SDG 13 - Climate change

Take urgent action to combat climate change and its impacts

Strengthen resilience, reduce disaster impact

The first IEC President, Lord Kelvin used to say: “If you can’t measure it, you can’t improve it.” The majority of IEC International Standards not only enable the measurement of the efficiency, performance and safety of systems, they also provide the technical basis for further improvement.

IEC International Standards, together with testing and certification, help countries to adopt more sustainable technologies. They also help strengthen the disaster resilience of infrastructure, reducing disaster risks and accelerating disaster recovery, limiting overall disaster impact. IEC work provides the globally relevant, solid technical foundation to make new, sustainable energy solutions broadly accessible.

A myriad of IEC International Standards are used in the building of infrastructure, including for example in power generation or water management. Several IEC TCs develop the standards that ensure that alarm systems are able to operate under extreme conditions, still others ensure the safety of workers during repair operations, for example live working on downed power lines or the installation of electricity generators.

55 IEC TC/SCs, 3 IEC SyCs and all 4 IEC CA Systems contribute to SDG 13.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...
climate_change_cover.jpg

IEC and climate change

Over the past 150 years, the earth’s average temperature has increased steadily, because of climate change.
climateaction-thumb.jpg

Climate change and environment

Our climate is in crisis. Now more than ever, it is time to protect what matters.
climate action kit

IEC and ISO Climate action kit

Access here

IEC case studies

Access here

 

IEC work addresses topics related to climate action

Resilience

Resilience

Emergency lighting

Emergency lighting

Sustainability

Sustainability

Smart manufacturing

Smart manufacturing

Disaster prevention

Disaster prevention

Disaster recovery

Disaster recovery

Smart cities

Smart cities

Sensor

Sensor

Risk management

Risk management

Smart energy

Smart energy

Alarm systems

Alarm systems

Environmental conditions classification

Environmental condition classification

Smart transportation

Smart transportation

IEC work directly impacts the following SDG targets

13.1 Strengthen resilience and adaptive capacity to hazards and natural disasters

A myriad of IEC International Standards from many IEC TCs apply to the development of infrastructure, including for example power generation or water management. IEC work helps strengthen the disaster resilience of infrastructure through built-in safety mechanisms, processes and minimum requirements. During disasters, certified alarm systems are able to operate even under extreme conditions.

  • IEC TC 4: Hydraulic turbines;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 37 and 2 SCs: Surge arresters;
  • IEC TC 46 and 3 SCs: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 59 and 7 SCs: Performance of household and similar electrical appliances;
  • IEC TC 61 and 5 SCs: Safety of household and similar electrical appliances;
  • IEC TC 69: Electric road vehicles and electric industrial trucks;
  • IEC TC 79: Alarm and electronic security systems;
  • IEC TC 81: Lightning protection;
  • IEC TC 82: Solar photovoltaic energy systems;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 88: Wind energy generation;
  • IEC TC 100: Audio, video and multimedia systems and equipment, in particular, IEC TC 100/TA 5: Cable networks for television signals, sound signals and interactive services;
  • IEC TC 100/TA 19: Environmental and energy aspects for multimedia systems and equipment;
  • IEC TC 100/TA 20: Analogue and digital audio;
  • IEC TC 103: Equipment for radio communication;
  • IEC TC 113: Nanotechnology for electrotechnical products and systems;
  • IEC TC 114: Marine energy - Wave, tidal and other water current converters;
  • ISO/IEC JTC 1/SC 7: Software and systems engineering;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.

13.3 Improve institutional capacity on climate change mitigation, adaptation, impact reduction

Countries who implement IEC International Standards enjoy easier access to sustainable technologies and are better able to mitigate the impact of disasters.

  • IEC TC 56: Dependability, and IEC TC 57: Power systems management and associated information exchange, help improve the dependability and resilience of infrastructure;
  • IEC TC 65 and 4 SCs: Industrial-process measurement, control and automation;
  • IEC TC 78: Disaster recovery (live working);
  • IEC TC 79: Alarm and electronic security systems;
  • IEC TC 100: Audio, video and multimedia systems and equipment;
  • IEC TC 104: Environmental conditions, classification and methods of test;
  • IEC TC 111: Environmental standardization;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • IEC SyC SM: Smart manufacturing;
  • ISO/IEC JTC 1/SC 27: Information security, cybersecurity and privacy protection.

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

IEC 60034-1:2017
Edition 13.0 (2017-05-09)
Rotating electrical machines - Part 1: Rating and performance

EN-FR

TC 2

IEC 60034-2-1:2014
Edition 2.0 (2014-06-27)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

EN-FR

TC 2

IEC 60034-2-2:2010
Edition 1.0 (2010-03-16)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

EN-FR

TC 2

IEC 60034-2-3:2020
Edition 1.0 (2020-03-19)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

EN-FR

TC 2

IEC 60034-3:2020
Edition 7.0 (2020-05-26)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

EN-FR

TC 2

IEC 60034-4-1:2018
Edition 1.0 (2018-04-27)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests

EN-FR

TC 2

IEC 60034-5:2020
Edition 5.0 (2020-04-29)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN-FR, EN

TC 2

IEC 60034-6:1991
Edition 2.0 (1991-10-01)
Rotating electrical machines - Part 6: Methods of cooling (IC Code)

EN-FR, ES

TC 2

IEC 60034-8:2007
Edition 3.0 (2007-06-22)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-8:2007/AMD1:2014
Edition 3.0 (2014-03-20)
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-12:2016
Edition 3.0 (2016-11-23)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

EN-FR

TC 2

IEC 60034-14:2018
Edition 4.0 (2018-08-17)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

EN-FR

TC 2

IEC 60034-15:2009
Edition 3.0 (2009-03-17)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

EN-FR, ES

TC 2

IEC 60034-16-1:2011
Edition 2.0 (2011-05-25)
Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

EN-FR, ES

TC 2

IEC TR 60034-16-2:1991
Edition 1.0 (1991-02-15)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

EN-FR, ES

TC 2

IEC TS 60034-16-3:1996
Edition 1.0 (1996-02-14)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

EN-FR

TC 2

IEC 60034-18-1:2010
Edition 2.0 (2010-03-10)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

EN-FR

TC 2

IEC 60034-18-21:2012
Edition 2.0 (2012-09-19)
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

EN-FR

TC 2

IEC 60034-18-31:2012
Edition 2.0 (2012-06-25)
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

EN-FR, ES

TC 2

IEC 60034-18-32:2010
Edition 1.0 (2010-10-13)
Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance

EN-FR

TC 2

IEC TS 60034-18-33:2010
Edition 2.0 (2010-07-22)
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

EN

TC 2

IEC 60034-18-34:2012
Edition 1.0 (2012-06-14)
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

EN-FR, ES

TC 2

IEC 60034-18-41:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019
Edition 1.0 (2019-06-25)
Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019/COR1:2020
Edition 1.0 (2020-12-11)
Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-42:2017
Edition 1.0 (2017-02-07)
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-18-42:2017/AMD1:2020
Edition 1.0 (2020-08-18)
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-19:2014
Edition 2.0 (2014-09-25)
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

EN-FR, ES

TC 2

IEC TS 60034-20-1:2002
Edition 1.0 (2002-01-18)
Rotating electrical machines - Part 20-1: Control motors - Stepping motors

EN-FR

TC 2

IEC 60034-22:2009
Edition 2.0 (2009-10-28)
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

EN-FR, ES

TC 2

IEC 60034-23:2019
Edition 1.0 (2019-01-24)
Rotating electrical machines - Part 23: Repair, overhaul and reclamation

EN-FR

TC 2

IEC TS 60034-24:2009
Edition 1.0 (2009-09-16)
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

EN-FR

TC 2

IEC TS 60034-25:2014
Edition 3.0 (2014-10-08)
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide

EN-FR

TC 2

IEC 60034-26:2006
Edition 1.0 (2006-07-24)
Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR, ES

TC 2

IEC 60034-26:2006/COR1:2014
Edition 1.0 (2014-09-03)
Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR

TC 2

IEC 60034-27-1:2017
Edition 1.0 (2017-12-13)
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

EN-FR

TC 2

IEC TS 60034-27-2:2012
Edition 1.0 (2012-03-22)
Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

EN

TC 2

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

EN-FR, ES

TC 2

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

EN-FR, ES

TC 2

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

EN-FR

TC 2

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

EN

TC 2

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

EN

TC 2

IEC 60041:1991
Edition 3.0 (1991-11-30)
Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

EN-FR, EN, FR

TC 4

IEC 60061-1:2005 CSV
Edition 3.4 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD21:1998
Edition 3.0 (1998-03-16)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD22:1999
Edition 3.0 (1999-02-23)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD23:1999
Edition 3.0 (1999-07-29)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD24:2000
Edition 3.0 (2000-05-18)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD26:2001
Edition 3.0 (2001-02-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD27:2001
Edition 3.0 (2001-10-26)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD28:2002
Edition 3.0 (2002-05-03)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD29:2002
Edition 3.0 (2002-05-13)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD30:2002
Edition 3.0 (2002-10-29)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD31:2003
Edition 3.0 (2003-05-15)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD32:2003
Edition 3.0 (2003-09-03)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD33:2003
Edition 3.0 (2003-10-30)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD34:2004
Edition 3.0 (2004-07-26)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD35:2004
Edition 3.0 (2004-11-25)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD36:2005
Edition 3.0 (2005-10-03)
Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD37:2006
Edition 3.0 (2006-05-30)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD38:2006
Edition 3.0 (2006-12-14)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD39:2007
Edition 3.0 (2007-04-30)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD40:2008
Edition 3.0 (2008-07-18)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD41:2009
Edition 3.0 (2009-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD42:2009
Edition 3.0 (2009-07-24)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD43:2010
Edition 3.0 (2010-02-22)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD44:2010
Edition 3.0 (2010-04-29)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD45:2011
Edition 3.0 (2011-06-30)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD46:2011
Edition 3.0 (2011-06-30)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD47:2011
Edition 3.0 (2011-11-28)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD48:2012
Edition 3.0 (2012-09-27)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD49:2013
Edition 3.0 (2013-02-26)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD50:2014
Edition 3.0 (2014-02-19)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD51:2014
Edition 3.0 (2014-12-11)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD52:2015
Edition 3.0 (2015-07-24)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD53:2015
Edition 3.0 (2015-08-21)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD54:2016
Edition 3.0 (2016-05-30)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD55:2016
Edition 3.0 (2016-12-16)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017
Edition 3.0 (2017-05-16)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017/COR1:2017
Edition 3.0 (2017-11-14)
Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD57:2017
Edition 3.0 (2017-12-15)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018
Edition 3.0 (2018-08-23)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018/COR1:2019
Edition 3.0 (2019-03-12)
Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD59:2019
Edition 3.0 (2019-07-08)
Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD60:2020
Edition 3.0 (2020-03-31)
Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD61:2020
Edition 3.0 (2020-11-27)
Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2:1969/AMD18:1998
Edition 3.0 (1998-03-16)
Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD19:1999
Edition 3.0 (1999-02-23)
Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD20:1999
Edition 3.0 (1999-07-29)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD21:2000
Edition 3.0 (2000-05-26)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD22:2001
Edition 3.0 (2001-02-13)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD23:2001
Edition 3.0 (2001-02-13)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD24:2001
Edition 3.0 (2001-10-26)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD25:2002
Edition 3.0 (2002-05-03)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD26:2002
Edition 3.0 (2002-05-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD27:2002
Edition 3.0 (2002-10-29)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD28:2003
Edition 3.0 (2003-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD29:2003
Edition 3.0 (2003-09-03)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD30:2003
Edition 3.0 (2003-10-30)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD31:2004
Edition 3.0 (2004-07-26)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD32:2004
Edition 3.0 (2004-11-25)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD33:2005
Edition 3.0 (2005-10-03)
Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD34:2006
Edition 3.0 (2006-05-30)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD35:2006
Edition 3.0 (2006-12-14)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD36:2007
Edition 3.0 (2007-04-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD37:2008
Edition 3.0 (2008-07-18)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD38:2009
Edition 3.0 (2009-04-29)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD39:2009
Edition 3.0 (2009-07-24)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD40:2010
Edition 3.0 (2010-02-22)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD41:2010
Edition 3.0 (2010-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD42:2011
Edition 3.0 (2011-06-30)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD44:2011
Edition 3.0 (2011-11-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD45:2012
Edition 3.0 (2012-09-27)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD46:2013
Edition 3.0 (2013-02-26)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD47:2014
Edition 3.0 (2014-02-19)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD48:2014
Edition 3.0 (2014-12-11)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD49:2015
Edition 3.0 (2015-07-24)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD50:2015
Edition 3.0 (2015-08-21)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD51:2016
Edition 3.0 (2016-05-30)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD52:2017
Edition 3.0 (2017-05-16)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD53:2017
Edition 3.0 (2017-12-15)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD54:2018
Edition 3.0 (2018-08-23)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD55:2020
Edition 3.0 (2020-03-31)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD56:2020
Edition 3.0 (2020-05-13)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD57:2020
Edition 3.0 (2020-11-27)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR, RU

