015
Edition 3.0 (2015-07-24)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD51:2015
Edition 3.0 (2015-08-21)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD52:2016
Edition 3.0 (2016-05-30)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD53:2017
Edition 3.0 (2017-05-16)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD54:2017
Edition 3.0 (2017-12-15)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD55:2018
Edition 3.0 (2018-08-23)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD56:2019
Edition 3.0 (2019-07-08)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD57:2020
Edition 3.0 (2020-03-31)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD58:2020
Edition 3.0 (2020-05-13)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4:2005 CSV
Edition 1.9 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990
Edition 1.0 (1990-02-28)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD5:1998
Edition 1.0 (1998-03-16)
Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD6:2000
Edition 1.0 (2000-05-18)
Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD7:2001
Edition 1.0 (2001-10-26)
Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD8:2003
Edition 1.0 (2003-05-13)
Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD9:2004
Edition 1.0 (2004-11-25)
Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD10:2006
Edition 1.0 (2006-05-30)
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD11:2007
Edition 1.0 (2007-10-16)
Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD12:2009
Edition 1.0 (2009-07-24)
Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD13:2010
Edition 1.0 (2010-08-31)
Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD14:2011
Edition 1.0 (2011-08-26)
Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD15:2017
Edition 1.0 (2017-05-16)
Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD16:2018
Edition 1.0 (2018-03-22)
Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-1A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1D:1972
Edition 3.0 (1972-01-01)
supplement 4 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1E:1972
Edition 3.0 (1972-01-01)
Supplement 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1F:1975
Edition 3.0 (1975-01-01)
Supplement 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1H:1977
Edition 3.0 (1977-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1J:1980
Edition 3.0 (1980-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR, RU

TC 34/SC 34B

IEC 60061-1K:1983
Edition 3.0 (1983-01-01)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1L:1987
Edition 3.0 (1987-01-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1M:1989
Edition 3.0 (1989-01-01)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1N:1992
Edition 3.0 (1992-04-30)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1P:1994
Edition 3.0 (1994-03-01)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1Q:1994
Edition 3.0 (1994-11-23)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1R:1995
Edition 3.0 (1995-11-08)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1S:1996
Edition 3.0 (1996-02-01)
seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1T:1996
Edition 3.0 (1996-07-01)
eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1U:1996
Edition 3.0 (1996-10-01)
nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1V:1997
Edition 3.0 (1997-05-23)
Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2A:1970
Edition 3.0 (1970-01-01)
first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2B:1971
Edition 3.0 (1971-01-01)
second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2C:1972
Edition 3.0 (1972-01-01)
third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2D:1975
Edition 3.0 (1975-01-01)
fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2E:1977
Edition 3.0 (1977-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2F:1980
Edition 3.0 (1980-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2G:1983
Edition 3.0 (1983-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2H:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2J:1989
Edition 3.0 (1989-12-31)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2K:1992
Edition 3.0 (1992-04-15)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2L:1994
Edition 3.0 (1994-03-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2M:1994
Edition 3.0 (1994-11-23)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2N:1995
Edition 3.0 (1995-11-08)
Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2P:1996
Edition 3.0 (1996-02-01)
Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2Q:1996
Edition 3.0 (1996-07-01)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2R:1996
Edition 3.0 (1996-10-01)
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2S:1997
Edition 3.0 (1997-05-23)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3D:1972
Edition 3.0 (1972-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3E:1972
Edition 3.0 (1972-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3F:1975
Edition 3.0 (1975-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3H:1980
Edition 3.0 (1980-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3J:1983
Edition 3.0 (1983-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3K:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3L:1989
Edition 3.0 (1989-12-15)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3M:1992
Edition 3.0 (1992-04-30)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3N:1994
Edition 3.0 (1994-03-01)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3P:1994
Edition 3.0 (1994-11-23)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3Q:1995
Edition 3.0 (1995-11-08)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3R:1996
Edition 3.0 (1996-02-01)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3S:1996
Edition 3.0 (1996-07-01)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3T:1996
Edition 3.0 (1996-10-01)
Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3U:1997
Edition 3.0 (1997-05-23)
Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4A:1992
Edition 1.0 (1992-04-30)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4B:1994
Edition 1.0 (1994-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4C:1994
Edition 1.0 (1994-11-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4D:1995
Edition 1.0 (1995-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV
Edition 6.3 (2005-05-24)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, EN, FR

TC 34/SC 34A

IEC 60064:1993
Edition 6.0 (1993-12-17)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD1:2000
Edition 6.0 (2000-11-28)
Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD2:2002
Edition 6.0 (2002-11-29)
Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD3:2005
Edition 6.0 (2005-03-17)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD4:2007
Edition 6.0 (2007-02-16)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD5:2009
Edition 6.0 (2009-07-30)
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60068-2-42:2003
Edition 3.0 (2003-05-22)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-43:2003
Edition 2.0 (2003-05-23)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-46:1982
Edition 1.0 (1982-01-01)
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60068-2-49:1983
Edition 1.0 (1983-01-01)
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60072-1:1991
Edition 6.0 (1991-02-01)
Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

EN-FR

TC 2

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

EN-FR

TC 2

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

EN-FR

TC 2

IEC 60076-1:2011
Edition 3.0 (2011-04-20)
Power transformers - Part 1: General

EN-FR, ES

TC 14

IEC 60076-2:2011
Edition 3.0 (2011-02-23)
Power transformers - Part 2: Temperature rise for liquid-immersed transformers

EN-FR, ES

TC 14

IEC 60076-3:2013
Edition 3.0 (2013-07-31)
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

EN-FR, ES

TC 14

IEC 60076-3:2013/AMD1:2018
Edition 3.0 (2018-03-22)
Amendment 1 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

EN-FR, ES

TC 14

IEC 60076-4:2002
Edition 1.0 (2002-06-06)
Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

EN-FR, EN, FR, ES

TC 14

IEC 60076-5:2006
Edition 3.0 (2006-02-07)
Power transformers - Part 5: Ability to withstand short circuit

EN-FR, EN, FR, ES

TC 14

IEC 60076-6:2007
Edition 1.0 (2007-12-13)
Power transformers - Part 6: Reactors

EN-FR, ES

TC 14

IEC 60076-7:2018
Edition 2.0 (2018-01-12)
Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers

EN

TC 14

IEC 60076-8:1997
Edition 1.0 (1997-10-01)
Power transformers - Part 8: Application guide

EN-FR, EN, FR, ES

TC 14

IEC 60076-10:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10: Determination of sound levels

EN-FR, ES

TC 14

IEC 60076-10-1:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10-1: Determination of sound levels - Application guide

EN-FR

TC 14

IEC 60076-10-1:2016/AMD1:2020
Edition 2.0 (2020-11-02)
Amendment 1 - Power transformers - Part 10-1: Determination of sound levels - Application guide

EN

TC 14

IEC 60076-11:2018
Edition 2.0 (2018-08-15)
Power transformers - Part 11: Dry-type transformers

EN-FR, ES

TC 14

IEC 60076-11:2018/ISH1:2020
Edition 2.0 (2020-07-10)
Interpretation sheet 1 - Power transformers - Part 11: Dry-type transformers

EN

TC 14

IEC 60076-11:2018/COR1:2019
Edition 2.0 (2019-03-28)
Corrigendum 1 - Power transformers - Part 11: Dry-type transformers

EN-FR

TC 14

IEC 60076-12:2008
Edition 1.0 (2008-11-05)
Power transformers - Part 12: Loading guide for dry-type power transformers

EN-FR, ES

TC 14

IEC 60076-13:2006
Edition 1.0 (2006-05-24)
Power transformers - Part 13: Self-protected liquid-filled transformers

EN-FR, ES

TC 14

IEC 60076-14:2013
Edition 1.0 (2013-09-16)
Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials

EN-FR, ES

TC 14

IEC 60076-15:2015
Edition 2.0 (2015-04-22)
Power transformers - Part 15: Gas-filled power transformers

EN-FR

TC 14

IEC 60076-18:2012
Edition 1.0 (2012-07-09)
Power transformers - Part 18: Measurement of frequency response

EN-FR, ES

TC 14

IEC TS 60076-20:2017
Edition 1.0 (2017-01-30)
Power transformers - Part 20: Energy efficiency

EN

TC 14

IEC TS 60076-20:2017/COR1:2018
Edition 1.0 (2018-01-12)
Corrigendum 1 - Power transformers - Part 20: Energy efficiency

EN

TC 14

IEC 60076-21:2018
Edition 2.0 (2018-12-07)
Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators

EN

TC 14

IEC 60076-22-1:2019
Edition 1.0 (2019-01-29)
Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices

EN-FR, ES

TC 14

IEC 60076-22-2:2019
Edition 1.0 (2019-01-16)
Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators

EN-FR, ES

TC 14

IEC 60076-22-3:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers

EN-FR, ES

TC 14

IEC 60076-22-4:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers

EN-FR, ES

TC 14

IEC 60076-22-7:2020
Edition 1.0 (2020-05-07)
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

