SDG 6 - Clean water and sanitation

Ensure availability and sustainable management of water and sanitation for all

SDG 6

Safe and affordable water

Demand for drinking water is forecast to rise by 55% until 2050. The supply of clean water is complex: pumps extract water from wells, rivers, lakes or oceans. The water is then transported through pipelines to be purified, filtered or desalinated. Even the simplest water treatment plants employ electric pumps, valves and scrapers. More modern systems also have thousands of sensors that control the length of water flow on taps, toilets or irrigation systems. All of them rely on IEC work.

2 IEC CA Systems and more than 90 IEC Standards from 34 IEC TC/SCs contribute to SDG 6.

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

Water extraction (pump)

Ultraviolet light

Irrigation

Ocean thermal energy coversion

Ocean thermal energy conversion (OTEC)

Water treatment

Industrial water use

Electric motor

Control and instrumentation

Valve

Sensor

IEC work directly impacts the following SDG targets

6.1 Safe and affordable drinking water for all

IEC work is foundational for water management from extraction to use and reuse. Supplying and treating water requires many electrical and electronic devices and systems.

IEC TC 4: Hydraulic turbines;
IEC TC 5: Steam turbines;
IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
IEC TC 27: Industrial electroheating and electromagnetic processing;
IEC TC 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
IEC TC 57: Power systems management and associated information exchange, and IEC TC 65, Industrial-process measurement, control and automation, cover the supervisory control and data acquisition systems (SCADA) that are used in pumping and control stations, as well as the sensors for switches;
IEC TC 64: Electrical installations and protection against electric shock;
IEC SC 65B: Measurement and control devices, provides the technical foundation for the many different kinds of valves that control water flow, pressure, temperature, liquid levels, etc. They are indispensable in water distribution and to avoid leakages. The IEC 60534 series of standards is considered the bible for the water purification and waste water treatment industry;
IEC SC 65C: Industrial networks;
IEC SC 65E: Devices and integration in enterprise systems;
IEC TC 70: Degrees of protection provided by enclosures;
IEC TC 72: Automatic electrical controls;
IEC TC 86 and 3 SCs: Fibre optics;
IEC TC 111: Environmental standardization for electrical and electronic products and systems;
IEC SC 121A: Low-voltage switchgear and controlgear;
ISO/IEC JTC 1/SC 6: Telecommunications and information exchange between systems;

6.3 Reducing water pollution, increase wastewater treatment and reuse

Monitoring chemical use in manufacturing; the electrification of shipping at sea and in harbours can significantly reduce water pollution. Wastewater treatment is also underpinned by IEC International Standards.

IEC TC 34: Lamps and related equipment, in particular;
IEC SC 34D: Luminaires, and IEC TC 61, Safety of household and similar electrical appliances, are essential for a number of disinfection methods which involve ultraviolet light or "cold" electrical discharge;
IEC TC 64: Electrical installations and protection against electric shock;
IEC SC 65B: Measurement and control devices, provides the technical foundation for the many different kinds of valves that control water flow, pressure, temperature, liquid levels, etc. They are indispensable in water distribution and to avoid leakages. The IEC 60534 series of standards is considered the bible for the water purification and waste water treatment industry;
IEC TC 87: Ultrasonics;
IEC TC 111: Environmental standardization for electrical and electronic products and systems;
IEC TC 114: Marine energy - Wave, tidal and other water current converters, also prepares technical specifications for ocean thermal energy conversion (OTEC). It prepares technical specifications that apply to some desalination technologies and seawater air conditioning (SWAC) systems;
ISO/IEC JTC 1/SC 6: Telecommunications and information exchange between systems;
IECQ: IEC Quality Assessment System for Electronic Components [hazardous substances]

6.4 More efficient water use and reduced water scarcity

Sensors on taps and toilets control water flow. Irrigation systems and reuse of brown water for sanitation can increase efficiency of water use and reduce water scarcity.

IEC SC 23E: Circuit-breakers and similar equipment for household use;
IEC TC 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
IEC TC 47: Semiconductor devices (sensors), in particular, IEC SC 47F: Micro-electromechanical systems;
IEC TC 57: Power systems management and associated information exchange, and IEC TC 65, Industrial-process measurement, control and automation, cover the supervisory control and data acquisition systems (SCADA) that are used in pumping and control stations, as well as the sensors for switches;
IEC TC 59: Performance of household and similar electrical appliances;
IEC TC 61 and 5 SCs: Safety of household and similar electrical appliances;
IEC TC 64: Electrical installations and protection against electric shock;
IEC SC 65B: Measurement and control devices, provides the technical foundation for the many different kinds of valves that control water flow, pressure, temperature, liquid levels, etc. They are indispensable in water distribution and to avoid leakages. The IEC 60534 series of standards is considered the bible for the water purification and waste water treatment industry;
IEC TC 72: Automatic electrical controls;
IEC TC 82: Solar photovoltaic energy systems, develops standards that apply to off-grid solar irrigation;
ISO/IEC JTC 1/SC 6: Telecommunications and information exchange between systems;
IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components.