TC 34/SC 34B

IEC 60061-3:1969/AMD20:1998
Edition 3.0 (1998-03-16)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD21:1999
Edition 3.0 (1999-02-23)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD22:1999
Edition 3.0 (1999-07-29)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD23:2000
Edition 3.0 (2000-05-18)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD24:2001
Edition 3.0 (2001-02-13)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD26:2001
Edition 3.0 (2001-10-26)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD27:2002
Edition 3.0 (2002-05-03)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD28:2002
Edition 3.0 (2002-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD29:2002
Edition 3.0 (2002-10-31)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD30:2003
Edition 3.0 (2003-05-15)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD31:2003
Edition 3.0 (2003-09-03)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD32:2003
Edition 3.0 (2003-10-30)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD33:2004
Edition 3.0 (2004-07-26)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD34:2004
Edition 3.0 (2004-11-25)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD35:2005
Edition 3.0 (2005-10-03)
Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD36:2006
Edition 3.0 (2006-05-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD37:2006
Edition 3.0 (2006-12-14)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD38:2007
Edition 3.0 (2007-04-30)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD39:2009
Edition 3.0 (2009-04-29)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD40:2009
Edition 3.0 (2009-07-24)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD41:2010
Edition 3.0 (2010-02-22)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD42:2010
Edition 3.0 (2010-04-29)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD44:2011
Edition 3.0 (2011-07-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD45:2011
Edition 3.0 (2011-11-28)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD46:2012
Edition 3.0 (2012-09-27)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD47:2013
Edition 3.0 (2013-02-26)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD48:2014
Edition 3.0 (2014-02-19)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD49:2014
Edition 3.0 (2014-12-11)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD50:2015
Edition 3.0 (2015-07-24)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD51:2015
Edition 3.0 (2015-08-21)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD52:2016
Edition 3.0 (2016-05-30)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD53:2017
Edition 3.0 (2017-05-16)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD54:2017
Edition 3.0 (2017-12-15)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD55:2018
Edition 3.0 (2018-08-23)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD56:2019
Edition 3.0 (2019-07-08)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD57:2020
Edition 3.0 (2020-03-31)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD58:2020
Edition 3.0 (2020-05-13)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4:2005 CSV
Edition 1.9 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990
Edition 1.0 (1990-02-28)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD5:1998
Edition 1.0 (1998-03-16)
Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD6:2000
Edition 1.0 (2000-05-18)
Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD7:2001
Edition 1.0 (2001-10-26)
Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD8:2003
Edition 1.0 (2003-05-13)
Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD9:2004
Edition 1.0 (2004-11-25)
Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD10:2006
Edition 1.0 (2006-05-30)
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD11:2007
Edition 1.0 (2007-10-16)
Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD12:2009
Edition 1.0 (2009-07-24)
Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD13:2010
Edition 1.0 (2010-08-31)
Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD14:2011
Edition 1.0 (2011-08-26)
Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD15:2017
Edition 1.0 (2017-05-16)
Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD16:2018
Edition 1.0 (2018-03-22)
Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-1A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1D:1972
Edition 3.0 (1972-01-01)
supplement 4 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1E:1972
Edition 3.0 (1972-01-01)
Supplement 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1F:1975
Edition 3.0 (1975-01-01)
Supplement 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1H:1977
Edition 3.0 (1977-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1J:1980
Edition 3.0 (1980-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR, RU

TC 34/SC 34B

IEC 60061-1K:1983
Edition 3.0 (1983-01-01)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1L:1987
Edition 3.0 (1987-01-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1M:1989
Edition 3.0 (1989-01-01)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1N:1992
Edition 3.0 (1992-04-30)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1P:1994
Edition 3.0 (1994-03-01)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1Q:1994
Edition 3.0 (1994-11-23)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1R:1995
Edition 3.0 (1995-11-08)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1S:1996
Edition 3.0 (1996-02-01)
seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1T:1996
Edition 3.0 (1996-07-01)
eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1U:1996
Edition 3.0 (1996-10-01)
nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1V:1997
Edition 3.0 (1997-05-23)
Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2A:1970
Edition 3.0 (1970-01-01)
first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2B:1971
Edition 3.0 (1971-01-01)
second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2C:1972
Edition 3.0 (1972-01-01)
third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2D:1975
Edition 3.0 (1975-01-01)
fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2E:1977
Edition 3.0 (1977-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2F:1980
Edition 3.0 (1980-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2G:1983
Edition 3.0 (1983-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2H:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2J:1989
Edition 3.0 (1989-12-31)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2K:1992
Edition 3.0 (1992-04-15)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2L:1994
Edition 3.0 (1994-03-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2M:1994
Edition 3.0 (1994-11-23)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2N:1995
Edition 3.0 (1995-11-08)
Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2P:1996
Edition 3.0 (1996-02-01)
Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2Q:1996
Edition 3.0 (1996-07-01)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2R:1996
Edition 3.0 (1996-10-01)
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2S:1997
Edition 3.0 (1997-05-23)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3D:1972
Edition 3.0 (1972-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3E:1972
Edition 3.0 (1972-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3F:1975
Edition 3.0 (1975-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3H:1980
Edition 3.0 (1980-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3J:1983
Edition 3.0 (1983-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3K:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3L:1989
Edition 3.0 (1989-12-15)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3M:1992
Edition 3.0 (1992-04-30)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3N:1994
Edition 3.0 (1994-03-01)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3P:1994
Edition 3.0 (1994-11-23)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3Q:1995
Edition 3.0 (1995-11-08)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3R:1996
Edition 3.0 (1996-02-01)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3S:1996
Edition 3.0 (1996-07-01)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3T:1996
Edition 3.0 (1996-10-01)
Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3U:1997
Edition 3.0 (1997-05-23)
Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4A:1992
Edition 1.0 (1992-04-30)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4B:1994
Edition 1.0 (1994-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4C:1994
Edition 1.0 (1994-11-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4D:1995
Edition 1.0 (1995-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV
Edition 6.3 (2005-05-24)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, EN, FR

TC 34/SC 34A

IEC 60064:1993
Edition 6.0 (1993-12-17)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD1:2000
Edition 6.0 (2000-11-28)
Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD2:2002
Edition 6.0 (2002-11-29)
Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD3:2005
Edition 6.0 (2005-03-17)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD4:2007
Edition 6.0 (2007-02-16)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD5:2009
Edition 6.0 (2009-07-30)
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60068-2-42:2003
Edition 3.0 (2003-05-22)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-43:2003
Edition 2.0 (2003-05-23)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-46:1982
Edition 1.0 (1982-01-01)
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60068-2-49:1983
Edition 1.0 (1983-01-01)
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60072-1:1991
Edition 6.0 (1991-02-01)
Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

EN-FR

TC 2

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

EN-FR

TC 2

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

EN-FR

TC 2

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

EN-FR

TC 31/SC 31J

IEC 60079-10-2:2015
Edition 2.0 (2015-01-16)
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-14:2013
Edition 5.0 (2013-11-28)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR, ES

TC 31/SC 31J

IEC 60079-14:2013/ISH1:2017
Edition 5.0 (2017-02-13)
Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-14:2013/ISH2:2020
Edition 5.0 (2020-03-13)
Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN

TC 31/SC 31J

IEC 60079-14:2013/COR1:2016
Edition 5.0 (2016-01-28)
Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-17:2013
Edition 5.0 (2013-11-19)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

EN-FR, ES

TC 31/SC 31J

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

EN-FR, ES

TC 31/SC 31J

IEC 60081:1997+AMD1:2000 CSV
Edition 5.1 (2002-05-29)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997
Edition 5.0 (1997-12-15)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD1:2000
Edition 5.0 (2000-01-27)
Amendment 1 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD2:2003
Edition 5.0 (2003-03-04)
Amendment 2 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD3:2005
Edition 5.0 (2005-09-27)
Amendment 3 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD4:2010
Edition 5.0 (2010-02-18)
Amendment 4 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD5:2013
Edition 5.0 (2013-07-19)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD6:2017
Edition 5.0 (2017-08-25)
Amendment 6 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60130-1:1988
Edition 2.0 (1988-11-10)
Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

EN-FR, RU

TC 48/SC 48B

IEC 60130-5:1966
Edition 1.0 (1966-01-01)
Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

EN-FR, RU

TC 48/SC 48B

IEC 60130-9:2011
Edition 4.0 (2011-02-23)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

EN-FR

TC 48/SC 48B

IEC 60130-10:1971
Edition 1.0 (1971-01-01)
Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

EN-FR, RU

TC 48/SC 48B

IEC 60130-12:1976
Edition 2.0 (1976-01-01)
Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

EN-FR, RU

TC 48/SC 48B

IEC 60130-17:1998
Edition 1.0 (1998-02-12)
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

EN-FR

TC 48/SC 48B

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60137:2017
Edition 7.0 (2017-06-22)
Insulated bushings for alternating voltages above 1000 V

EN-FR, ES

TC 36/SC 36A

IEC 60137:2017/COR1:2018
Edition 7.0 (2018-05-07)
Corrigendum 1 - Insulated bushings for alternating voltages above 1 000 V

EN-FR

TC 36/SC 36A

IEC 60155:1993
Edition 4.0 (1993-11-30)
Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD1:1995
Edition 4.0 (1995-10-17)
Amendment 1 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD2:2006
Edition 4.0 (2006-11-27)
Amendment 2 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60168:1994+AMD1:1997+AMD2:2000 CSV
Edition 4.2 (2001-04-19)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR

TC 36

IEC 60168:1994
Edition 4.0 (1994-11-16)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD1:1997
Edition 4.0 (1997-06-24)
Amendment 1 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD2:2000
Edition 4.0 (2000-10-18)
Amendment 2 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60188:2001
Edition 3.0 (2001-05-30)
High-pressure mercury vapour lamps - Performance specifications

EN-FR, ES

TC 34/SC 34A

IEC 60192:2001
Edition 3.0 (2001-05-22)
Low-pressure sodium vapour lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60193:2019
Edition 3.0 (2019-04-25)
Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests

EN-FR

TC 4

IEC 60215:2016
Edition 4.0 (2016-04-27)
Safety requirements for radio transmitting equipment - General requirements and terminology

EN-FR, EN

TC 103

IEC 60238:2016
Edition 9.0 (2016-07-14)
Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017
Edition 9.0 (2017-01-30)
Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017/COR1:2018
Edition 9.0 (2018-01-30)
Corrigendum 1 - Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD2:2020
Edition 9.0 (2020-01-20)
Amendment 2 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60240-1:1992
Edition 2.0 (1992-07-31)
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

EN-FR

TC 34/SC 34A

IEC 60244-6:1976
Edition 1.0 (1976-01-01)
Methods of measurement for radio transmitters. Part 6: Cabinet radiation at frequencies between 130 kHz and 1 GHz

EN-FR, RU

TC 103

IEC 60244-7:1979
Edition 1.0 (1979-01-01)
Methods of measurement for radio transmitters. Part 7: Cabinet radiation at frequencies above 1 GHz

EN-FR, RU

TC 103

IEC 60244-7A:1980
Edition 1.0 (1980-01-01)
Supplement A - Methods of measurement for radio transmitters - Part 7: Cabinet radiation at frequencies above 1 GHz - Medium-sized transmitters - Large transmitters

EN-FR, RU

TC 103

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

EN-FR

TC 2

IEC 60299:2014
Edition 3.0 (2014-07-10)
Household electric blankets - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60308:2005
Edition 2.0 (2005-01-28)
Hydraulic turbines - Testing of control systems

EN-FR, ES

TC 4

IEC 60335-2-40:2018
Edition 6.0 (2018-01-26)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

EN-FR, EN

TC 61/SC 61D

IEC 60335-2-89:2019
Edition 3.0 (2019-06-20)
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor

EN-FR

TC 61/SC 61C

IEC 60335-2-89:2019/COR1:2019
Edition 3.0 (2019-09-24)
Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor

EN-FR

TC 61/SC 61C

IEC 60335-2-89:2019/COR2:2021
Edition 3.0 (2021-08-30)
Corrigendum 2 - Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor

EN-FR

TC 61/SC 61C

IEC 60335-2-104:2021
Edition 2.0 (2021-05-07)
Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

EN

TC 61/SC 61D

IEC 60352-1:1997
Edition 3.0 (1997-08-06)
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR, ES

TC 48/SC 48B

IEC 60352-1:1997/COR1:1998
Edition 3.0 (1998-10-07)
Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-2:2006
Edition 2.0 (2006-02-23)
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-2:2006/AMD1:2013
Edition 2.0 (2013-06-27)
Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-3:2020
Edition 2.0 (2020-04-09)
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-4:2020
Edition 2.0 (2020-06-11)
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60352-5:2020
Edition 5.0 (2020-07-22)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

EN-FR, EN

TC 48/SC 48B

IEC 60352-6:1997
Edition 1.0 (1997-08-26)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

EN-FR, ES

TC 48/SC 48B

IEC 60352-8:2011
Edition 1.0 (2011-02-10)
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

EN-FR

TC 48/SC 48B

IEC 60356:1971
Edition 1.0 (1971-01-01)
Dimensions for commutators and slip-rings

EN-FR

TC 2

IEC 60357:2002
Edition 3.0 (2002-11-15)
Tungsten halogen lamps (non vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD1:2006
Edition 3.0 (2006-04-11)
Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD2:2008
Edition 3.0 (2008-10-08)
Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60357:2002/AMD3:2011
Edition 3.0 (2011-01-27)
Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60360:1998
Edition 3.0 (1998-06-10)
Standard method of measurement of lamp cap temperature rise

EN-FR, ES

TC 34/SC 34A

IEC 60360:1998/COR1:1999
Edition 3.0 (1999-03-16)
Corrigendum 1 - Standard method of measurement of lamp cap temperature rise

EN-FR

TC 34/SC 34A

IEC 60364-7-705:2006
Edition 2.0 (2006-07-10)
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

EN-FR, EN, FR

TC 64

IEC 60364-7-712:2017
Edition 2.0 (2017-04-10)
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

EN-FR

TC 64

IEC 60364-7-715:2011
Edition 2.0 (2011-12-14)
Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations

EN-FR

TC 64

IEC 60370:2017
Edition 2.0 (2017-12-13)
Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods

EN-FR

TC 15

IEC 60371-1:2003
Edition 3.0 (2003-04-09)
Specification for insulating materials based on mica - Part 1: Definitions and general requirements

EN-FR, ES

TC 15

IEC 60371-2:2004
Edition 3.0 (2004-06-23)
Specification for insulating materials based on mica - Part 2: Methods of test

EN-FR

TC 15

IEC 60371-3-1:2006
Edition 3.0 (2006-06-13)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials

EN-FR, EN, ES

TC 15

IEC 60371-3-2:2005
Edition 2.0 (2005-10-24)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper

EN-FR, EN

TC 15

IEC 60371-3-3:1983
Edition 1.0 (1983-01-01)
Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment

EN-FR, ES

TC 15

IEC 60371-3-4:1992
Edition 1.0 (1992-11-20)
Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

EN-FR, ES

TC 15

IEC 60371-3-4:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

EN-FR, EN

TC 15

IEC 60371-3-5:2005
Edition 2.0 (2005-11-21)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)

EN-FR, EN

TC 15

IEC 60371-3-6:1992
Edition 1.0 (1992-11-30)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

EN-FR, ES

TC 15

IEC 60371-3-6:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

EN-FR, EN

TC 15

IEC 60371-3-7:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

EN-FR, ES

TC 15

IEC 60371-3-7:1995/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

EN-FR, EN

TC 15

IEC 60371-3-8:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables

EN-FR, ES

TC 15

IEC 60371-3-8:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables

EN-FR, EN, ES

TC 15

IEC 60371-3-9:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

EN-FR, ES

TC 15

IEC 60371-3-9:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

EN-FR, EN, ES

TC 15

IEC 60379:1987
Edition 3.0 (1987-09-30)
Methods for measuring the performance of electric storage water-heaters for household purposes

EN-FR, ES

TC 59/SC 59C

IEC 60383-1:1993
Edition 4.0 (1993-04-26)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

EN-FR, EN, FR, ES

TC 36

IEC 60383-2:1993
Edition 1.0 (1993-04-20)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

EN-FR, EN, FR, ES

TC 36

IEC 60394-1:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 1: Definitions and general requirements

EN-FR, RU

TC 15

IEC 60394-2:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 2: Methods of test

EN-FR

TC 15

IEC 60394-3-1:1976
Edition 1.0 (1976-01-01)
Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C

EN-FR, RU

TC 15

IEC 60394-3-2:1988
Edition 1.0 (1988-03-30)
Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish

EN-FR

TC 15

IEC 60398:2015
Edition 3.0 (2015-04-09)
Installations for electroheating and electromagnetic processing - General performance test methods

EN-FR

TC 27

IEC 60399:2004+AMD1:2008 CSV
Edition 2.1 (2008-10-21)
Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60399:2004
Edition 2.0 (2004-10-07)
Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60399:2004/AMD1:2008
Edition 2.0 (2008-07-08)
Amendment 1 - Barrel thread for lampholders with shade holder ring

EN-FR

TC 34/SC 34B

IEC 60400:2017
Edition 8.0 (2017-06-15)
Lampholders for tubular fluorescent lamps and starterholders

EN-FR, EN

TC 34/SC 34B

IEC 60400:2017/AMD1:2020
Edition 8.0 (2020-02-25)
Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders

EN-FR

TC 34/SC 34B

IEC 60413:1972
Edition 1.0 (1972-01-01)
Test procedures for determining physical properties of brush materials for electrical machines

EN-FR, RU

TC 2

IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV
Edition 2.2 (2012-02-10)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR

TC 34/SC 34A

IEC 60432-1:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, EN, FR

TC 34/SC 34A

IEC 60432-1:1999
Edition 2.0 (1999-08-13)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-1:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-1:1999/AMD2:2011
Edition 2.0 (2011-12-07)
Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV
Edition 2.2 (2012-05-15)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR

TC 34/SC 34A

IEC 60432-2:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

EN-FR, EN, FR

TC 34/SC 34A

IEC 60432-2:1999
Edition 2.0 (1999-10-13)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-2:1999/AMD2:2012
Edition 2.0 (2012-03-22)
Amendment 2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

EN-FR, ES

TC 34/SC 34A

IEC 60432-3:2012
Edition 2.0 (2012-07-04)
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

EN-FR, ES

TC 34/SC 34A

IEC 60434:1973
Edition 1.0 (1973-01-01)
Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60434:1973/AMD1:1981
Edition 1.0 (1981-08-01)
Amendment 1 - Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60434:1973/AMD2:1984
Edition 1.0 (1984-01-01)
Amendment 2 - Aircraft electrical filament lamps

EN-FR

TC 34/SC 34A

IEC 60454-1:1992
Edition 2.0 (1992-05-31)
Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements

EN-FR, ES

TC 15

IEC 60454-2:2007
Edition 3.0 (2007-06-21)
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

EN-FR, EN

TC 15

IEC 60454-2:2007/COR1:2009
Edition 3.0 (2009-12-17)
Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

EN

TC 15

IEC 60454-3-1:1998+AMD1:2001 CSV
Edition 2.1 (2002-12-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

EN-FR

TC 15

IEC 60454-3-1:1998
Edition 2.0 (1998-02-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

EN-FR, ES

TC 15

IEC 60454-3-1:1998/AMD1:2001
Edition 2.0 (2001-05-28)
Amendment 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

EN-FR, ES

TC 15

IEC 60454-3-2:2006
Edition 3.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives

EN-FR, EN, ES

TC 15

IEC 60454-3-4:2007
Edition 3.0 (2007-06-05)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

EN-FR, EN, ES

TC 15

IEC 60454-3-7:1998
Edition 2.0 (1998-03-16)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive

EN-FR, ES

TC 15

IEC 60454-3-8:2006
Edition 3.0 (2006-02-13)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre

EN-FR, EN

TC 15

IEC 60454-3-11:2007
Edition 2.0 (2007-05-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive

EN-FR, EN

TC 15

IEC 60454-3-12:2006
Edition 2.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive

EN-FR, EN, ES

TC 15

IEC 60454-3-14:2001
Edition 1.0 (2001-07-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive

EN-FR, ES

TC 15

IEC 60454-3-19:2003
Edition 1.0 (2003-05-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

EN-FR, ES

TC 15

IEC 60455-1:1998
Edition 2.0 (1998-08-25)
Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements

EN-FR, ES

TC 15

IEC 60455-2:2015
Edition 3.0 (2015-06-25)
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test