EN-FR, ES

TC 14

IEC TS 60076-23:2018
Edition 1.0 (2018-01-09)
Power transformers - Part 23: DC magnetic bias suppression devices

EN

TC 14

IEC 60076-24:2020
Edition 1.0 (2020-07-09)
Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)

EN-FR

TC 14

IEC TR 60076-26:2020
Edition 1.0 (2020-03-26)
Power transformers - Part 26: Functional requirements of insulating liquids for use in power transformers

EN

TC 14

IEC/IEEE 60076-57-1202:2017
Edition 1.0 (2017-05-23)
Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers

EN-FR

TC 14

IEC/IEEE 60076-57-129:2017
Edition 1.0 (2017-11-09)
Power transformers - Part 57-129: Transformers for HVDC applications

EN

TC 14

IEC 60079-0:2017
Edition 7.0 (2017-12-13)
Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR, ES

TC 31

IEC 60079-0:2017/ISH1:2019
Edition 7.0 (2019-04-23)
Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/ISH2:2019
Edition 7.0 (2019-06-27)
Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/COR1:2020
Edition 7.0 (2020-01-20)
Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-1:2014
Edition 7.0 (2014-06-27)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR, ES

TC 31

IEC 60079-1:2014/ISH1:2020
Edition 7.0 (2020-05-28)
Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN

TC 31

IEC 60079-1:2014/COR1:2018
Edition 7.0 (2018-06-26)
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR

TC 31

IEC 60079-2:2014
Edition 6.0 (2014-07-21)
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR, ES

TC 31

IEC 60079-2:2014/COR1:2015
Edition 6.0 (2015-07-07)
Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR

TC 31

IEC 60079-5:2015
Edition 4.0 (2015-02-17)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

EN-FR, ES

TC 31

IEC 60079-6:2015
Edition 4.0 (2015-02-20)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR, ES

TC 31

IEC 60079-6:2015/AMD1:2020
Edition 4.0 (2020-02-24)
Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR

TC 31

IEC 60079-7:2015
Edition 5.0 (2015-06-26)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, EN, ES

TC 31

IEC 60079-7:2015/ISH1:2016
Edition 5.0 (2016-09-15)
Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR

TC 31

IEC 60079-7:2015/AMD1:2017
Edition 5.0 (2017-08-04)
Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, ES

TC 31

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

EN-FR

TC 31/SC 31J

IEC 60079-10-2:2015
Edition 2.0 (2015-01-16)
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-11:2011
Edition 6.0 (2011-06-30)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR, ES

TC 31/SC 31G

IEC 60079-11:2011/ISH1:2014
Edition 6.0 (2014-10-08)
Interpretation sheet 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH2:2016
Edition 6.0 (2016-07-21)
Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH3:2016
Edition 6.0 (2016-07-21)
Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH4:2019
Edition 6.0 (2019-04-16)
Interpretation Sheet 4 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH5:2019
Edition 6.0 (2019-08-29)
Interpretation Sheet 5 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN

TC 31/SC 31G

IEC 60079-11:2011/ISH6:2019
Edition 6.0 (2019-12-13)
Interpretation sheet 6 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/COR1:2012
Edition 6.0 (2012-01-27)
Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-13:2017
Edition 2.0 (2017-05-22)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

EN-FR, EN, ES

TC 31

IEC 60079-15:2017
Edition 5.0 (2017-12-08)
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

EN-FR, ES

TC 31

IEC TR 60079-16:1990
Edition 1.0 (1990-05-15)
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses

EN-FR, ES

TC 31

IEC 60079-18:2014
Edition 4.0 (2014-12-12)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-18:2014/COR1:2018
Edition 4.0 (2018-07-25)
Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR

TC 31

IEC 60079-18:2014/AMD1:2017
Edition 4.0 (2017-08-24)
Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

EN-FR, ES

TC 31/SC 31J

IEC 60079-25:2020
Edition 3.0 (2020-06-26)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-25:2020/COR1:2020
Edition 3.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-28:2015
Edition 2.0 (2015-05-27)
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR, ES

TC 31

IEC 60079-28:2015/ISH1:2019
Edition 2.0 (2019-11-14)
Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR

TC 31

IEC 60079-29-1:2016
Edition 2.0 (2016-07-21)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR, EN, ES

TC 31

IEC 60079-29-1:2016/ISH1:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/ISH2:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/AMD1:2020
Edition 2.0 (2020-03-24)
Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR

TC 31

IEC 60079-29-2:2015
Edition 2.0 (2015-03-16)
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

EN-FR, EN, ES

TC 31

IEC 60079-29-3:2014
Edition 1.0 (2014-03-27)
Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

EN-FR, ES

TC 31

IEC 60079-29-4:2009
Edition 1.0 (2009-11-10)
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR, ES

TC 31

IEC 60079-29-4:2009/COR1:2010
Edition 1.0 (2010-08-10)
Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR

TC 31

IEC/IEEE 60079-30-1:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

EN-FR, EN, ES

TC 31

IEC/IEEE 60079-30-2:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

EN-FR, EN, ES

TC 31

IEC TS 60079-32-1:2013
Edition 1.0 (2013-08-20)
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN, RU

TC 31

IEC TS 60079-32-1:2013/AMD1:2017
Edition 1.0 (2017-03-16)
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN

TC 31

IEC 60079-32-2:2015
Edition 1.0 (2015-02-25)
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

EN-FR, ES, RU

TC 31

IEC 60079-33:2012
Edition 1.0 (2012-09-27)
Explosive atmospheres - Part 33: Equipment protection by special protection 's'

EN-FR

TC 31

IEC 60079-35-1:2011
Edition 1.0 (2011-05-26)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

EN-FR, ES

TC 31

IEC 60079-35-2:2011
Edition 1.0 (2011-12-07)
Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

EN-FR, ES

TC 31

IEC TS 60079-39:2015
Edition 1.0 (2015-06-11)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-39:2015/COR1:2020
Edition 1.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-40:2015
Edition 1.0 (2015-02-05)
Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

EN

TC 31

IEC TS 60079-42:2019
Edition 1.0 (2019-04-17)
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

EN-FR

TC 31

IEC TS 60079-43:2017
Edition 1.0 (2017-11-13)
Explosive atmospheres - Part 43: Equipment in adverse service conditions

EN

TC 31

IEC TS 60079-46:2017
Edition 1.0 (2017-08-31)
Explosive atmospheres - Part 46: Equipment assemblies

EN-FR, EN

TC 31

IEC 60081:1997+AMD1:2000 CSV
Edition 5.1 (2002-05-29)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997
Edition 5.0 (1997-12-15)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD1:2000
Edition 5.0 (2000-01-27)
Amendment 1 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD2:2003
Edition 5.0 (2003-03-04)
Amendment 2 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD3:2005
Edition 5.0 (2005-09-27)
Amendment 3 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD4:2010
Edition 5.0 (2010-02-18)
Amendment 4 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD5:2013
Edition 5.0 (2013-07-19)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD6:2017
Edition 5.0 (2017-08-25)
Amendment 6 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60086-1:2021
Edition 13.0 (2021-04-27)
Primary batteries - Part 1: General

EN-FR

TC 35

IEC 60096-0-1:2012
Edition 3.0 (2012-10-30)
Radio frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables

EN-FR

TC 46/SC 46A

IEC 60096-0-1:2012/AMD1:2017
Edition 3.0 (2017-01-25)
Amendment 1 - Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables

EN-FR

TC 46/SC 46A

IEC 60099-4:2014
Edition 3.0 (2014-06-30)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

EN-FR, ES

TC 37

IEC 60099-5:2018
Edition 3.0 (2018-01-19)
Surge arresters - Part 5: Selection and application recommendations

EN-FR, EN

TC 37

IEC 60099-6:2019
Edition 2.0 (2019-05-22)
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less

EN-FR

TC 37

IEC 60099-8:2017
Edition 2.0 (2017-11-14)
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

EN-FR, EN

TC 37

IEC 60099-9:2014
Edition 1.0 (2014-06-26)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations

EN-FR

TC 37

IEC 60122-1:2002
Edition 3.0 (2002-08-09)
Quartz crystal units of assessed quality - Part 1: Generic specification

EN-FR

TC 49

IEC 60122-1:2002/AMD1:2017
Edition 3.0 (2017-12-08)
Amendment 1 - Quartz crystal units of assessed quality - Part 1: Generic specification

EN-FR, EN

TC 49

IEC 60122-2:1983
Edition 2.0 (1983-01-01)
Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection

EN-FR, RU

TC 49

IEC 60122-2-1:1991
Edition 1.0 (1991-07-22)
Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply

EN-FR

TC 49

IEC 60122-2-1:1991/AMD1:1993
Edition 1.0 (1993-09-06)
Amendment 1 - Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply

EN-FR

TC 49

IEC 60122-4:2019
Edition 1.0 (2019-01-24)
Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors

EN-FR

TC 49

IEC 60130-1:1988
Edition 2.0 (1988-11-10)
Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

EN-FR, RU

TC 48/SC 48B

IEC 60130-5:1966
Edition 1.0 (1966-01-01)
Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

EN-FR, RU

TC 48/SC 48B

IEC 60130-9:2011
Edition 4.0 (2011-02-23)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

EN-FR

TC 48/SC 48B

IEC 60130-10:1971
Edition 1.0 (1971-01-01)
Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

EN-FR, RU

TC 48/SC 48B

IEC 60130-12:1976
Edition 2.0 (1976-01-01)
Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

EN-FR, RU

TC 48/SC 48B

IEC 60130-17:1998
Edition 1.0 (1998-02-12)
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

EN-FR

TC 48/SC 48B

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60137:2017
Edition 7.0 (2017-06-22)
Insulated bushings for alternating voltages above 1000 V

EN-FR, ES

TC 36/SC 36A

IEC 60137:2017/COR1:2018
Edition 7.0 (2018-05-07)
Corrigendum 1 - Insulated bushings for alternating voltages above 1 000 V

EN-FR

TC 36/SC 36A

IEC 60146-1-1:2009
Edition 4.0 (2009-06-29)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

EN-FR

TC 22

IEC TR 60146-1-2:2019
Edition 5.0 (2019-10-22)
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines

EN

TC 22

IEC 60146-2:1999
Edition 2.0 (1999-11-18)
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

EN-FR

TC 22

IEC 60155:1993
Edition 4.0 (1993-11-30)
Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD1:1995
Edition 4.0 (1995-10-17)
Amendment 1 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD2:2006
Edition 4.0 (2006-11-27)
Amendment 2 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60168:1994+AMD1:1997+AMD2:2000 CSV
Edition 4.2 (2001-04-19)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR

TC 36

IEC 60168:1994
Edition 4.0 (1994-11-16)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD1:1997
Edition 4.0 (1997-06-24)
Amendment 1 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD2:2000
Edition 4.0 (2000-10-18)
Amendment 2 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60188:2001
Edition 3.0 (2001-05-30)
High-pressure mercury vapour lamps - Performance specifications

EN-FR, ES

TC 34/SC 34A

IEC 60189-1:2018
Edition 4.0 (2018-06-22)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

EN

TC 46/SC 46C

IEC 60189-2:2007
Edition 4.0 (2007-05-23)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations

EN, ES

TC 46/SC 46C

IEC 60189-3:2007
Edition 4.0 (2007-05-23)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

EN

TC 46/SC 46C

IEC 60192:2001
Edition 3.0 (2001-05-22)
Low-pressure sodium vapour lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60197:1965
Edition 1.0 (1965-01-01)
High-voltage connecting wire with flame retarding insulation for use in television receivers

EN-FR

TC 46

IEC 60214-1:2014
Edition 2.0 (2014-05-22)
Tap-changers - Part 1: Performance requirements and test methods

EN-FR, EN, ES

TC 14

IEC/IEEE 60214-2:2019
Edition 2.0 (2019-06-14)
Tap-changers - Part 2: Application guidelines

EN

TC 14

IEC 60238:2016
Edition 9.0 (2016-07-14)
Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017
Edition 9.0 (2017-01-30)
Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017/COR1:2018
Edition 9.0 (2018-01-30)
Corrigendum 1 - Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD2:2020
Edition 9.0 (2020-01-20)
Amendment 2 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60240-1:1992
Edition 2.0 (1992-07-31)
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

EN-FR

TC 34/SC 34A

IEC 60246:1967
Edition 1.0 (1967-01-01)
Connecting wires having a rated voltage of 20 kV and 25 kV d.c. anda maximum working temperature of 105 °C for use in televisionreceivers

EN-FR

TC 46

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

EN-FR

TC 2

IEC 60299:2014
Edition 3.0 (2014-07-10)
Household electric blankets - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60304:1982
Edition 3.0 (1982-01-01)
Standard colours for insulation for low-frequency cables and wires

EN-FR, EN, FR

TC 46/SC 46C

IEC 60310:2016
Edition 4.0 (2016-01-27)
Railway applications - Traction transformers and inductors on board rolling stock

EN-FR, ES

TC 9

IEC 60310:2016/COR1:2018
Edition 4.0 (2018-02-14)
Corrigendum 1 - Railway applications - Traction transformers and inductors on board rolling stock

EN-FR

TC 9

IEC 60311:2016
Edition 5.0 (2016-12-16)
Electric irons for household or similar use - Methods for measuring performance

EN-FR, ES

TC 59/SC 59L

IEC 60331-1:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

EN-FR, EN, ES

TC 20

IEC 60331-2:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

EN-FR, EN

TC 20

IEC 60331-3:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

EN-FR, EN

TC 20

IEC 60331-11:1999+AMD1:2009 CSV
Edition 1.1 (2009-07-08)
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

EN-FR

TC 20

IEC 60331-11:1999
Edition 1.0 (1999-04-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

EN-FR, ES

TC 20

IEC 60331-11:1999/AMD1:2009
Edition 1.0 (2009-05-19)
Amendment 1 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

EN-FR

TC 20

IEC 60331-21:1999
Edition 1.0 (1999-04-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV

EN-FR, ES

TC 20

IEC 60331-23:1999
Edition 1.0 (1999-04-23)
Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables

EN-FR, ES

TC 20

IEC 60331-25:1999
Edition 1.0 (1999-04-23)
Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables

EN-FR, ES

TC 20

IEC 60332-1-1:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

EN-FR, ES

TC 20

IEC 60332-1-1:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

EN-FR, ES

TC 20

IEC 60332-1-2:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

EN-FR, ES

TC 20

IEC 60332-1-2:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

EN-FR, ES

TC 20

IEC 60332-1-3:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

EN-FR, ES

TC 20

IEC 60332-1-3:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

EN-FR, ES

TC 20

IEC 60332-2-1:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

EN-FR, ES

TC 20

IEC 60332-2-2:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

EN-FR, ES

TC 20

IEC 60332-3-10:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

EN-FR, ES

TC 20

IEC 60332-3-10:2018/COR1:2018
Edition 2.0 (2018-10-11)
Corrigendum 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

EN-FR

TC 20

IEC 60332-3-21:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R

EN-FR, ES

TC 20

IEC 60332-3-22:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A

EN-FR, ES

TC 20

IEC 60332-3-23:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B

EN-FR, ES

TC 20

IEC 60332-3-24:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

EN-FR, ES

TC 20

IEC 60332-3-24:2018/ISH1:2019
Edition 2.0 (2019-01-18)
Interpretation sheet 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

EN

TC 20

IEC 60332-3-25:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D

EN-FR, ES

TC 20

IEC 60335-2-40:2018
Edition 6.0 (2018-01-26)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

EN-FR, EN

TC 61/SC 61D

IEC 60335-2-72:2021
Edition 5.0 (2021-07-12)
Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

EN

TC 61/SC 61J

IEC 60335-2-88:2002
Edition 2.0 (2002-10-29)
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

EN, ES

TC 61/SC 61D

IEC 60335-2-104:2021
Edition 2.0 (2021-05-07)
Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

EN

TC 61/SC 61D

IEC TR 60344:2007
Edition 3.0 (2007-02-16)
Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

EN

TC 46/SC 46C

IEC TR 60344:2007/COR1:2012
Edition 3.0 (2012-02-24)
Corrigendum 1 - Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

EN

TC 46/SC 46C

IEC 60350-1:2016
Edition 2.0 (2016-04-29)
Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

EN-FR, ES

TC 59/SC 59K

IEC 60350-1:2016/ISH1:2021
Edition 2.0 (2021-03-12)
Interpretation sheet 1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

EN-FR

TC 59/SC 59K

IEC 60350-1:2016/AMD1:2021
Edition 2.0 (2021-05-17)
Amendment 1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

EN-FR

TC 59/SC 59K

IEC 60350-2:2017
Edition 2.0 (2017-08-30)
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

EN-FR, EN, ES

TC 59/SC 59K

IEC 60350-2:2017/AMD1:2021
Edition 2.0 (2021-05-18)
Amendment 1 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

EN-FR

TC 59/SC 59K

IEC 60352-1:1997
Edition 3.0 (1997-08-06)
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR, ES

TC 48/SC 48B

IEC 60352-1:1997/COR1:1998
Edition 3.0 (1998-10-07)
Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-2:2006
Edition 2.0 (2006-02-23)
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-2:2006/AMD1:2013
Edition 2.0 (2013-06-27)
Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-3:2020
Edition 2.0 (2020-04-09)
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-4:2020
Edition 2.0 (2020-06-11)
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-5:2020
Edition 5.0 (2020-07-22)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

EN-FR, EN

TC 48/SC 48B

IEC 60352-6:1997
Edition 1.0 (1997-08-26)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