6.A Water harvesting, desalination, water efficiency, wastewater treatment, recycling and reuse technologies

Multiple technologies that enable water harvesting and desalination, as well as sensor driven irrigation systems and water purification/reuse technologies are underpinned by IEC work.

IEC TC 4:Hydraulic turbines;
IEC TC 5:Steam turbines;
IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
IEC TC 27: Industrial electroheating and electromagnetic processing;
IEC TC 34: Lamps and related equipment, in particular, IEC SC 34D Luminaires, and IEC TC 61: Safety of household and similar electrical appliances, are essential for a number of disinfection methods which involve ultraviolet light or "cold" electrical discharge;
IEC TC 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
IEC TC 47: Semiconductor devices (sensors), in particular, IEC SC 47F Micro-electromechanical systems;
IEC TC 57: Power systems management and associated information exchange, and IEC TC 65, Industrial-process measurement, control and automation, cover the supervisory control and data acquisition systems (SCADA) that are used in pumping and control stations, as well as the sensors for switches;
IEC TC 64: Electrical installations and protection against electric shock IEC SC 65B: Measurement and control devices, provides the technical foundation for the many different kinds of valves that control water flow, pressure, temperature, liquid levels, etc. They are indispensable in water distribution and to avoid leakages. The IEC 60534 series of standards is considered the bible for the water purification and waste water treatment industry;
IEC SC 65C: Industrial networks;
IEC SC 65E:Devices and integration in enterprise systems;
IEC TC 70: Degrees of protection provided by enclosures;
IEC TC 72: Automatic electrical controls;
IEC TC 82: Solar photovoltaic energy systems, develops standards that apply to off-grid solar irrigation;
IEC TC 86 and 3 SCs:Fibre optics;
IEC TC 87: Ultrasonics;
IEC TC 111: Environmental standardization for electrical and electronic products and systems;
IEC TC 114: Marine energy - Wave, tidal and other water current converters, also prepares technical specifications for ocean thermal energy conversion (OTEC). It prepares technical specifications that apply to some desalination technologies and seawater air conditioning (SWAC) systems;
IEC SC 121A: Low-voltage switchgear and controlgear;
ISO/IEC JTC 1/SC 6: Telecommunications and information exchange between systems;
IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
IECQ: IEC Quality Assessment System for Electronic Components [hazardous substances].