EN-FR, EN

TC 15

IEC 60455-2-2:1984
Edition 1.0 (1984-01-01)
Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2-2: Methods of test - Test methods for coating powders for electrical purposes

EN-FR, RU

TC 15

IEC 60455-3-2:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds

EN-FR, ES

TC 15

IEC 60455-3-3:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds

EN-FR, ES

TC 15

IEC 60455-3-4:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds

EN-FR, ES

TC 15

IEC 60455-3-5:2006
Edition 3.0 (2006-03-08)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

EN-FR

TC 15

IEC 60455-3-8:2021
Edition 2.0 (2021-06-16)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories

EN-FR

TC 15

IEC 60455-3-11:1988
Edition 1.0 (1988-04-15)
Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders

EN-FR

TC 15

IEC 60464-1:1998
Edition 2.0 (1998-11-16)
Varnishes used for electrical insulation - Part 1: Definitions and general requirements

EN-FR, ES

TC 15

IEC 60464-1:1998/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements

EN-FR, EN, ES

TC 15

IEC 60464-2:2001
Edition 2.0 (2001-07-31)
Varnishes used for electrical insulation - Part 2: Methods of test

EN-FR, ES

TC 15

IEC 60464-2:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test

EN-FR, EN, ES

TC 15

IEC 60464-3-1:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

EN-FR, ES

TC 15

IEC 60464-3-1:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

EN-FR, EN, ES

TC 15

IEC 60464-3-2:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

EN-FR, ES

TC 15

IEC 60464-3-2:2001/AMD1:2006
Edition 2.0 (2006-04-27)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

EN-FR, EN, ES

TC 15

IEC 60507:2013
Edition 3.0 (2013-12-13)
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

EN-FR, ES

TC 36

IEC 60507:2013/COR1:2018
Edition 3.0 (2018-08-29)
Corrigendum 1 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

EN-FR

TC 36

IEC 60512-1:2018
Edition 5.0 (2018-10-22)
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

EN-FR

TC 48/SC 48B

IEC 60512-1-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-4:1997
Edition 1.0 (1997-07-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-4:1997/COR1:2000
Edition 1.0 (2000-11-15)
Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR

TC 48/SC 48B

IEC 60512-1-100:2012
Edition 3.0 (2012-02-22)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

EN-FR, ES

TC 48/SC 48B

IEC 60512-1-101:2015
Edition 1.0 (2015-05-05)
Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification

EN-FR

TC 48/SC 48B

IEC 60512-2-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-2:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-5:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

EN-FR, ES

TC 48/SC 48B

IEC 60512-2-6:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

EN-FR, ES

TC 48/SC 48B

IEC 60512-3-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-1:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

EN-FR, ES

TC 48/SC 48B

IEC 60512-4-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

EN-FR, ES

TC 48/SC 48B

IEC 60512-5-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

EN-FR, ES

TC 48/SC 48B

IEC 60512-5-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

EN-FR, ES

TC 48/SC 48B

IEC 60512-6-5:1997
Edition 1.0 (1997-10-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

EN-FR, ES

TC 48/SC 48B

IEC 60512-7-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

EN-FR

TC 48/SC 48B

IEC 60512-7-2:2011
Edition 1.0 (2011-11-17)
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

EN-FR

TC 48/SC 48B

IEC 60512-8-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

EN-FR

TC 48/SC 48B

IEC 60512-8-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

EN-FR

TC 48/SC 48B

IEC 60512-8-3:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

EN-FR

TC 48/SC 48B

IEC 60512-9-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

EN-FR

TC 48/SC 48B

IEC 60512-9-2:2011
Edition 1.0 (2011-11-28)
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

EN-FR

TC 48/SC 48B

IEC 60512-9-3:2011
Edition 2.0 (2011-06-22)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

EN-FR

TC 48/SC 48B

IEC 60512-9-4:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

EN-FR

TC 48/SC 48B

IEC 60512-9-5:2020
Edition 2.0 (2020-06-09)
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

EN-FR

TC 48/SC 48B

IEC 60512-10-4:2003
Edition 2.0 (2003-08-11)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-1:2019
Edition 2.0 (2019-05-16)
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

EN-FR

TC 48/SC 48B

IEC 60512-11-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-5:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-6:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-7:2003
Edition 2.0 (2003-05-22)
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-9:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-10:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-11:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-12:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-13:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

EN-FR, ES

TC 48/SC 48B

IEC 60512-11-14:2003
Edition 2.0 (2003-07-24)
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

EN-FR, EN, ES

TC 48/SC 48B

IEC 60512-12-1:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-3:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-4:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-6:1996
Edition 1.0 (1996-01-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

EN-FR, ES

TC 48/SC 48B

IEC 60512-12-7:2001
Edition 1.0 (2001-01-24)
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-1:2006
Edition 2.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

EN-FR, ES

TC 48/SC 48B

IEC 60512-13-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-2:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-4:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-5:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-6:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

EN-FR, ES

TC 48/SC 48B

IEC 60512-14-7:1997
Edition 1.0 (1997-10-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

EN-FR, ES

TC 48/SC 48B

IEC 60512-15-1:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

EN-FR

TC 48/SC 48B

IEC 60512-15-2:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

EN-FR

TC 48/SC 48B

IEC 60512-15-3:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

EN-FR

TC 48/SC 48B

IEC 60512-15-4:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

EN-FR

TC 48/SC 48B

IEC 60512-15-5:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

EN-FR

TC 48/SC 48B

IEC 60512-15-6:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

EN-FR

TC 48/SC 48B

IEC 60512-15-7:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

EN-FR

TC 48/SC 48B

IEC 60512-15-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

EN-FR, ES

TC 48/SC 48B

IEC 60512-16-1:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

EN-FR

TC 48/SC 48B

IEC 60512-16-2:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

EN-FR

TC 48/SC 48B

IEC 60512-16-3:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

EN-FR

TC 48/SC 48B

IEC 60512-16-4:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

EN-FR

TC 48/SC 48B

IEC 60512-16-5:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

EN-FR

TC 48/SC 48B

IEC 60512-16-6:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

EN-FR

TC 48/SC 48B

IEC 60512-16-7:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

EN-FR

TC 48/SC 48B

IEC 60512-16-8:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

EN-FR

TC 48/SC 48B

IEC 60512-16-9:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

EN-FR

TC 48/SC 48B

IEC 60512-16-11:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

EN-FR

TC 48/SC 48B

IEC 60512-16-13:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

EN-FR

TC 48/SC 48B

IEC 60512-16-14:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-16:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-17:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

EN-FR

TC 48/SC 48B

IEC 60512-16-18:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

EN-FR

TC 48/SC 48B

IEC 60512-16-20:1996
Edition 1.0 (1996-07-31)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

EN-FR, ES

TC 48/SC 48B

IEC 60512-16-21:2012
Edition 1.0 (2012-05-07)
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

EN-FR

TC 48/SC 48B

IEC 60512-17-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

EN-FR

TC 48/SC 48B

IEC 60512-17-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

EN-FR

TC 48/SC 48B

IEC 60512-17-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

EN-FR

TC 48/SC 48B

IEC 60512-17-4:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

EN-FR

TC 48/SC 48B

IEC 60512-19-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

EN-FR

TC 48/SC 48B

IEC 60512-19-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

EN-FR, ES

TC 48/SC 48B

IEC 60512-20-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

EN-FR

TC 48/SC 48B

IEC 60512-20-2:2000
Edition 1.0 (2000-04-13)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

EN-FR, ES

TC 48/SC 48B

IEC 60512-20-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

EN-FR

TC 48/SC 48B

IEC 60512-21-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

EN-FR

TC 48/SC 48B

IEC 60512-22-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

EN-FR

TC 48/SC 48B

IEC 60512-23-2:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

EN-FR

TC 48/SC 48B

IEC 60512-23-3:2018
Edition 2.0 (2018-12-14)
Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

EN-FR

TC 48/SC 48B

IEC 60512-23-4:2001
Edition 1.0 (2001-06-19)
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

EN-FR, ES

TC 48/SC 48B

IEC 60512-23-7:2005
Edition 1.0 (2005-01-27)
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

EN-FR, ES

TC 48/SC 48B

IEC 60512-24-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

EN-FR

TC 48/SC 48B

IEC 60512-25-1:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-2:2002
Edition 1.0 (2002-03-12)
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-3:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-4:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-5:2004
Edition 1.0 (2004-07-15)
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-6:2004
Edition 1.0 (2004-05-26)
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-7:2004
Edition 1.0 (2004-12-15)
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

EN-FR, ES

TC 48/SC 48B

IEC 60512-25-9:2008
Edition 1.0 (2008-08-28)
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008+AMD1:2011 CSV
Edition 1.1 (2011-05-25)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-26-100:2008/AMD1:2011
Edition 1.0 (2011-03-14)
Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR

TC 48/SC 48B

IEC 60512-27-100:2011
Edition 1.0 (2011-12-07)
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

EN-FR

TC 48/SC 48B

IEC PAS 60512-27-200:2018
Edition 1.0 (2018-10-19)
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

EN

TC 48/SC 48B

IEC 60512-28-100:2019
Edition 2.0 (2019-11-15)
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

EN-FR

TC 48/SC 48B

IEC 60512-29-100:2015
Edition 1.0 (2015-03-05)
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

EN-FR

TC 48/SC 48B

IEC 60512-99-001:2012
Edition 1.0 (2012-08-13)
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

EN-FR

TC 48/SC 48B

IEC 60512-99-002:2019
Edition 1.0 (2019-03-08)
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

EN-FR

TC 48/SC 48B

IEC TR 60513:1994
Edition 2.0 (1994-01-08)
Fundamental aspects of safety standards for medical electrical equipment

EN-FR

TC 62/SC 62A

IEC 60519-1:2020
Edition 6.0 (2020-03-11)
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

EN-FR

TC 27

IEC 60519-12:2016
Edition 2.0 (2016-12-15)
Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating

EN-FR

TC 27

IEC 60531:1999
Edition 2.0 (1999-01-07)
Household electric thermal storage room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60545:2021
Edition 2.0 (2021-06-23)
Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps

EN-FR

TC 4

IEC 60554-1:1977
Edition 1.0 (1977-01-01)
Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

EN-FR, RU

TC 15

IEC 60554-1:1977/AMD1:1983
Edition 1.0 (1983-01-01)
Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

EN-FR

TC 15

IEC 60554-2:2001
Edition 2.0 (2001-11-08)
Cellulosic papers for electrical purposes - Part 2: Methods of test

EN-FR, ES

TC 15

IEC 60554-3-1:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper

EN-FR, RU

TC 15

IEC 60554-3-2:1983
Edition 1.0 (1983-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper

EN-FR

TC 15

IEC 60554-3-3:1980
Edition 1.0 (1980-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper

EN-FR

TC 15

IEC 60554-3-4:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper

EN-FR, RU

TC 15

IEC 60554-3-5:1984
Edition 1.0 (1984-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers

EN-FR

TC 15

IEC 60560:1977
Edition 1.0 (1977-01-01)
Definitions and terminology of brush-holders for electrical machines

EN-FR, RU

TC 2

IEC 60570:2003
Edition 4.0 (2003-01-30)
Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60570:2003/AMD1:2017
Edition 4.0 (2017-04-05)
Amendment 1 - Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60570:2003/AMD2:2019
Edition 4.0 (2019-12-11)
Amendment 2 - Electrical supply track systems for luminaires