EN-FR, ES

TC 48/SC 48B

IEC 60352-8:2011
Edition 1.0 (2011-02-10)
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60356:1971
Edition 1.0 (1971-01-01)
Dimensions for commutators and slip-rings

EN-FR

TC 2

IEC 60357:2002
Edition 3.0 (2002-11-15)
Tungsten halogen lamps (non vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD1:2006
Edition 3.0 (2006-04-11)
Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD2:2008
Edition 3.0 (2008-10-08)
Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD3:2011
Edition 3.0 (2011-01-27)
Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60360:1998
Edition 3.0 (1998-06-10)
Standard method of measurement of lamp cap temperature rise

EN-FR, ES

TC 34/SC 34A

IEC 60360:1998/COR1:1999
Edition 3.0 (1999-03-16)
Corrigendum 1 - Standard method of measurement of lamp cap temperature rise

EN-FR

TC 34/SC 34A

IEC 60364-1:2005
Edition 5.0 (2005-11-29)
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

EN-FR, EN, FR

TC 64

IEC 60364-1:2005/COR1:2009
Edition 5.0 (2009-08-28)
Corrigendum 1 - Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

EN-FR

TC 64

IEC 60364-4-41:2005
Edition 5.0 (2005-12-15)
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

EN-FR, EN, FR, ES

TC 64

IEC 60364-4-41:2005/AMD1:2017
Edition 5.0 (2017-03-17)
Amendment 1 - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

EN-FR, ES

TC 64

IEC 60364-4-42:2010
Edition 3.0 (2010-05-19)
Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects

EN-FR

TC 64

IEC 60364-4-42:2010/AMD1:2014
Edition 3.0 (2014-11-13)
Amendment 1 - Low-voltage electrical installation - Part 4-42: Protection for safety - Protection against thermal effects

EN-FR

TC 64

IEC 60364-4-43:2008
Edition 3.0 (2008-08-13)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

EN-FR

TC 64

IEC 60364-4-43:2008/COR1:2008
Edition 3.0 (2008-10-13)
Corrigendum 1 - Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

EN-FR

TC 64

IEC 60364-4-44:2007
Edition 2.0 (2007-08-14)
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-4-44:2007/COR1:2010
Edition 2.0 (2010-05-26)
Corrigendum 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-4-44:2007/COR2:2011
Edition 2.0 (2011-10-13)
Corrigendum 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-4-44:2007/AMD1:2015
Edition 2.0 (2015-09-23)
Amendment 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-4-44:2007/AMD1:2015/COR1:2016
Edition 2.0 (2016-08-30)
Corrigendum 1 - Amendment 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-4-44:2007/AMD2:2018
Edition 2.0 (2018-01-16)
Amendment 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

EN-FR

TC 64

IEC 60364-5-51:2005
Edition 5.0 (2005-04-14)
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

EN-FR, EN, FR

TC 64

IEC 60364-5-52:2009
Edition 3.0 (2009-10-20)
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

EN-FR

TC 64

IEC 60364-5-52:2009/COR1:2011
Edition 3.0 (2011-02-10)
Corrigendum 1 - Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

EN-FR

TC 64

IEC 60364-5-53:2019
Edition 4.0 (2019-02-21)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring

EN-FR, EN

TC 64

IEC 60364-5-53:2019/AMD1:2020
Edition 4.0 (2020-12-10)
Amendment 1 - Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring

EN-FR

TC 64

IEC 60364-5-54:2011
Edition 3.0 (2011-03-23)
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

EN-FR, ES

TC 64

IEC 60364-5-54:2011/AMD1:2021
Edition 3.0 (2021-04-13)
Amendment 1 - Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

EN-FR

TC 64

IEC 60364-5-55:2011
Edition 2.0 (2011-12-14)
Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

EN-FR

TC 64

IEC 60364-5-55:2011/AMD1:2012
Edition 2.0 (2012-10-12)
Amendment 1 - Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

EN-FR

TC 64

IEC 60364-5-55:2011/AMD2:2016
Edition 2.0 (2016-07-28)
Amendment 2 - Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

EN-FR

TC 64

IEC 60364-5-56:2018
Edition 3.0 (2018-11-02)
Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

EN, ES

TC 64

IEC 60364-6:2016
Edition 2.0 (2016-04-27)
Low voltage electrical installations - Part 6: Verification

EN-FR, ES

TC 64

IEC 60364-6:2016/COR1:2017
Edition 2.0 (2017-09-20)
Corrigendum 1 - Low voltage electrical installations - Part 6: Verification

EN-FR

TC 64

IEC 60364-7-701:2019
Edition 3.0 (2019-10-14)
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

EN-FR

TC 64

IEC 60364-7-702:2010
Edition 3.0 (2010-05-12)
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

EN-FR

TC 64

IEC 60364-7-703:2004
Edition 2.0 (2004-10-26)
Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters

EN-FR, ES

TC 64

IEC 60364-7-704:2017
Edition 3.0 (2017-03-28)
Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

EN-FR, EN, ES

TC 64

IEC 60364-7-705:2006
Edition 2.0 (2006-07-10)
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

EN-FR, EN, FR

TC 64

IEC 60364-7-706:2005
Edition 2.0 (2005-10-19)
Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

EN-FR, ES

TC 64

IEC 60364-7-706:2005/AMD1:2019
Edition 2.0 (2019-09-26)
Amendment 1 - Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

EN-FR

TC 64

IEC 60364-7-709:2007+AMD1:2012 CSV
Edition 2.1 (2012-03-26)
Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations

EN-FR

TC 64

IEC 60364-7-709:2007
Edition 2.0 (2007-05-10)
Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations

EN-FR

TC 64

IEC 60364-7-709:2007/AMD1:2012
Edition 2.0 (2012-02-15)
Amendment 1 - Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations

EN-FR

TC 64

IEC 60364-7-710:2021
Edition 2.0 (2021-05-05)
Low-voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations

EN-FR

TC 64

IEC 60364-7-711:2018
Edition 2.0 (2018-03-08)
Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands

EN-FR, ES

TC 64

IEC 60364-7-712:2017
Edition 2.0 (2017-04-10)
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

EN-FR

TC 64

IEC 60364-7-714:2011
Edition 2.0 (2011-12-14)
Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations

EN-FR, ES

TC 64

IEC 60364-7-715:2011
Edition 2.0 (2011-12-14)
Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations

EN-FR

TC 64

IEC 60364-7-717:2009
Edition 2.0 (2009-07-30)
Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units

EN-FR

TC 64

IEC 60364-7-729:2007
Edition 1.0 (2007-07-16)
Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

EN-FR

TC 64

IEC 60364-7-753:2014
Edition 2.0 (2014-05-07)
Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems

EN-FR

TC 64

IEC 60368-1:2000
Edition 4.0 (2000-03-10)
Piezoelectric filters of assessed quality - Part 1: Generic specification

EN-FR

TC 49

IEC 60368-1:2000/AMD1:2004
Edition 4.0 (2004-08-17)
Amendment 1 - Piezoelectric filters of assessed quality - Part 1: Generic specification

EN-FR, EN

TC 49

IEC 60368-2-1:1988
Edition 2.0 (1988-06-30)
Piezoelectric filters - Part 2-1: Guide to the use of piezoelectric filters - Quartz crystal filters

EN-FR, RU

TC 49

IEC 60368-2-2:1996
Edition 1.0 (1996-07-25)
Piezoelectric filters - Part 2: Guide to the use of piezoelectricfilters - Section 2: Piezoelectric ceramic filters

EN-FR

TC 49

IEC 60368-4:2000
Edition 1.0 (2000-08-10)
Piezoelectric filters of assessed quality - Part 4 : Sectional specification - Capability approval

EN-FR

TC 49

IEC 60368-4-1:2000
Edition 1.0 (2000-11-09)
Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification - Capability approval

EN-FR

TC 49

IEC 60379:1987
Edition 3.0 (1987-09-30)
Methods for measuring the performance of electric storage water-heaters for household purposes

EN-FR, ES

TC 59/SC 59C

IEC 60383-1:1993
Edition 4.0 (1993-04-26)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

EN-FR, EN, FR, ES

TC 36

IEC 60383-2:1993
Edition 1.0 (1993-04-20)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

EN-FR, EN, FR, ES

TC 36

IEC 60398:2015
Edition 3.0 (2015-04-09)
Installations for electroheating and electromagnetic processing - General performance test methods

EN-FR

TC 27

IEC 60399:2004+AMD1:2008 CSV
Edition 2.1 (2008-10-21)
Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60399:2004
Edition 2.0 (2004-10-07)
Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60399:2004/AMD1:2008
Edition 2.0 (2008-07-08)
Amendment 1 - Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60400:2017
Edition 8.0 (2017-06-15)
Lampholders for tubular fluorescent lamps and starterholders

EN-FR, EN

TC 34/SC 34B

IEC 60400:2017/AMD1:2020
Edition 8.0 (2020-02-25)
Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders

EN-FR

TC 34/SC 34B

IEC 60413:1972
Edition 1.0 (1972-01-01)
Test procedures for determining physical properties of brush materials for electrical machines

EN-FR, RU

TC 2

IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV
Edition 2.2 (2012-02-10)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR

TC 34/SC 34A

IEC 60432-1:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, EN, FR

TC 34/SC 34A

IEC 60432-1:1999
Edition 2.0 (1999-08-13)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-1:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-1:1999/AMD2:2011
Edition 2.0 (2011-12-07)
Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV
Edition 2.2 (2012-05-15)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR

TC 34/SC 34A

IEC 60432-2:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

EN-FR, EN, FR

TC 34/SC 34A

IEC 60432-2:1999
Edition 2.0 (1999-10-13)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999/AMD2:2012
Edition 2.0 (2012-03-22)
Amendment 2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-3:2012
Edition 2.0 (2012-07-04)
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

EN-FR, ES

TC 34/SC 34A

IEC 60434:1973
Edition 1.0 (1973-01-01)
Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60434:1973/AMD1:1981
Edition 1.0 (1981-08-01)
Amendment 1 - Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60434:1973/AMD2:1984
Edition 1.0 (1984-01-01)
Amendment 2 - Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60436:2015
Edition 4.0 (2015-10-29)
Electric dishwashers for household use - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59A

IEC 60436:2015/COR1:2020
Edition 4.0 (2020-09-29)
Corrigendum 1 - Electric dishwashers for household use - Methods for measuring the performance

EN-FR

TC 59/SC 59A

IEC 60436:2015/AMD1:2020
Edition 4.0 (2020-05-29)
Amendment 1 - Electric dishwashers for household use - Methods for measuring the performance

EN-FR

TC 59/SC 59A

IEC 60442:1998+AMD1:2003 CSV
Edition 2.1 (2003-03-04)
Electric toasters for household and similar purposes - Methods for measuring the performance

EN-FR

TC 59/SC 59L

IEC 60442:1998
Edition 2.0 (1998-09-30)
Electric toasters for household and similar purposes - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59L

IEC 60442:1998/AMD1:2003
Edition 2.0 (2003-02-07)
Amendment 1 - Electric toasters for household and similar purposes - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59L

IEC 60456:2010
Edition 5.0 (2010-02-11)
Clothes washing machines for household use - Methods for measuring the performance

EN-FR, EN

TC 59/SC 59D

IEC 60456:2010/COR1:2011
Edition 5.0 (2011-09-29)
Corrigendum 1 - Clothes washing machines for household use - Methods for measuring the performance

EN

TC 59/SC 59D

IEC 60496:1975
Edition 1.0 (1975-01-01)
Methods for measuring the performance of electric warming plates for household and similar purposes

EN-FR, RU

TC 59/SC 59L

IEC 60496:1975/AMD1:1977
Edition 1.0 (1977-01-01)
Amendment 1 - Methods for measuring the performance of electric warming plates for household and similar purposes

EN-FR

TC 59/SC 59L

IEC 60496:1975/AMD2:1992
Edition 1.0 (1992-10-14)
Amendment 2 - Methods for measuring the performance of electric warming plates for household and similar purposes

EN-FR

TC 59/SC 59L

IEC 60507:2013
Edition 3.0 (2013-12-13)
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

EN-FR, ES

TC 36

IEC 60507:2013/COR1:2018
Edition 3.0 (2018-08-29)
Corrigendum 1 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

EN-FR

TC 36

IEC 60512-1:2018
Edition 5.0 (2018-10-22)
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

EN-FR

TC 48/SC 48B

IEC 60512-1-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-4:1997
Edition 1.0 (1997-07-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-4:1997/COR1:2000
Edition 1.0 (2000-11-15)
Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR

TC 48/SC 48B

IEC 60512-1-100:2012
Edition 3.0 (2012-02-22)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-101:2015
Edition 1.0 (2015-05-05)
Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification

EN-FR

TC 48/SC 48B

IEC 60512-2-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-2:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-5:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-6:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

EN-FR, ES

TC 48/SC 48B

IEC 60512-3-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-1:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

EN-FR, ES

TC 48/SC 48B

IEC 60512-5-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

EN-FR, ES

TC 48/SC 48B

IEC 60512-5-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-5:1997
Edition 1.0 (1997-10-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

EN-FR, ES

TC 48/SC 48B

IEC 60512-7-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

EN-FR

TC 48/SC 48B

IEC 60512-7-2:2011
Edition 1.0 (2011-11-17)
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

EN-FR

TC 48/SC 48B

IEC 60512-8-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

EN-FR

TC 48/SC 48B

IEC 60512-8-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

EN-FR

TC 48/SC 48B

IEC 60512-8-3:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

EN-FR

TC 48/SC 48B

IEC 60512-9-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

EN-FR

TC 48/SC 48B

IEC 60512-9-2:2011
Edition 1.0 (2011-11-28)
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

EN-FR

TC 48/SC 48B

IEC 60512-9-3:2011
Edition 2.0 (2011-06-22)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

EN-FR

TC 48/SC 48B

IEC 60512-9-4:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

EN-FR

TC 48/SC 48B

IEC 60512-9-5:2020
Edition 2.0 (2020-06-09)
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

EN-FR

TC 48/SC 48B

IEC 60512-10-4:2003
Edition 2.0 (2003-08-11)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-1:2019
Edition 2.0 (2019-05-16)
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

EN-FR

TC 48/SC 48B

IEC 60512-11-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-5:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-6:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-7:2003
Edition 2.0 (2003-05-22)
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-9:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-10:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-11:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-12:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-13:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-14:2003
Edition 2.0 (2003-07-24)
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

EN-FR, EN, ES

TC 48/SC 48B

IEC 60512-12-1:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-3:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-4:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-6:1996
Edition 1.0 (1996-01-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-7:2001
Edition 1.0 (2001-01-24)
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-1:2006
Edition 2.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-2:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-4:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-5:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-6:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-7:1997
Edition 1.0 (1997-10-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

EN-FR, ES

TC 48/SC 48B

IEC 60512-15-1:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

EN-FR

TC 48/SC 48B

IEC 60512-15-2:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

EN-FR

TC 48/SC 48B

IEC 60512-15-3:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

EN-FR

TC 48/SC 48B

IEC 60512-15-4:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

EN-FR

TC 48/SC 48B

IEC 60512-15-5:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

EN-FR

TC 48/SC 48B

IEC 60512-15-6:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

EN-FR

TC 48/SC 48B

IEC 60512-15-7:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

EN-FR

TC 48/SC 48B

IEC 60512-15-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

EN-FR, ES

TC 48/SC 48B

IEC 60512-16-1:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

EN-FR

TC 48/SC 48B

IEC 60512-16-2:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

EN-FR

TC 48/SC 48B

IEC 60512-16-3:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

EN-FR

TC 48/SC 48B

IEC 60512-16-4:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

EN-FR

TC 48/SC 48B

IEC 60512-16-5:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

EN-FR

TC 48/SC 48B

IEC 60512-16-6:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

EN-FR

TC 48/SC 48B

IEC 60512-16-7:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

EN-FR

TC 48/SC 48B

IEC 60512-16-8:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

EN-FR

TC 48/SC 48B

IEC 60512-16-9:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

EN-FR

TC 48/SC 48B

IEC 60512-16-11:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

EN-FR

TC 48/SC 48B

IEC 60512-16-13:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

EN-FR

TC 48/SC 48B

IEC 60512-16-14:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-16:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-17:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-18:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

EN-FR

TC 48/SC 48B

IEC 60512-16-20:1996
Edition 1.0 (1996-07-31)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

EN-FR, ES

TC 48/SC 48B

IEC 60512-16-21:2012
Edition 1.0 (2012-05-07)
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

EN-FR

TC 48/SC 48B

IEC 60512-17-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

EN-FR

TC 48/SC 48B

IEC 60512-17-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

EN-FR

TC 48/SC 48B

IEC 60512-17-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

EN-FR

TC 48/SC 48B

IEC 60512-17-4:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

EN-FR

TC 48/SC 48B

IEC 60512-19-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

EN-FR

TC 48/SC 48B

IEC 60512-19-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

EN-FR, ES

TC 48/SC 48B

IEC 60512-20-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

EN-FR

TC 48/SC 48B

IEC 60512-20-2:2000
Edition 1.0 (2000-04-13)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

EN-FR, ES

TC 48/SC 48B

IEC 60512-20-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

EN-FR

TC 48/SC 48B

IEC 60512-21-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

EN-FR

TC 48/SC 48B

IEC 60512-22-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

EN-FR

TC 48/SC 48B

IEC 60512-23-2:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

EN-FR

TC 48/SC 48B

IEC 60512-23-3:2018
Edition 2.0 (2018-12-14)
Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