More information about SDG 6

Anchor placeholder #data

Publications
Projects

Reference	Language	TC/SC
IEC 60034-1:2022 Edition 14.0 (2022-02-14) Rotating electrical machines - Part 1: Rating and performance	EN-FR	TC 2
IEC 60034-2-1:2014 Edition 2.0 (2014-06-27) Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)	EN-FR	TC 2
IEC 60034-2-2:2010 Edition 1.0 (2010-03-16) Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1	EN-FR	TC 2
IEC 60034-2-3:2020 Edition 1.0 (2020-03-19) Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors	EN-FR	TC 2
IEC 60034-3:2020 Edition 7.0 (2020-05-26) Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators	EN-FR	TC 2
IEC 60034-4-1:2018 Edition 1.0 (2018-04-27) Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests	EN-FR	TC 2
IEC 60034-5:2020 Edition 5.0 (2020-04-29) Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification	EN-FR, EN	TC 2
IEC 60034-6:1991 Edition 2.0 (1991-10-01) Rotating electrical machines - Part 6: Methods of cooling (IC Code)	EN-FR, ES	TC 2
IEC 60034-7:2020 Edition 3.0 (2020-10-07) Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)	EN-FR	TC 2
IEC 60034-7:2020/COR1:2023 Edition 3.0 (2023-03-16) Corrigendum 1 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)	EN-FR	TC 2
IEC 60034-8:2007 Edition 3.0 (2007-06-22) Rotating electrical machines - Part 8: Terminal markings and direction of rotation	EN-FR, ES	TC 2
IEC 60034-8:2007/AMD1:2014 Edition 3.0 (2014-03-20) Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation	EN-FR, ES	TC 2
IEC 60034-9:2021 Edition 5.0 (2021-10-14) Rotating electrical machines - Part 9: Noise limits	EN-FR	TC 2
IEC 60034-11:2020 Edition 3.0 (2020-10-05) Rotating electrical machines - Part 11: Thermal protection	EN-FR	TC 2
IEC 60034-12:2016 Edition 3.0 (2016-11-23) Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors	EN-FR	TC 2
IEC 60034-14:2018 Edition 4.0 (2018-08-17) Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity	EN-FR	TC 2
IEC 60034-15:2009 Edition 3.0 (2009-03-17) Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines	EN-FR, ES	TC 2
IEC 60034-16-1:2011 Edition 2.0 (2011-05-25) Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions	EN-FR, ES	TC 2
IEC TR 60034-16-2:1991 Edition 1.0 (1991-02-15) Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies	EN-FR, ES	TC 2
IEC TS 60034-16-3:1996 Edition 1.0 (1996-02-14) Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance	EN-FR	TC 2
IEC 60034-18-21:2012 Edition 2.0 (2012-09-19) Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification	EN-FR	TC 2
IEC 60034-18-31:2012 Edition 2.0 (2012-06-25) Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines	EN-FR, ES	TC 2
IEC TS 60034-18-33:2010 Edition 2.0 (2010-07-22) Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses	EN	TC 2
IEC 60034-18-34:2012 Edition 1.0 (2012-06-14) Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems	EN-FR, ES	TC 2
IEC 60034-18-41:2014 Edition 1.0 (2014-03-06) Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests	EN-FR	TC 2
IEC 60034-18-41:2014/AMD1:2019 Edition 1.0 (2019-06-25) Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests	EN-FR	TC 2
IEC 60034-18-41:2014/AMD1:2019/COR1:2020 Edition 1.0 (2020-12-11) Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests	EN-FR	TC 2
IEC 60034-18-42:2017 Edition 1.0 (2017-02-07) Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests	EN-FR	TC 2
IEC 60034-18-42:2017/AMD1:2020 Edition 1.0 (2020-08-18) Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests	EN-FR	TC 2
IEC 60034-19:2014 Edition 2.0 (2014-09-25) Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies	EN-FR, ES	TC 2
IEC TS 60034-20-1:2002 Edition 1.0 (2002-01-18) Rotating electrical machines - Part 20-1: Control motors - Stepping motors	EN-FR	TC 2
IEC 60034-22:2009 Edition 2.0 (2009-10-28) Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets	EN-FR, ES	TC 2
IEC 60034-23:2019 Edition 1.0 (2019-01-24) Rotating electrical machines - Part 23: Repair, overhaul and reclamation	EN-FR	TC 2
IEC TS 60034-24:2009 Edition 1.0 (2009-09-16) Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide	EN-FR	TC 2
IEC TS 60034-25:2022 Edition 4.0 (2022-06-27) Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide	EN	TC 2
IEC 60034-26:2006 Edition 1.0 (2006-07-24) Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors	EN-FR, ES	TC 2
IEC 60034-26:2006/COR1:2014 Edition 1.0 (2014-09-03) Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors	EN-FR	TC 2
IEC 60034-27-1:2017 Edition 1.0 (2017-12-13) Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation	EN-FR	TC 2
IEC TS 60034-27-2:2012 Edition 1.0 (2012-03-22) Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines	EN	TC 2
IEC 60034-27-3:2015 Edition 1.0 (2015-12-16) Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines	EN-FR	TC 2
IEC 60034-27-4:2018 Edition 1.0 (2018-01-24) Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines	EN-FR	TC 2
IEC 60034-28:2012 Edition 2.0 (2012-12-13) Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors	EN-FR, ES	TC 2
IEC 60034-29:2008 Edition 1.0 (2008-03-11) Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise	EN-FR, ES	TC 2
IEC 60034-30-1:2014 Edition 1.0 (2014-03-06) Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)	EN-FR	TC 2
IEC TS 60034-30-2:2016 Edition 1.0 (2016-12-08) Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)	EN	TC 2