EN-FR, ES

TC 34/SC 34D

IEC TR 60575:1977
Edition 1.0 (1977-01-01)
Thermal-mechanical performance test and mechanical performance test on string insulator units

EN-FR

TC 36

IEC 60598-1:2020
Edition 9.0 (2020-08-17)
Luminaires - Part 1: General requirements and tests

EN-FR, EN

TC 34/SC 34D

IEC 60598-2-1:2020
Edition 2.0 (2020-01-28)
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires

EN-FR

TC 34/SC 34D

IEC 60598-2-2:2011
Edition 3.0 (2011-11-08)
Luminaires - Part 2-2: Particular requirements - Recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-3:2002+AMD1:2011 CSV
Edition 3.1 (2011-11-17)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR

TC 34/SC 34D

IEC 60598-2-3:2002
Edition 3.0 (2002-12-04)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR, EN, FR, ES

TC 34/SC 34D

IEC 60598-2-3:2002/AMD1:2011
Edition 3.0 (2011-04-14)
Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-4:2017
Edition 3.0 (2017-04-21)
Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires

EN-FR, EN, ES

TC 34/SC 34D

IEC 60598-2-5:2015
Edition 3.0 (2015-08-06)
Luminaires - Part 2-5: Particular requirements - Floodlights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-8:2013
Edition 3.0 (2013-04-29)
Luminaires - Part 2-8: Particular requirements - Handlamps

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-10:2003
Edition 2.0 (2003-05-19)
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-11:2013
Edition 2.0 (2013-05-16)
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-12:2013
Edition 2.0 (2013-04-29)
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006+AMD1:2011 CSV
Edition 1.1 (2012-02-10)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR

TC 34/SC 34D

IEC 60598-2-13:2006
Edition 1.0 (2006-06-13)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006/AMD1:2011
Edition 1.0 (2011-12-07)
Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-13:2006/AMD2:2016
Edition 1.0 (2016-05-25)
Amendment 2 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-14:2009
Edition 1.0 (2009-02-05)
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-17:2017
Edition 2.0 (2017-05-30)
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)

EN-FR

TC 34/SC 34D

IEC 60598-2-18:1993
Edition 2.0 (1993-04-26)
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-18:1993/COR1:2013
Edition 2.0 (2013-03-21)
Corrigendum 1 - Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

EN-FR

TC 34/SC 34D

IEC 60598-2-18:1993/AMD1:2011
Edition 2.0 (2011-12-14)
Amendment 1 - Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-19:1981
Edition 1.0 (1981-01-01)
Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-19:1981/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-19:1981/AMD2:1997
Edition 1.0 (1997-12-11)
Amendment 2 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

EN-FR

TC 34/SC 34D

IEC 60598-2-20:2014
Edition 4.0 (2014-11-25)
Luminaires - Part 2-20: Particular requirements - Lighting chains

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-20:2014/COR1:2016
Edition 4.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-20: Particular requirements - Lighting chains

EN-FR

TC 34/SC 34D

IEC 60598-2-21:2014
Edition 1.0 (2014-11-25)
Luminaires - Part 2-21: Particular requirements - Rope lights

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-21:2014/COR1:2016
Edition 1.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-21: Particular requirements - Rope lights

EN-FR

TC 34/SC 34D

IEC 60598-2-22:2021
Edition 5.0 (2021-12-06)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

EN-FR

TC 34/SC 34D

IEC 60598-2-23:2020
Edition 2.0 (2020-07-20)
Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources

EN-FR

TC 34/SC 34D

IEC 60598-2-24:2013
Edition 2.0 (2013-06-19)
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-25:1994
Edition 1.0 (1994-08-17)
Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

EN-FR, ES

TC 34/SC 34D

IEC 60598-2-25:1994/AMD1:2004
Edition 1.0 (2004-09-28)
Amendment 1 - Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings

EN-FR

TC 34/SC 34D

IEC 60601-1:2005
Edition 3.0 (2005-12-15)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR, ES

TC 62/SC 62A

IEC 60601-1:2005/ISH1:2008
Edition 3.0 (2008-04-25)
Interpretation sheet 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/ISH2:2009
Edition 3.0 (2009-01-28)
Interpretation sheet 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/ISH3:2013
Edition 3.0 (2013-05-22)
Interpretation sheet 3 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/COR1:2006
Edition 3.0 (2006-12-12)
Corrigendum 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/COR2:2007
Edition 3.0 (2007-12-07)
Corrigendum 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/AMD1:2012
Edition 3.0 (2012-07-13)
Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/AMD1:2012/ISH1:2021
Edition 3.0 (2021-03-12)
Interpretation Sheet 1 - Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN

TC 62/SC 62A

IEC 60601-1:2005/AMD1:2012/COR1:2014
Edition 3.0 (2014-07-22)
Corrigendum 1 - Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR

TC 62/SC 62A

IEC 60601-1:2005/AMD2:2020
Edition 3.0 (2020-08-20)
Amendment 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

EN-FR, EN

TC 62/SC 62A

IEC 60601-1-2:2014
Edition 4.0 (2014-02-25)
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

EN-FR

TC 62/SC 62A

IEC 60601-1-2:2014/AMD1:2020
Edition 4.0 (2020-09-01)
Amendment 1 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

EN-FR, EN

TC 62/SC 62A

IEC 60601-1-6:2010
Edition 3.0 (2010-01-27)
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-6:2010/AMD1:2013
Edition 3.0 (2013-10-29)
Amendment 1 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-6:2010/AMD2:2020
Edition 3.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

EN-FR

TC 62/SC 62A

IEC 60601-1-8:2006
Edition 2.0 (2006-10-25)
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-8:2006/AMD1:2012
Edition 2.0 (2012-11-28)
Amendment 1 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-8:2006/AMD2:2020
Edition 2.0 (2020-07-23)
Amendment 2 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

EN-FR, EN

TC 62/SC 62A

IEC 60601-1-9:2007
Edition 1.0 (2007-07-10)
Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-9:2007/AMD1:2013
Edition 1.0 (2013-06-18)
Amendment 1 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-9:2007/AMD2:2020
Edition 1.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

EN-FR

TC 62/SC 62A

IEC 60601-1-10:2007
Edition 1.0 (2007-11-21)
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-10:2007/AMD1:2013
Edition 1.0 (2013-11-27)
Amendment 1 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

EN-FR, ES

TC 62/SC 62A

IEC 60601-1-10:2007/AMD2:2020
Edition 1.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

EN-FR

TC 62/SC 62A

IEC 60601-1-11:2015
Edition 2.0 (2015-01-20)
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

EN-FR

TC 62/SC 62A

IEC 60601-1-11:2015/AMD1:2020
Edition 2.0 (2020-07-22)
Amendment 1 - Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

EN-FR

TC 62/SC 62A

IEC 60601-1-12:2014
Edition 1.0 (2014-06-19)
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment

EN-FR

TC 62/SC 62A

IEC 60601-1-12:2014/AMD1:2020
Edition 1.0 (2020-07-22)
Amendment 1 - Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment

EN-FR

TC 62/SC 62A

IEC TR 60601-4-1:2017
Edition 1.0 (2017-05-22)
Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy

EN

TC 62/SC 62A

IEC TR 60601-4-2:2016
Edition 1.0 (2016-05-13)
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems

EN

TC 62/SC 62A

IEC TR 60601-4-3:2018
Edition 2.0 (2018-12-13)
Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements

EN

TC 62/SC 62A

IEC TR 60601-4-4:2017
Edition 1.0 (2017-08-17)
Medical electrical equipment - Part 4-4: Guidance and interpretation - Guidance for writers of particular standards when creating alarm system-related requirements

EN

TC 62/SC 62A

IEC 60603-1:1991
Edition 2.0 (1991-06-28)
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR

TC 48/SC 48B

IEC 60603-1:1991/AMD1:1992
Edition 2.0 (1992-06-15)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR

TC 48/SC 48B

IEC 60603-2:1995
Edition 3.0 (1995-09-22)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR

TC 48/SC 48B

IEC 60603-2:1995/AMD1:2000
Edition 3.0 (2000-08-18)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR

TC 48/SC 48B

IEC 60603-3:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-4:1987
Edition 1.0 (1987-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-5:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-6:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

EN-FR, ES, RU

TC 48/SC 48B

IEC 60603-7-1:2011
Edition 3.0 (2011-04-07)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

EN-FR

TC 48/SC 48B

IEC 60603-7-2:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-3:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-4:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-5:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-7:2010
Edition 3.0 (2010-05-31)
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-41:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-51:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-71:2010
Edition 1.0 (2010-06-28)
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-81:2015
Edition 1.0 (2015-12-16)
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-81:2015/COR1:2017
Edition 1.0 (2017-06-30)
Corrigendum 1 - Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-7-82:2016
Edition 1.0 (2016-08-25)
Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

EN-FR

TC 48/SC 48B

IEC 60603-8:1990
Edition 1.0 (1990-12-01)
Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

EN-FR, ES

TC 48/SC 48B

IEC 60603-11:1992
Edition 1.0 (1992-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

EN-FR

TC 48/SC 48B

IEC 60603-12:1992
Edition 1.0 (1992-06-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

EN-FR

TC 48/SC 48B

IEC 60603-13:1995
Edition 1.0 (1995-01-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

EN-FR

TC 48/SC 48B

IEC 60603-14:1998
Edition 1.0 (1998-02-26)
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

EN-FR

TC 48/SC 48B

IEC 60609-1:2004
Edition 1.0 (2004-11-24)
Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines

EN-FR, ES

TC 4

IEC 60609-2:1997
Edition 1.0 (1997-11-13)
Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines

EN-FR, ES

TC 4

IEC 60626-1:2009
Edition 3.0 (2009-08-31)
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements

EN-FR

TC 15

IEC 60626-2:2009
Edition 3.0 (2009-09-29)
Combined flexible materials for electrical insulation - Part 2: Methods of test

EN-FR

TC 15

IEC 60626-3:2008
Edition 3.0 (2008-07-21)
Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

EN-FR

TC 15

IEC 60626-3:2008/AMD1:2012
Edition 3.0 (2012-07-17)
Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

EN-FR

TC 15

IEC 60630:2005 CSV
Edition 2.5 (2005-04-25)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:2002 CSV
Edition 2.4 (2002-12-19)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994+AMD1:1997+AMD2:1998+AMD3:1999 CSV
Edition 2.3 (2001-05-25)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994
Edition 2.0 (1994-09-09)
Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD1:1997
Edition 2.0 (1997-06-05)
Amendment 1 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD2:1998
Edition 2.0 (1998-02-27)
Amendment 2 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD3:1999
Edition 2.0 (1999-07-09)
Amendment 3 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD4:2002
Edition 2.0 (2002-11-28)
Amendment 4 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD5:2005
Edition 2.0 (2005-03-17)
Amendment 5 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD6:2009
Edition 2.0 (2009-05-19)
Amendment 6 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60630:1994/AMD7:2014
Edition 2.0 (2014-06-27)
Amendment 7 - Maximum lamp outlines for incandescent lamps

EN-FR

TC 34/SC 34A

IEC 60641-1:2007
Edition 2.0 (2007-11-14)
Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements

EN-FR, EN

TC 15

IEC 60641-2:2004
Edition 2.0 (2004-06-23)
Pressboard and presspaper for electrical purposes - Part 2: Methods of tests

EN-FR, EN, FR

TC 15

IEC 60641-3-1:2008
Edition 2.0 (2008-07-21)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

EN-FR

TC 15

IEC 60641-3-2:2007
Edition 2.0 (2007-11-14)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1

EN-FR, EN

TC 15

IEC 60657:1979
Edition 1.0 (1979-01-01)
Non-ionizing radiation hazards in the frequency range from 10 MHz to 300 000 MHz

EN-FR, RU

TC 103

IEC 60660:1999
Edition 2.0 (1999-10-29)
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

EN-FR, ES

TC 36

IEC 60662:2011
Edition 2.0 (2011-02-23)
High-pressure sodium vapour lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60664-1:2020
Edition 3.0 (2020-05-26)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR, ES

TC 109

IEC 60664-1:2020/COR1:2020
Edition 3.0 (2020-10-27)
Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR

TC 109

IEC TR 60664-2-1:2011
Edition 2.0 (2011-01-31)
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-1:2011/COR1:2011
Edition 2.0 (2011-10-24)
Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-2:2002
Edition 1.0 (2002-01-22)
Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide

EN

TC 109

IEC 60664-3:2016
Edition 3.0 (2016-11-04)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

EN-FR, ES

TC 109

IEC 60664-4:2005
Edition 2.0 (2005-09-15)
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress

EN-FR, ES

TC 109

IEC 60667-1:2020
Edition 2.0 (2020-04-09)
Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements

EN-FR

TC 15

IEC 60667-2:2020
Edition 2.0 (2020-05-13)
Vulcanized fibre for electrical purposes - Part 2: Methods of test

EN-FR

TC 15

IEC 60667-3-1:2020
Edition 2.0 (2020-03-25)
Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets

EN-FR

TC 15

IEC 60672-1:1995
Edition 2.0 (1995-06-27)
Ceramic and glass insulating materials - Part 1: Definitions and classification

EN-FR, EN, FR, ES

TC 15

IEC 60672-2:1999
Edition 2.0 (1999-12-22)
Ceramic and glass insulating materials - Part 2: Methods of test

EN-FR, EN, FR, ES

TC 15

IEC 60672-3:1997
Edition 2.0 (1997-10-17)
Ceramic and glass-insulating materials - Part 3: Specifications for individual materials

EN-FR, EN, FR, ES

TC 15

IEC 60674-1:1980
Edition 1.0 (1980-01-01)
Specification for plastic films for electrical purposes. Part 1: Definitions and general requirements

EN-FR, ES

TC 15

IEC 60674-2:2016
Edition 2.0 (2016-11-18)
Specification for plastic films for electrical purposes - Part 2: Methods of test

EN-FR, EN

TC 15

IEC 60674-2:2016/COR1:2017
Edition 2.0 (2017-12-19)
Corrigendum 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test

EN

TC 15

IEC 60674-2:2016/AMD1:2019
Edition 2.0 (2019-01-24)
Amendment 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test

EN-FR

TC 15

IEC 60674-3-1:2021
Edition 2.0 (2021-08-25)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors

EN-FR

TC 15

IEC 60674-3-2:2019
Edition 2.0 (2019-01-16)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation

EN-FR

TC 15

IEC 60674-3-3:1992
Edition 1.0 (1992-04-30)
Specification for plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Requirements forpolycarbonate (PC) films used for electrical insulation

EN-FR, ES

TC 15

IEC 60674-3-4:1993
Edition 1.0 (1993-03-19)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation

EN-FR, ES

TC 15

IEC 60674-3-7:1992
Edition 1.0 (1992-04-30)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation

EN-FR, ES

TC 15

IEC 60674-3-8:2011
Edition 1.0 (2011-07-13)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

EN-FR

TC 15

IEC 60674-3-8:2011/AMD1:2016
Edition 1.0 (2016-11-22)
Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

EN-FR

TC 15

IEC 60675:1994+AMD1:1998 CSV
Edition 2.1 (1998-11-24)
Household electric direct-acting room heaters - Methods for measuring performance

EN-FR

TC 59/SC 59C

IEC 60675:1994
Edition 2.0 (1994-08-30)
Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60675:1994/AMD1:1998
Edition 2.0 (1998-07-09)
Amendment 1 - Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, ES

TC 59/SC 59C

IEC 60675:1994/AMD2:2018
Edition 2.0 (2018-04-20)
Amendment 2 - Household electric direct-acting room heaters - Methods for measuring performance

EN-FR, EN, ES

TC 59/SC 59C

IEC 60682:1980
Edition 1.0 (1980-01-01)
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR, RU

TC 34/SC 34A

IEC 60682:1980/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR

TC 34/SC 34A

IEC 60682:1980/AMD2:1997
Edition 1.0 (1997-04-23)
Amendment 2 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

EN-FR, ES

TC 34/SC 34A

IEC 60684-1:2003
Edition 2.0 (2003-04-28)
Flexible insulating sleeving - Part 1: Definitions and general requirements

EN-FR, ES

TC 15

IEC 60684-2:2011
Edition 3.0 (2011-08-10)
Flexible insulating sleeving - Part 2: Methods of test

EN-FR

TC 15

IEC 60684-3-100:2001
Edition 2.0 (2001-07-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving

EN-FR, ES

TC 15

IEC 60684-3-116:2010
Edition 3.0 (2010-06-16)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose

EN-FR

TC 15

IEC 60684-3-121:2001
Edition 2.0 (2001-07-18)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving

EN-FR, ES

TC 15

IEC 60684-3-136:1997
Edition 1.0 (1997-12-22)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

EN-FR, ES

TC 15

IEC 60684-3-136:1997/COR1:1999
Edition 1.0 (1999-02-19)
Corrigendum 1 - Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

EN-FR

TC 15

IEC 60684-3-145:2001
Edition 1.0 (2001-07-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving

EN-FR, ES

TC 15

IEC 60684-3-151:1998
Edition 1.0 (1998-06-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose

EN-FR, ES

TC 15

IEC 60684-3-165:2004
Edition 1.0 (2004-05-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

EN-FR, ES

TC 15

IEC 60684-3-205:2011
Edition 1.0 (2011-06-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1

EN-FR

TC 15

IEC 60684-3-209:2010
Edition 3.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded

EN-FR

TC 15

IEC 60684-3-211:2007
Edition 3.0 (2007-02-15)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1

EN-FR, EN, ES

TC 15

IEC 60684-3-212:2005
Edition 2.0 (2005-11-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings

EN-FR, EN

TC 15

IEC 60684-3-214:2019
Edition 4.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall

EN-FR

TC 15

IEC 60684-3-216:2019
Edition 2.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving

EN-FR

TC 15

IEC 60684-3-228:2004
Edition 2.0 (2004-05-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

EN-FR, ES

TC 15

IEC 60684-3-229:2003
Edition 1.0 (2003-02-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

EN-FR, ES

TC 15

IEC 60684-3-233:2006
Edition 2.0 (2006-01-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1

EN

TC 15

IEC 60684-3-240:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving

EN-FR, ES

TC 15

IEC 60684-3-246:2007
Edition 3.0 (2007-02-15)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded

EN-FR, EN, ES

TC 15

IEC 60684-3-247:2019
Edition 2.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall

EN-FR

TC 15

IEC 60684-3-248:2007
Edition 1.0 (2007-02-16)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

EN-FR, EN

TC 15

IEC 60684-3-271:2011
Edition 3.0 (2011-06-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

EN-FR

TC 15

IEC 60684-3-280:2019
Edition 2.0 (2019-08-20)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

EN-FR

TC 15

IEC 60684-3-281:2010
Edition 1.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

EN-FR

TC 15

IEC 60684-3-282:2010
Edition 1.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control

EN-FR

TC 15

IEC 60684-3-283:2019
Edition 2.0 (2019-08-20)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation

EN-FR

TC 15

IEC 60684-3-284:2014
Edition 1.0 (2014-10-23)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications

EN-FR, EN

TC 15

IEC 60684-3-285:2014
Edition 1.0 (2014-10-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation

EN-FR, EN

TC 15

IEC 60684-3-300:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated

EN-FR, ES

TC 15

IEC 60684-3-320:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated

EN-FR, ES

TC 15

IEC 60684-3-340:2003
Edition 2.0 (2003-04-29)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving

EN-FR, ES

TC 15

IEC 60684-3-343:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

EN-FR, ES

TC 15

IEC 60684-3-400:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating

EN-FR, ES

TC 15

IEC 60684-3-403:2002
Edition 2.0 (2002-05-17)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating

EN-FR, ES

TC 15

IEC 60684-3-406:2003
Edition 2.0 (2003-07-29)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating

EN-FR, ES

TC 15

IEC 60684-3-409:1999
Edition 1.0 (1999-06-30)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating

EN-FR, ES

TC 15

IEC 60684-3-420:2002
Edition 2.0 (2002-05-17)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating

EN-FR, ES

TC 15

IEC TS 60695-11-21:2005
Edition 1.0 (2005-05-04)
Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials

EN-FR

TC 89

IEC 60715:2017
Edition 2.0 (2017-07-28)
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

EN-FR

TC 121/SC 121A

IEC 60763-1:2010
Edition 2.0 (2010-08-06)
Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements

EN-FR

TC 15

IEC 60763-2:2007
Edition 2.0 (2007-02-15)
Specification for laminated pressboard - Part 2: Methods of test

EN-FR, EN

TC 15

IEC 60763-3-1:2010
Edition 2.0 (2010-08-06)
Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2

EN-FR

TC 15

IEC TR 60778:1984
Edition 1.0 (1984-01-01)
Brush-holders for slip-rings, Group R - type RA

EN-FR

TC 2

IEC 60793-1-1:2017
Edition 4.0 (2017-01-25)
Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance

EN-FR, EN, ES

TC 86/SC 86A

IEC 60793-1-20:2014
Edition 2.0 (2014-10-10)
Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-20:2014/COR1:2016
Edition 2.0 (2016-03-04)
Corrigendum 1 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry

EN-FR

TC 86/SC 86A

IEC 60793-1-21:2001
Edition 1.0 (2001-08-30)
Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry

EN-FR

TC 86/SC 86A

IEC 60793-1-22:2001
Edition 1.0 (2001-08-30)
Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement

EN-FR

TC 86/SC 86A

IEC 60793-1-30:2010
Edition 2.0 (2010-05-19)
Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test

EN-FR, EN

TC 86/SC 86A

IEC 60793-1-31:2019
Edition 3.0 (2019-02-06)
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength

EN-FR

TC 86/SC 86A

IEC 60793-1-32:2018
Edition 3.0 (2018-11-16)
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-33:2017
Edition 2.0 (2017-08-16)
Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-34:2021
Edition 3.0 (2021-02-10)
Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl

EN-FR

TC 86/SC 86A

IEC 60793-1-40:2019
Edition 2.0 (2019-03-27)
Optical fibres - Part 1-40: Attenuation measurement methods

EN-FR

TC 86/SC 86A

IEC 60793-1-41:2010
Edition 3.0 (2010-08-31)
Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth

EN-FR

TC 86/SC 86A

IEC 60793-1-42:2013
Edition 3.0 (2013-01-24)
Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion

EN-FR

TC 86/SC 86A

IEC 60793-1-43:2015
Edition 2.0 (2015-03-27)
Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement

EN-FR, EN, ES

TC 86/SC 86A

IEC 60793-1-44:2011
Edition 2.0 (2011-04-20)
Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength

EN-FR, EN

TC 86/SC 86A

IEC 60793-1-45:2017
Edition 2.0 (2017-11-09)
Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-46:2001
Edition 1.0 (2001-07-26)
Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance

EN-FR

TC 86/SC 86A

IEC 60793-1-47:2017
Edition 4.0 (2017-10-11)
Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-48:2017
Edition 3.0 (2017-08-23)
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

EN-FR

TC 86/SC 86A

IEC 60793-1-49:2018
Edition 3.0 (2018-08-15)
Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay

EN-FR

TC 86/SC 86A

IEC 60793-1-50:2014
Edition 2.0 (2014-09-09)
Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-51:2014
Edition 2.0 (2014-02-05)
Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-52:2014
Edition 2.0 (2014-02-05)
Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-53:2014
Edition 2.0 (2014-02-05)
Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-54:2018
Edition 3.0 (2018-01-12)
Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation

EN-FR, ES

TC 86/SC 86A

IEC 60793-1-60:2017
Edition 1.0 (2017-02-07)
Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length

EN-FR, EN

TC 86/SC 86A

IEC 60793-1-61:2017
Edition 1.0 (2017-02-07)
Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk

EN-FR, EN

TC 86/SC 86A

IEC 60793-2:2019
Edition 9.0 (2019-11-15)
Optical fibres - Part 2: Product specifications - General

EN-FR

TC 86/SC 86A

IEC 60793-2-10:2019
Edition 7.0 (2019-05-22)
Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

EN-FR

TC 86/SC 86A

IEC 60793-2-20:2015
Edition 3.0 (2015-11-19)
Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres

EN-FR, EN

TC 86/SC 86A

IEC 60793-2-30:2015
Edition 4.0 (2015-06-25)
Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres

EN-FR, EN

TC 86/SC 86A

IEC 60793-2-40:2021
Edition 5.0 (2021-02-25)
Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres

EN-FR

TC 86/SC 86A

IEC 60793-2-50:2018
Edition 6.0 (2018-12-14)
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

EN-FR

TC 86/SC 86A

IEC 60793-2-60:2008
Edition 1.0 (2008-02-27)
Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres

EN-FR, EN

TC 86/SC 86A

IEC 60793-2-70:2017
Edition 1.0 (2017-02-07)
Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres

EN-FR, EN

TC 86/SC 86A

IEC 60794-1-1:2015
Edition 4.0 (2015-11-13)
Optical fibre cables - Part 1-1: Generic specification - General

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-1-2:2021
Edition 5.0 (2021-01-15)
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance

EN-FR

TC 86/SC 86A

IEC 60794-1-3:2017
Edition 1.0 (2017-05-11)
Optical fibre cables - Part 1-3: Generic specification - Optical cable elements

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-1-21:2015
Edition 1.0 (2015-03-10)
Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-1-21:2015/AMD1:2020
Edition 1.0 (2020-03-05)
Amendment 1 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods

EN-FR

TC 86/SC 86A

IEC 60794-1-22:2017
Edition 2.0 (2017-10-05)
Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-1-23:2019
Edition 2.0 (2019-10-09)
Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods

EN-FR

TC 86/SC 86A

IEC 60794-1-31:2021
Edition 2.0 (2021-06-28)
Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon

EN-FR

TC 86/SC 86A

IEC 60794-1-215:2020
Edition 1.0 (2020-06-26)
Optical fibre cables – Part 1-215: Generic specification – Basic optical cable test procedures – Environmental test methods – Cable external freezing test, Method F15

EN-FR

TC 86/SC 86A

IEC 60794-2:2017
Edition 4.0 (2017-06-22)
Optical fibre cables - Part 2: Indoor cables - Sectional specification

EN-FR

TC 86/SC 86A

IEC 60794-2-10:2011
Edition 2.0 (2011-08-10)
Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables

EN-FR

TC 86/SC 86A

IEC 60794-2-11:2019
Edition 3.0 (2019-04-12)
Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling

EN-FR

TC 86/SC 86A

IEC 60794-2-11:2019/AMD1:2020
Edition 3.0 (2020-11-18)
Amendment 1 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling

EN-FR, EN

TC 86/SC 86A

IEC 60794-2-20:2013
Edition 3.0 (2013-11-05)
Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables

EN-FR

TC 86/SC 86A

IEC 60794-2-21:2019
Edition 3.0 (2019-04-12)
Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling

EN-FR

TC 86/SC 86A

IEC 60794-2-21:2019/AMD1:2020
Edition 3.0 (2020-11-18)
Amendment 1 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling

EN-FR, EN

TC 86/SC 86A

IEC 60794-2-22:2016
Edition 1.0 (2016-12-07)
Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors

EN-FR

TC 86/SC 86A

IEC 60794-2-30:2019
Edition 3.0 (2019-03-18)
Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies

EN-FR

TC 86/SC 86A

IEC 60794-2-31:2019
Edition 3.0 (2019-04-12)
Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling

EN-FR

TC 86/SC 86A

IEC 60794-2-31:2019/AMD1:2020
Edition 3.0 (2020-11-18)
Amendment 1 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling

EN-FR, EN

TC 86/SC 86A

IEC 60794-2-40:2008
Edition 2.0 (2008-03-26)
Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-2-41:2008
Edition 1.0 (2008-06-25)
Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-2-42:2008
Edition 1.0 (2008-04-09)
Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-2-50:2020
Edition 2.0 (2020-01-10)
Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies

EN-FR

TC 86/SC 86A

IEC 60794-3:2014
Edition 4.0 (2014-09-09)
Optical fibre cables - Part 3: Outdoor cables - Sectional specification

EN-FR

TC 86/SC 86A

IEC 60794-3-10:2015
Edition 3.0 (2015-01-08)
Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables

EN-FR

TC 86/SC 86A

IEC 60794-3-11:2010
Edition 2.0 (2010-06-16)
Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables

EN-FR, EN

TC 86/SC 86A

IEC 60794-3-12:2021
Edition 3.0 (2021-01-27)
Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling

EN-FR

TC 86/SC 86A

IEC 60794-3-20:2016
Edition 3.0 (2016-09-15)
Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables

EN-FR

TC 86/SC 86A

IEC 60794-3-21:2015
Edition 2.0 (2015-11-19)
Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling

EN-FR, EN

TC 86/SC 86A

IEC 60794-3-30:2008
Edition 2.0 (2008-04-29)
Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-3-40:2008
Edition 1.0 (2008-10-08)
Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-3-70:2021
Edition 2.0 (2021-04-07)
Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment

EN-FR, EN

TC 86/SC 86A

IEC 60794-4:2018
Edition 2.0 (2018-06-25)
Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines

EN-FR, ES

TC 86/SC 86A

IEC 60794-4-10:2014
Edition 2.0 (2014-10-29)
Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines

EN-FR, EN, ES

TC 86/SC 86A

IEC 60794-4-20:2018
Edition 2.0 (2018-08-28)
Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables

EN-FR

TC 86/SC 86A

IEC 60794-5:2014
Edition 2.0 (2014-10-08)
Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing

EN-FR

TC 86/SC 86A

IEC 60794-5-10:2014
Edition 1.0 (2014-02-05)
Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing

EN-FR

TC 86/SC 86A

IEC 60794-5-20:2014
Edition 1.0 (2014-02-14)
Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing

EN-FR, EN

TC 86/SC 86A

IEC TR 60797:1984
Edition 1.0 (1984-01-01)
Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric

EN-FR

TC 36

IEC 60800:2021
Edition 4.0 (2021-11-22)
Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation

EN-FR

TC 20

IEC 60807-1:1991
Edition 2.0 (1991-10-15)
Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality

EN-FR

TC 48/SC 48B

IEC 60807-2:1992
Edition 2.0 (1992-11-13)
Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

EN-FR

TC 48/SC 48B

IEC 60807-2:1992/AMD1:1996
Edition 2.0 (1996-01-30)
Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

EN-FR

TC 48/SC 48B

IEC 60807-3:1990
Edition 1.0 (1990-07-18)
Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction

EN-FR, RU

TC 48/SC 48B

IEC 60807-6:1988
Edition 1.0 (1988-05-15)
Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types

EN-FR, RU

TC 48/SC 48B

IEC 60807-7:1991
Edition 1.0 (1991-12-20)
Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality

EN-FR

TC 48/SC 48B

IEC 60807-8:1992
Edition 1.0 (1992-01-31)
Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen

EN-FR

TC 48/SC 48B

IEC 60807-9:1993
Edition 1.0 (1993-04-20)
Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors

EN-FR

TC 48/SC 48B

IEC 60810:2017
Edition 5.0 (2017-09-25)
Lamps, light sources and LED packages for road vehicles - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60810:2017/AMD1:2019
Edition 5.0 (2019-04-08)
Amendment 1 - Lamps, light sources and LED packages for road vehicles - Performance requirements

EN-FR

TC 34/SC 34A

IEC TS 60815-1:2008
Edition 1.0 (2008-10-29)
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles

EN, ES

TC 36

IEC TS 60815-2:2008
Edition 1.0 (2008-10-29)
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems

EN, ES

TC 36

IEC TS 60815-3:2008
Edition 1.0 (2008-10-29)
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems

EN, ES

TC 36

IEC TS 60815-4:2016
Edition 1.0 (2016-10-26)
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems

EN

TC 36

IEC 60819-1:2009
Edition 3.0 (2009-09-29)
Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements

EN-FR

TC 15

IEC 60819-2:2001
Edition 1.0 (2001-07-04)
Non-cellulosic papers for electrical purposes - Part 2: Methods of test

EN-FR, ES

TC 15

IEC 60819-3-1:2001
Edition 1.0 (2001-07-05)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper

EN-FR, ES

TC 15

IEC 60819-3-2:2001
Edition 1.0 (2001-07-04)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper

EN-FR, ES

TC 15

IEC 60819-3-3:2011
Edition 3.0 (2011-09-13)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

EN-FR

TC 15

IEC 60819-3-4:2013
Edition 2.0 (2013-12-12)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles

EN-FR

TC 15

IEC 60838-1:2016
Edition 5.0 (2016-05-19)
Miscellaneous lampholders - Part 1: General requirements and tests

EN-FR

TC 34/SC 34B

IEC 60838-1:2016/AMD1:2017
Edition 5.0 (2017-02-02)
Amendment 1 - Miscellaneous lampholders - Part 1: General requirements and tests

EN-FR

TC 34/SC 34B

IEC 60838-1:2016/AMD2:2020
Edition 5.0 (2020-02-26)
Amendment 2 - Miscellaneous lampholders - Part 1: General requirements and tests

EN-FR

TC 34/SC 34B

IEC 60838-2-1:1994
Edition 1.0 (1994-10-15)
Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

EN-FR, ES

TC 34/SC 34B

IEC 60838-2-1:1994/AMD1:1998
Edition 1.0 (1998-06-10)
Amendment 1 - Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

EN-FR, ES

TC 34/SC 34B

IEC 60838-2-1:1994/AMD2:2004
Edition 1.0 (2004-10-07)
Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14