EN-FR

TC 48/SC 48B

IEC 60512-23-4:2001
Edition 1.0 (2001-06-19)
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

EN-FR, ES

TC 48/SC 48B

IEC 60512-23-7:2005
Edition 1.0 (2005-01-27)
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

EN-FR, ES

TC 48/SC 48B

IEC 60512-24-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

EN-FR

TC 48/SC 48B

IEC 60512-25-1:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-2:2002
Edition 1.0 (2002-03-12)
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-3:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-4:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-5:2004
Edition 1.0 (2004-07-15)
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-6:2004
Edition 1.0 (2004-05-26)
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-7:2004
Edition 1.0 (2004-12-15)
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-9:2008
Edition 1.0 (2008-08-28)
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008+AMD1:2011 CSV
Edition 1.1 (2011-05-25)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008/AMD1:2011
Edition 1.0 (2011-03-14)
Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-27-100:2011
Edition 1.0 (2011-12-07)
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

EN-FR

TC 48/SC 48B

IEC PAS 60512-27-200:2018
Edition 1.0 (2018-10-19)
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

EN

TC 48/SC 48B

IEC 60512-28-100:2019
Edition 2.0 (2019-11-15)
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

EN-FR

TC 48/SC 48B

IEC 60512-29-100:2015
Edition 1.0 (2015-03-05)
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

EN-FR

TC 48/SC 48B

IEC 60512-99-001:2012
Edition 1.0 (2012-08-13)
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

EN-FR

TC 48/SC 48B

IEC 60512-99-002:2019
Edition 1.0 (2019-03-08)
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

EN-FR

TC 48/SC 48B

IEC 60519-1:2020
Edition 6.0 (2020-03-11)
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

EN-FR

TC 27

IEC 60519-3:2005
Edition 3.0 (2005-02-17)
Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations

EN-FR, ES

TC 27

IEC 60519-6:2022
Edition 4.0 (2022-01-20)
Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment

EN-FR

TC 27

IEC 60519-10:2013
Edition 2.0 (2013-02-22)
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

EN-FR

TC 27

IEC 60519-11:2007
Edition 2.0 (2007-06-22)
Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

EN-FR, ES

TC 27

IEC 60519-12:2016
Edition 2.0 (2016-12-15)
Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating

EN-FR

TC 27

IEC 60530:1975
Edition 1.0 (1975-01-01)
Methods for measuring the performance of electric kettles and jugs for household and similar use

EN-FR, EN, FR, RU

TC 59/SC 59L

IEC 60530:1975/AMD1:1992
Edition 1.0 (1992-10-14)
Amendment 1 - Methods for measuring the performance of electric kettles and jugs for household and similar use

EN-FR, EN, FR

TC 59/SC 59L

IEC 60530:1975/AMD2:2004
Edition 1.0 (2004-05-14)
Amendment 2 - Methods for measuring the performance of electric kettles and jugs for household and similar use

EN-FR, EN, FR

TC 59/SC 59L

IEC 60531:1999
Edition 2.0 (1999-01-07)
Household electric thermal storage room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60560:1977
Edition 1.0 (1977-01-01)
Definitions and terminology of brush-holders for electrical machines

EN-FR, RU

TC 2

IEC 60570:2003
Edition 4.0 (2003-01-30)
Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60570:2003/AMD1:2017
Edition 4.0 (2017-04-05)
Amendment 1 - Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60570:2003/AMD2:2019
Edition 4.0 (2019-12-11)
Amendment 2 - Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC TR 60575:1977
Edition 1.0 (1977-01-01)
Thermal-mechanical performance test and mechanical performance test on string insulator units

EN-FR

TC 36

IEC 60598-1:2020
Edition 9.0 (2020-08-17)
Luminaires - Part 1: General requirements and tests

EN-FR, EN

TC 34/SC 34D

IEC 60598-2-1:2020
Edition 2.0 (2020-01-28)
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires

EN-FR

TC 34/SC 34D

IEC 60598-2-2:2011
Edition 3.0 (2011-11-08)
Luminaires - Part 2-2: Particular requirements - Recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-3:2002+AMD1:2011 CSV
Edition 3.1 (2011-11-17)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR

TC 34/SC 34D

IEC 60598-2-3:2002
Edition 3.0 (2002-12-04)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR, EN, FR, ES

TC 34/SC 34D

IEC 60598-2-3:2002/AMD1:2011
Edition 3.0 (2011-04-14)
Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-4:2017
Edition 3.0 (2017-04-21)
Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires

EN-FR, EN, ES

TC 34/SC 34D

IEC 60598-2-5:2015
Edition 3.0 (2015-08-06)
Luminaires - Part 2-5: Particular requirements - Floodlights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-8:2013
Edition 3.0 (2013-04-29)
Luminaires - Part 2-8: Particular requirements - Handlamps

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-10:2003
Edition 2.0 (2003-05-19)
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-11:2013
Edition 2.0 (2013-05-16)
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-12:2013
Edition 2.0 (2013-04-29)
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006+AMD1:2011 CSV
Edition 1.1 (2012-02-10)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR

TC 34/SC 34D

IEC 60598-2-13:2006
Edition 1.0 (2006-06-13)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006/AMD1:2011
Edition 1.0 (2011-12-07)
Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006/AMD2:2016
Edition 1.0 (2016-05-25)
Amendment 2 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-14:2009
Edition 1.0 (2009-02-05)
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-17:2017
Edition 2.0 (2017-05-30)
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)

EN-FR

TC 34/SC 34D

IEC 60598-2-18:1993
Edition 2.0 (1993-04-26)
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-18:1993/COR1:2013
Edition 2.0 (2013-03-21)
Corrigendum 1 - Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

EN-FR

TC 34/SC 34D

IEC 60598-2-18:1993/AMD1:2011
Edition 2.0 (2011-12-14)
Amendment 1 - Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-19:1981
Edition 1.0 (1981-01-01)
Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-19:1981/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-19:1981/AMD2:1997
Edition 1.0 (1997-12-11)
Amendment 2 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-20:2014
Edition 4.0 (2014-11-25)
Luminaires - Part 2-20: Particular requirements - Lighting chains

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-20:2014/COR1:2016
Edition 4.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-20: Particular requirements - Lighting chains

EN-FR

TC 34/SC 34D

IEC 60598-2-21:2014
Edition 1.0 (2014-11-25)
Luminaires - Part 2-21: Particular requirements - Rope lights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-21:2014/COR1:2016
Edition 1.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-21: Particular requirements - Rope lights

EN-FR

TC 34/SC 34D

IEC 60598-2-22:2021
Edition 5.0 (2021-12-06)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

EN-FR

TC 34/SC 34D

IEC 60598-2-23:2020
Edition 2.0 (2020-07-20)
Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources

EN-FR

TC 34/SC 34D

IEC 60598-2-24:2013
Edition 2.0 (2013-06-19)
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-25:1994
Edition 1.0 (1994-08-17)
Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-25:1994/AMD1:2004
Edition 1.0 (2004-09-28)
Amendment 1 - Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings

EN-FR

TC 34/SC 34D

IEC 60603-1:1991
Edition 2.0 (1991-06-28)
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR

TC 48/SC 48B

IEC 60603-1:1991/AMD1:1992
Edition 2.0 (1992-06-15)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR

TC 48/SC 48B

IEC 60603-2:1995
Edition 3.0 (1995-09-22)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR

TC 48/SC 48B

IEC 60603-2:1995/AMD1:2000
Edition 3.0 (2000-08-18)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR

TC 48/SC 48B

IEC 60603-3:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-4:1987
Edition 1.0 (1987-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-5:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-6:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-7-1:2011
Edition 3.0 (2011-04-07)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

EN-FR

TC 48/SC 48B

IEC 60603-7-2:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-3:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-4:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-5:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-7:2010
Edition 3.0 (2010-05-31)
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-41:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-51:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-71:2010
Edition 1.0 (2010-06-28)
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-81:2015
Edition 1.0 (2015-12-16)
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-81:2015/COR1:2017
Edition 1.0 (2017-06-30)
Corrigendum 1 - Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-82:2016
Edition 1.0 (2016-08-25)
Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-8:1990
Edition 1.0 (1990-12-01)
Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

EN-FR, ES

TC 48/SC 48B

IEC 60603-11:1992
Edition 1.0 (1992-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

EN-FR

TC 48/SC 48B

IEC 60603-12:1992
Edition 1.0 (1992-06-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

EN-FR

TC 48/SC 48B

IEC 60603-13:1995
Edition 1.0 (1995-01-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

EN-FR

TC 48/SC 48B

IEC 60603-14:1998
Edition 1.0 (1998-02-26)
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

EN-FR

TC 48/SC 48B

IEC TR 60616:1978
Edition 1.0 (1978-01-01)
Terminal and tapping markings for power transformers

EN-FR, RU

TC 14

IEC 60619:1993
Edition 2.0 (1993-02-15)
Electrically operated food preparation appliances - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59L

IEC 60619:1993/AMD1:1995
Edition 2.0 (1995-08-30)
Amendment 1 - Electrically operated food preparation appliances - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59L

IEC 60619:1993/AMD2:2004
Edition 2.0 (2004-06-23)
Amendment 2 - Electrically operated food preparation appliances - Methods for measuring the performance

EN-FR, ES

TC 59/SC 59L

IEC 60630:2005 CSV
Edition 2.5 (2005-04-25)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:2002 CSV
Edition 2.4 (2002-12-19)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994+AMD1:1997+AMD2:1998+AMD3:1999 CSV
Edition 2.3 (2001-05-25)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994
Edition 2.0 (1994-09-09)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD1:1997
Edition 2.0 (1997-06-05)
Amendment 1 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD2:1998
Edition 2.0 (1998-02-27)
Amendment 2 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD3:1999
Edition 2.0 (1999-07-09)
Amendment 3 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD4:2002
Edition 2.0 (2002-11-28)
Amendment 4 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD5:2005
Edition 2.0 (2005-03-17)
Amendment 5 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD6:2009
Edition 2.0 (2009-05-19)
Amendment 6 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD7:2014
Edition 2.0 (2014-06-27)
Amendment 7 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60633:2019
Edition 3.0 (2019-04-25)
High-voltage direct current (HVDC) transmission - Vocabulary

EN-FR

TC 22/SC 22F

IEC 60633:2019/COR1:2020
Edition 3.0 (2020-02-26)
Corrigendum 1 - High-voltage direct current (HVDC) transmission - Vocabulary

EN-FR

TC 22/SC 22F

IEC 60642-2:1994
Edition 1.0 (1994-02-08)
Piezoelectric ceramic resonator units - Part 2: Guide to the use of piezoelectric ceramic resonator units

EN-FR

TC 49

IEC 60660:1999
Edition 2.0 (1999-10-29)
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

EN-FR, ES

TC 36

IEC 60661:1999+AMD1:2003+AMD2:2005 CSV
Edition 2.2 (2006-02-21)
Methods for measuring the performance of electric household coffee makers

EN-FR, ES

TC 59/SC 59L

IEC 60661:1999+AMD1:2003 CSV
Edition 2.1 (2003-03-04)
Methods for measuring the performance of electric household coffee makers

EN-FR

TC 59/SC 59L

IEC 60661:1999
Edition 2.0 (1999-12-22)
Methods for measuring the performance of electric household coffee makers

EN-FR, ES

TC 59/SC 59L

IEC 60661:1999/AMD1:2003
Edition 2.0 (2003-02-07)
Amendment 1 - Methods for measuring the performance of electric household coffee makers

EN-FR, ES

TC 59/SC 59L

IEC 60661:1999/AMD2:2005
Edition 2.0 (2005-11-23)
Amendment 2 - Methods for measuring the performance of electric household coffee makers

EN-FR, ES

TC 59/SC 59L

IEC 60662:2011
Edition 2.0 (2011-02-23)
High-pressure sodium vapour lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60664-1:2020
Edition 3.0 (2020-05-26)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR, ES

TC 109

IEC 60664-1:2020/COR1:2020
Edition 3.0 (2020-10-27)
Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR

TC 109

IEC TR 60664-2-1:2011
Edition 2.0 (2011-01-31)
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-1:2011/COR1:2011
Edition 2.0 (2011-10-24)
Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-2:2002
Edition 1.0 (2002-01-22)
Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide

EN

TC 109

IEC 60664-3:2016
Edition 3.0 (2016-11-04)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

EN-FR, ES

TC 109

IEC 60664-4:2005
Edition 2.0 (2005-09-15)
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress

EN-FR, ES

TC 109

IEC 60665:2018
Edition 2.0 (2018-11-23)
A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance

EN-FR, ES

TC 59/SC 59L

IEC 60675:1994+AMD1:1998 CSV
Edition 2.1 (1998-11-24)
Household electric direct-acting room heaters - Methods for measuring performance

EN-FR

TC 59/SC 59C

IEC 60675:1994
Edition 2.0 (1994-08-30)
Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60675:1994/AMD1:1998
Edition 2.0 (1998-07-09)
Amendment 1 - Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60675:1994/AMD2:2018
Edition 2.0 (2018-04-20)
Amendment 2 - Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, EN, ES

TC 59/SC 59C

IEC 60679-1:2017
Edition 4.0 (2017-07-26)
Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification

EN-FR, EN

TC 49

IEC 60679-2:1981
Edition 1.0 (1981-01-01)
Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators

EN-FR, RU

TC 49

IEC 60679-4:1997
Edition 1.0 (1997-11-28)
Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional Specification - Capability approval

EN-FR

TC 49

IEC 60679-4-1:1998
Edition 1.0 (1998-02-19)
Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification - Capability approval

EN-FR

TC 49

IEC 60679-5:1998
Edition 1.0 (1998-04-15)
Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification - Qualification approval

EN-FR

TC 49

IEC 60679-5-1:1998
Edition 1.0 (1998-04-29)
Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification - Qualification approval

EN-FR

TC 49

IEC 60682:1980
Edition 1.0 (1980-01-01)
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR, RU

TC 34/SC 34A

IEC 60682:1980/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR

TC 34/SC 34A

IEC 60682:1980/AMD2:1997
Edition 1.0 (1997-04-23)
Amendment 2 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR, ES

TC 34/SC 34A

IEC 60689:2008
Edition 2.0 (2008-11-27)
Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values

EN-FR, EN

TC 49

IEC 60695-1-10:2016
Edition 2.0 (2016-11-18)
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines

EN-FR, ES, RU

TC 89

IEC 60695-1-11:2014
Edition 2.0 (2014-10-08)
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

EN-FR, ES

TC 89

IEC 60695-1-12:2015
Edition 1.0 (2015-01-20)
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering

EN-FR, RU

TC 89

IEC TS 60695-1-14:2017
Edition 1.0 (2017-12-07)
Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

EN, RU

TC 89

IEC 60695-1-20:2016
Edition 1.0 (2016-01-27)
Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

EN-FR, ES

TC 89

IEC 60695-1-21:2016
Edition 1.0 (2016-09-07)
Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

EN-FR, ES

TC 89

IEC 60695-1-30:2017
Edition 3.0 (2017-02-21)
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

EN-FR, ES

TC 89

IEC 60695-1-40:2013
Edition 1.0 (2013-11-19)
Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids

EN-FR, ES, RU

TC 89

IEC 60695-2-10:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

EN-FR

TC 89

IEC 60695-2-11:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)

EN-FR

TC 89

IEC 60695-2-12:2021
Edition 3.0 (2021-10-08)
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

EN-FR

TC 89

IEC 60695-2-13:2021
Edition 3.0 (2021-08-24)
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

EN-FR

TC 89

IEC 60695-5-1:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

EN-FR

TC 89

IEC TS 60695-5-2:2021
Edition 3.0 (2021-06-03)
Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods

EN

TC 89

IEC 60695-6-1:2021
Edition 3.0 (2021-08-05)
Fire hazard testing - Part 6-1: Smoke obscuration - General guidance

EN-FR

TC 89

IEC 60695-6-2:2018
Edition 2.0 (2018-06-05)
Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods

EN-FR, ES

TC 89

IEC 60695-7-1:2010
Edition 3.0 (2010-06-28)
Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance

EN-FR, ES

TC 89

IEC 60695-7-2:2021
Edition 2.0 (2021-10-28)
Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

EN-FR

TC 89

IEC 60695-7-3:2011
Edition 1.0 (2011-08-30)
Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results

EN-FR, ES

TC 89

IEC 60695-8-1:2016
Edition 3.0 (2016-11-15)
Fire hazard testing - Part 8-1: Heat release - General guidance

EN-FR, ES

TC 89

IEC 60695-8-2:2016
Edition 1.0 (2016-11-16)
Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

EN-FR, ES

TC 89

IEC 60695-9-1:2013
Edition 3.0 (2013-04-29)
Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

EN-FR, ES

TC 89

IEC 60695-9-2:2021
Edition 2.0 (2021-08-25)
Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

EN-FR

TC 89

IEC 60695-10-2:2014
Edition 3.0 (2014-02-19)
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

EN-FR, ES

TC 89

IEC 60695-10-3:2016
Edition 2.0 (2016-09-07)
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

EN-FR, ES

TC 89

IEC 60695-11-2:2017
Edition 3.0 (2017-06-08)
Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

EN-FR, ES

TC 89

IEC 60695-11-3:2012
Edition 1.0 (2012-08-13)
Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods

EN-FR, ES, RU

TC 89

IEC 60695-11-4:2011
Edition 1.0 (2011-09-27)
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method

EN-FR, ES, RU

TC 89

IEC 60695-11-5:2016
Edition 2.0 (2016-12-06)
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

EN-FR, ES

TC 89

IEC 60695-11-10:2013
Edition 2.0 (2013-05-21)
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