EN-FR

TC 34/SC 34B

IEC 60838-2-1:1994/AMD2:2004/COR1:2013
Edition 1.0 (2013-05-22)
Corrigendum 1 - Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14

EN-FR

TC 34/SC 34B

IEC 60838-2-2:2006+AMD1:2012 CSV
Edition 1.1 (2012-04-27)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

EN-FR

TC 34/SC 34B

IEC 60838-2-2:2006
Edition 1.0 (2006-05-05)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

EN-FR, ES

TC 34/SC 34B

IEC 60838-2-2:2006/AMD1:2012
Edition 1.0 (2012-03-27)
Amendment 1 - Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

EN-FR, ES

TC 34/SC 34B

IEC 60838-2-3:2016
Edition 1.0 (2016-05-12)
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps

EN-FR

TC 34/SC 34B

IEC 60864-1:1986
Edition 1.0 (1986-01-01)
Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. Part 1: Interface standards for systems using dedicated interconnections

EN-FR

TC 103

IEC 60864-1:1986/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment. Part 1: Interface standards for systems using dedicated interconnections

EN-FR

TC 103

IEC 60864-2:1997
Edition 1.0 (1997-06-17)
Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections

EN-FR

TC 103

IEC TR 60878:2015
Edition 3.0 (2015-09-22)
Graphical symbols for electrical equipment in medical practice

EN-FR

TC 62/SC 62A

IEC TR 60882:1986
Edition 1.0 (1986-12-15)
Pre-heat requirements for starterless tubular fluorescent lamps

EN-FR

TC 34/SC 34A

IEC TR 60887:2010
Edition 3.0 (2010-06-24)
Glass bulb designation system for lamps

EN-FR

TC 34/SC 34A

IEC TR 60890:2014
Edition 2.0 (2014-05-07)
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

EN-FR

TC 121/SC 121B

IEC 60891:2021
Edition 3.0 (2021-10-27)
Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics

EN-FR

TC 82

IEC 60893-1:2004
Edition 2.0 (2004-01-26)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

EN-FR, ES

TC 15

IEC 60893-2:2003
Edition 2.0 (2003-06-24)
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test

EN-FR, ES

TC 15

IEC 60893-3-1:2012
Edition 3.0 (2012-07-24)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets

EN-FR

TC 15

IEC 60893-3-2:2003+AMD1:2011 CSV
Edition 2.1 (2011-11-28)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

EN-FR

TC 15

IEC 60893-3-2:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

EN-FR, ES

TC 15

IEC 60893-3-2:2003/AMD1:2011
Edition 2.0 (2011-05-27)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

EN-FR, ES

TC 15

IEC 60893-3-3:2003+AMD1:2011 CSV
Edition 2.1 (2012-01-27)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

EN-FR

TC 15

IEC 60893-3-3:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

EN-FR, ES

TC 15

IEC 60893-3-3:2003/AMD1:2011
Edition 2.0 (2011-11-28)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

EN-FR, ES

TC 15

IEC 60893-3-4:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

EN-FR, ES

TC 15

IEC 60893-3-4:2003/COR1:2014
Edition 2.0 (2014-03-19)
Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

EN-FR

TC 15

IEC 60893-3-4:2003/AMD1:2012
Edition 2.0 (2012-10-12)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

EN-FR, ES

TC 15

IEC 60893-3-5:2003+AMD1:2009 CSV
Edition 2.1 (2009-10-13)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

EN-FR

TC 15

IEC 60893-3-5:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

EN-FR, ES

TC 15

IEC 60893-3-5:2003/AMD1:2009
Edition 2.0 (2009-08-28)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

EN-FR, ES

TC 15

IEC 60893-3-6:2003+AMD1:2009 CSV
Edition 2.1 (2009-11-10)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

EN-FR

TC 15

IEC 60893-3-6:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

EN-FR, ES

TC 15

IEC 60893-3-6:2003/AMD1:2009
Edition 2.0 (2009-09-29)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

EN-FR, ES

TC 15

IEC 60893-3-6:2003/AMD2:2017
Edition 2.0 (2017-09-15)
Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

EN-FR

TC 15

IEC 60893-3-7:2003+AMD1:2009 CSV
Edition 2.1 (2009-11-10)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

EN-FR

TC 15

IEC 60893-3-7:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

EN-FR, ES

TC 15

IEC 60893-3-7:2003/AMD1:2009
Edition 2.0 (2009-09-29)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

EN-FR, ES

TC 15

IEC TR 60893-4:2014
Edition 2.0 (2014-10-29)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

EN

TC 15

IEC TR 60893-4:2014/AMD1:2017
Edition 2.0 (2017-09-22)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

EN

TC 15

IEC 60901:1996+AMD1:1997+AMD2:2000 CSV
Edition 2.2 (2001-11-20)
Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996
Edition 2.0 (1996-03-20)
Single-capped fluorescent lamps - Performance specifications

EN-FR, ES

TC 34/SC 34A

IEC 60901:1996/AMD1:1997
Edition 2.0 (1997-06-05)
Amendment 1 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996/AMD2:2000
Edition 2.0 (2000-04-28)
Amendment 2 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996/AMD3:2004
Edition 2.0 (2004-05-17)
Amendment 3 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996/AMD4:2007
Edition 2.0 (2007-12-07)
Amendment 4 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996/AMD5:2011
Edition 2.0 (2011-11-23)
Amendment 5 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60901:1996/AMD6:2014
Edition 2.0 (2014-12-17)
Amendment 6 - Single-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60904-1:2020
Edition 3.0 (2020-09-25)
Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

EN-FR

TC 82

IEC 60904-1-1:2017
Edition 1.0 (2017-05-18)
Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices

EN-FR, ES

TC 82

IEC 60904-2:2015
Edition 3.0 (2015-01-23)
Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices

EN-FR, ES

TC 82

IEC 60904-3:2019
Edition 4.0 (2019-02-15)
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

EN-FR

TC 82

IEC 60904-4:2019
Edition 2.0 (2019-11-12)
Photovoltaic devices - Part 4: Photovoltaic reference devices - Procedures for establishing calibration traceability

EN-FR, ES

TC 82

IEC 60904-4:2019/COR1:2020
Edition 2.0 (2020-09-25)
Corrigendum 1 - Photovoltaic devices - Part 4: Photovoltaic reference devices - Procedures for establishing calibration traceability

EN-FR

TC 82

IEC 60904-5:2011
Edition 2.0 (2011-02-17)
Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method

EN-FR, ES

TC 82

IEC 60904-7:2019
Edition 4.0 (2019-08-20)
Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices

EN-FR, ES

TC 82

IEC 60904-8:2014
Edition 3.0 (2014-05-08)
Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device

EN-FR, ES

TC 82

IEC 60904-8-1:2017
Edition 1.0 (2017-05-18)
Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices

EN-FR, ES

TC 82

IEC 60904-9:2020
Edition 3.0 (2020-09-18)
Photovoltaic devices - Part 9: Classification of solar simulator characteristics

EN-FR

TC 82

IEC 60904-10:2020
Edition 3.0 (2020-09-18)
Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements

EN-FR

TC 82

IEC TS 60904-13:2018
Edition 1.0 (2018-08-29)
Photovoltaic devices - Part 13: Electroluminescence of photovoltaic modules

EN

TC 82

IEC TR 60904-14:2020
Edition 1.0 (2020-11-25)
Photovoltaic devices - Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions

EN

TC 82

IEC 60921:2004+AMD1:2006 CSV
Edition 2.1 (2006-06-26)
Ballasts for tubular fluorescent lamps - Performance requirements

EN-FR, EN, FR

TC 34/SC 34C

IEC 60921:2004
Edition 2.0 (2004-08-09)
Ballasts for tubular fluorescent lamps - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60921:2004/AMD1:2006
Edition 2.0 (2006-05-05)
Amendment 1 - Ballasts for tubular fluorescent lamps - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60923:2005+AMD1:2006 CSV
Edition 3.1 (2006-09-25)
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

EN-FR, EN, FR

TC 34/SC 34C

IEC 60923:2005
Edition 3.0 (2005-09-07)
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60923:2005/AMD1:2006
Edition 3.0 (2006-07-25)
Amendment 1 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60927:2007
Edition 3.0 (2007-06-14)
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60927:2007/AMD1:2013
Edition 3.0 (2013-09-16)
Amendment 1 - Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60929:2011
Edition 4.0 (2011-05-19)
AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

EN-FR, ES

TC 34/SC 34C

IEC 60929:2011/COR1:2011
Edition 4.0 (2011-09-22)
Corrigendum 1 - AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

EN-FR

TC 34/SC 34C

IEC 60929:2011/AMD1:2015
Edition 4.0 (2015-10-22)
Amendment 1 - AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

EN-FR

TC 34/SC 34C

IEC TR 60930:2008
Edition 2.0 (2008-09-19)
Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems

EN

TC 62/SC 62A

IEC 60947-1:2020
Edition 6.0 (2020-04-22)
Low-voltage switchgear and controlgear - Part 1: General rules

EN-FR

TC 121/SC 121A

IEC 60947-2:2016
Edition 5.0 (2016-06-07)
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR, ES

TC 121/SC 121A

IEC 60947-2:2016/COR1:2016
Edition 5.0 (2016-11-18)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR

TC 121/SC 121A

IEC 60947-2:2016/AMD1:2019
Edition 5.0 (2019-07-08)
Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR, ES

TC 121/SC 121A

IEC 60947-3:2020
Edition 4.0 (2020-04-22)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

EN-FR

TC 121/SC 121A

IEC 60947-3:2020/COR1:2021
Edition 4.0 (2021-10-22)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018
Edition 4.0 (2018-10-25)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR, ES

TC 121/SC 121A

IEC 60947-4-1:2018/ISH1:2020
Edition 4.0 (2020-03-13)
Interpretation sheet 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018/COR1:2020
Edition 4.0 (2020-04-22)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018/COR2:2021
Edition 4.0 (2021-04-20)
Corrigendum 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-2:2020
Edition 4.0 (2020-06-26)
Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-3:2020
Edition 3.0 (2020-07-14)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads

EN

TC 121/SC 121A

IEC 60947-5-1:2016
Edition 4.0 (2016-05-25)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-1:2016/COR1:2016
Edition 4.0 (2016-07-15)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR

TC 121/SC 121A

IEC 60947-5-1:2016/COR2:2020
Edition 4.0 (2020-04-22)
Corrigendum 2 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR

TC 121/SC 121A

IEC 60947-5-2:2019
Edition 4.0 (2019-10-18)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-3:2013
Edition 2.0 (2013-08-06)
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-4:2002
Edition 2.0 (2002-10-15)
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-4:2002/AMD1:2019
Edition 2.0 (2019-05-22)
Amendment 1 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997+AMD1:2005 CSV
Edition 1.1 (2005-04-06)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR

TC 121/SC 121A

IEC 60947-5-5:1997
Edition 1.0 (1997-11-26)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997/AMD1:2005
Edition 1.0 (2005-01-17)
Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997/AMD1:2005/COR1:2007
Edition 1.0 (2007-07-25)
Corrigendum 1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR

TC 121/SC 121A

IEC 60947-5-5:1997/AMD2:2016
Edition 1.0 (2016