EN-FR, ES

TC 89

IEC 60695-11-10:2013/COR1:2014
Edition 2.0 (2014-09-03)
Corrigendum 1 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

EN-FR

TC 89

IEC 60695-11-20:2015
Edition 2.0 (2015-04-22)
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

EN-FR, ES

TC 89

IEC 60695-11-20:2015/COR1:2016
Edition 2.0 (2016-01-27)
Corrigendum 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

EN-FR

TC 89

IEC TR 60695-11-30:2001
Edition 1.0 (2001-08-28)
Fire hazard testing - Part 11-30: Test flames - History and development from 1979 to 1999

EN-FR

TC 89

IEC TS 60695-11-40:2021
Edition 2.0 (2021-06-24)
Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance

EN

TC 89

IEC 60700-1:2015
Edition 2.0 (2015-07-28)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

EN-FR

TC 22/SC 22F

IEC 60700-1:2015/COR1:2017
Edition 2.0 (2017-01-25)
Corrigendum 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

EN-FR

TC 22/SC 22F

IEC 60700-1:2015/AMD1:2021
Edition 2.0 (2021-09-15)
Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

EN-FR

TC 22/SC 22F

IEC 60700-2:2016
Edition 1.0 (2016-06-17)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

EN-FR

TC 22/SC 22F

IEC 60700-2:2016/COR1:2017
Edition 1.0 (2017-06-22)
Corrigendum 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

EN-FR

TC 22/SC 22F

IEC 60700-2:2016/AMD1:2021
Edition 1.0 (2021-08-23)
Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

EN-FR

TC 22/SC 22F

IEC 60702-1:2002
Edition 3.0 (2002-02-14)
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables

EN-FR, ES

TC 20

IEC 60702-1:2002/AMD1:2015
Edition 3.0 (2015-01-15)
Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables

EN-FR, ES

TC 20

IEC 60702-2:2002
Edition 2.0 (2002-02-12)
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

EN-FR, ES

TC 20

IEC 60702-2:2002/AMD1:2015
Edition 2.0 (2015-01-15)
Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

EN-FR, ES

TC 20

IEC 60702-3:2016
Edition 1.0 (2016-04-13)
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guide for use

EN-FR, ES

TC 20

IEC 60704-1:2021
Edition 4.0 (2021-03-11)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements

EN-FR

TC 59

IEC 60704-2-2:2009
Edition 2.0 (2009-07-23)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters

EN-FR, EN, ES

TC 59/SC 59C

IEC 60704-2-3:2017
Edition 3.0 (2017-04-10)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers

EN-FR, ES

TC 59/SC 59A

IEC 60704-2-4:2011
Edition 3.0 (2011-11-17)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors

EN-FR, ES

TC 59/SC 59D

IEC 60704-2-5:2005
Edition 2.0 (2005-07-06)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters

EN-FR, ES

TC 59/SC 59C

IEC 60704-2-5:2005/AMD1:2014
Edition 2.0 (2014-10-17)
Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters

EN-FR, ES

TC 59/SC 59C

IEC 60704-2-6:2012
Edition 3.0 (2012-03-27)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers

EN-FR, ES

TC 59/SC 59D

IEC 60704-2-7:2020
Edition 2.0 (2020-01-23)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans

EN-FR, ES

TC 59/SC 59L

IEC 60704-2-8:2020
Edition 2.0 (2020-03-09)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers

EN-FR, ES

TC 59/SC 59L

IEC 60704-2-9:2003
Edition 1.0 (2003-06-13)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances

EN-FR, ES

TC 59/SC 59L

IEC 60704-2-10:2011
Edition 2.0 (2011-09-27)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these

EN-FR, ES

TC 59/SC 59K

IEC 60704-2-11:1998
Edition 1.0 (1998-12-10)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operated food preparation

EN-FR, ES

TC 59/SC 59L

IEC 60704-2-13:2016
Edition 3.0 (2016-10-26)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors

EN-FR, ES

TC 59/SC 59K

IEC 60704-2-14:2013
Edition 2.0 (2013-01-30)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

EN-FR, EN, ES

TC 59/SC 59M

IEC 60704-2-14:2013/AMD1:2019
Edition 2.0 (2019-03-29)
Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

EN-FR, ES

TC 59/SC 59M

IEC PAS 60704-2-15:2008
Edition 1.0 (2008-08-12)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers

EN

TC 59

IEC PAS 60704-2-15:2008/COR1:2012
Edition 1.0 (2012-07-25)
Corrigendum 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers

EN

TC 59

IEC 60704-2-16:2019
Edition 1.0 (2019-05-20)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers

EN-FR, ES

TC 59/SC 59D

IEC 60704-3:2019
Edition 3.0 (2019-05-28)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

EN-FR, ES

TC 59

IEC 60705:2010
Edition 4.0 (2010-04-29)
Household microwave ovens - Methods for measuring performance

EN-FR, ES

TC 59/SC 59K

IEC 60705:2010/AMD1:2014
Edition 4.0 (2014-06-30)
Amendment 1 - Household microwave ovens - Methods for measuring performance

EN-FR, ES

TC 59/SC 59K

IEC 60705:2010/AMD2:2018
Edition 4.0 (2018-05-30)
Amendment 2 - Household microwave ovens - Methods for measuring performance

EN-FR, ES

TC 59/SC 59K

IEC 60708:2005
Edition 1.0 (2005-06-24)
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

EN-FR, EN, ES

TC 46/SC 46C

IEC 60708:2005/COR1:2016
Edition 1.0 (2016-08-12)
Corrigendum 1 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

EN-FR

TC 46/SC 46C

IEC 60715:2017
Edition 2.0 (2017-07-28)
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

EN-FR

TC 121/SC 121A

IEC 60724:2000+AMD1:2008 CSV
Edition 3.1 (2008-11-13)
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

EN-FR

TC 20

IEC 60724:2000
Edition 3.0 (2000-10-09)
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

EN-FR, ES

TC 20

IEC 60724:2000/AMD1:2008
Edition 3.0 (2008-09-24)
Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

EN-FR, ES

TC 20

IEC 60734:2012
Edition 4.0 (2012-06-27)
Household electrical appliances - Performance - Water for testing

EN-FR, ES

TC 59/SC 59D

IEC 60754-1:2011
Edition 3.0 (2011-11-17)
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

EN-FR, ES

TC 20

IEC 60754-1:2011/COR1:2013
Edition 3.0 (2013-11-05)
Corrigendum 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

EN-FR

TC 20

IEC 60754-1:2011/AMD1:2019
Edition 3.0 (2019-11-25)
Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

EN-FR, ES

TC 20

IEC 60754-2:2011
Edition 2.0 (2011-11-17)
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity

EN-FR, ES

TC 20

IEC 60754-2:2011/AMD1:2019
Edition 2.0 (2019-11-25)
Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity

EN-FR, ES

TC 20

IEC 60754-3:2018
Edition 1.0 (2018-03-19)
Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography

EN-FR, EN, ES

TC 20

IEC TR 60778:1984
Edition 1.0 (1984-01-01)
Brush-holders for slip-rings, Group R - type RA

EN-FR

TC 2

IEC 60793-1-1:2017
Edition 4.0 (2017-01-25)
Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance

EN-FR, EN, ES

TC 86/SC 86A

IEC 60793-1-20:2014
Edition 2.0 (2014-10-10)
Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-20:2014/COR1:2016
Edition 2.0 (2016-03-04)
Corrigendum 1 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry

EN-FR

TC 86/SC 86A

IEC 60793-1-21:2001
Edition 1.0 (2001-08-30)
Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry

EN-FR

TC 86/SC 86A

IEC 60793-1-22:2001
Edition 1.0 (2001-08-30)
Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement

EN-FR

TC 86/SC 86A

IEC 60793-1-30:2010
Edition 2.0 (2010-05-19)
Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test

EN-FR, EN

TC 86/SC 86A

IEC 60793-1-31:2019
Edition 3.0 (2019-02-06)
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength

EN-FR

TC 86/SC 86A

IEC 60793-1-32:2018
Edition 3.0 (2018-11-16)
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-33:2017
Edition 2.0 (2017-08-16)
Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-34:2021
Edition 3.0 (2021-02-10)
Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl

EN-FR

TC 86/SC 86A

IEC 60793-1-40:2019
Edition 2.0 (2019-03-27)
Optical fibres - Part 1-40: Attenuation measurement methods

EN-FR

TC 86/SC 86A

IEC 60793-1-41:2010
Edition 3.0 (2010-08-31)
Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth

EN-FR

TC 86/SC 86A

IEC 60793-1-42:2013
Edition 3.0 (2013-01-24)
Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion

EN-FR

TC 86/SC 86A

IEC 60793-1-43:2015
Edition 2.0 (2015-03-27)
Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement

EN-FR, EN, ES

TC 86/SC 86A