IEC TS 60034-31:2021 Edition 2.0 (2021-03-17) Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines	EN	TC 2
IEC TS 60034-32:2016 Edition 1.0 (2016-12-15) Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings	EN	TC 2
IEC 60050-102:2007 Edition 1.0 (2007-08-27) International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra	EN-FR	TC 1
IEC 60050-102:2007/AMD1:2017 Edition 1.0 (2017-08-31) Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra	EN-FR	TC 1
IEC 60050-102:2007/AMD2:2020 Edition 1.0 (2020-05-26) Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra	EN-FR	TC 1
IEC 60050-102:2007/AMD3:2021 Edition 1.0 (2021-03-23) Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra	EN-FR	TC 1
IEC 60050-103:2009 Edition 1.0 (2009-12-14) International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions	EN-FR, ES	TC 1
IEC 60050-103:2009/AMD1:2017 Edition 1.0 (2017-08-31) Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions	EN-FR	TC 1
IEC 60050-103:2009/AMD2:2019 Edition 1.0 (2019-10-17) Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions	EN-FR	TC 1
IEC 60050-103:2009/AMD4:2021 Edition 1.0 (2021-09-03) Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions	EN-FR	TC 1
IEC 60050-112:2010 Edition 1.0 (2010-01-27) International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units	EN-FR, ES	TC 1
IEC 60050-112:2010/AMD1:2019 Edition 1.0 (2019-01-30) Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units	EN-FR	TC 1
IEC 60050-112:2010/AMD2:2020 Edition 1.0 (2020-12-11) Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units	EN-FR	TC 1
IEC 60050-113:2011 Edition 1.0 (2011-04-11) International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology	EN-FR, ES	TC 1
IEC 60068-2-42:2003 Edition 3.0 (2003-05-22) Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections	EN-FR, ES	TC 48/SC 48B
IEC 60068-2-43:2003 Edition 2.0 (2003-05-23) Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections	EN-FR, ES	TC 48/SC 48B
IEC 60068-2-46:1982 Edition 1.0 (1982-01-01) Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections	EN-FR, RU	TC 48/SC 48B
IEC 60068-2-49:1983 Edition 1.0 (1983-01-01) Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections	EN-FR, RU	TC 48/SC 48B
IEC 60072-1:2022 Edition 7.0 (2022-03-30) Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080	EN-FR	TC 2
IEC 60072-2:1990 Edition 1.0 (1990-12-31) Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360	EN-FR	TC 2
IEC 60072-3:1994 Edition 1.0 (1994-03-11) Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50	EN-FR	TC 2
IEC 60079-0:2017 Edition 7.0 (2017-12-13) Explosive atmospheres - Part 0: Equipment - General requirements	EN-FR, ES	TC 31
IEC 60079-0:2017/ISH1:2019 Edition 7.0 (2019-04-23) Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements	EN-FR	TC 31
IEC 60079-0:2017/ISH2:2019 Edition 7.0 (2019-06-27) Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements	EN-FR	TC 31
IEC 60079-0:2017/COR1:2020 Edition 7.0 (2020-01-20) Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements	EN-FR	TC 31
IEC 60079-1:2014 Edition 7.0 (2014-06-27) Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"	EN-FR, ES	TC 31
IEC 60079-1:2014/ISH1:2020 Edition 7.0 (2020-05-28) Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"	EN	TC 31
IEC 60079-1:2014/COR1:2018 Edition 7.0 (2018-06-26) Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"	EN-FR	TC 31
IEC 60079-2:2014 Edition 6.0 (2014-07-21) Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"	EN-FR, ES	TC 31
IEC 60079-2:2014/COR1:2015 Edition 6.0 (2015-07-07) Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"	EN-FR	TC 31
IEC 60079-5:2015 Edition 4.0 (2015-02-17) Explosive atmospheres - Part 5: Equipment protection by powder filling "q"	EN-FR, ES	TC 31
IEC 60079-5:2015/AMD1:2022 Edition 4.0 (2022-05-12) Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"	EN-FR, EN	TC 31
IEC 60079-6:2015 Edition 4.0 (2015-02-20) Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"	EN-FR, ES	TC 31
IEC 60079-6:2015/AMD1:2020 Edition 4.0 (2020-02-24) Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"	EN-FR	TC 31
IEC 60079-7:2015 Edition 5.0 (2015-06-26) Explosive atmospheres - Part 7: Equipment protection by increased safety "e"	EN-FR, EN, ES	TC 31
IEC 60079-7:2015/ISH1:2016 Edition 5.0 (2016-09-15) Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"	EN-FR	TC 31
IEC 60079-7:2015/AMD1:2017 Edition 5.0 (2017-08-04) Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"	EN-FR, ES	TC 31
IEC 60079-10-1:2020 Edition 3.0 (2020-12-18) Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres	EN-FR, ES	TC 31/SC 31J
IEC 60079-10-2:2015 Edition 2.0 (2015-01-16) Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres	EN-FR, ES	TC 31/SC 31J
IEC 60079-11:2023 Edition 7.0 (2023-01-13) Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"	EN	TC 31/SC 31G
IEC 60079-13:2017 Edition 2.0 (2017-05-22) Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"	EN-FR, EN, ES	TC 31/SC 31J
IEC 60079-15:2017 Edition 5.0 (2017-12-08) Explosive atmospheres - Part 15: Equipment protection by type of protection "n"	EN-FR, ES	TC 31
IEC TR 60079-16:1990 Edition 1.0 (1990-05-15) Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses	EN-FR, ES	TC 31
IEC 60079-18:2014 Edition 4.0 (2014-12-12) Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"	EN-FR, ES	TC 31
IEC 60079-18:2014/COR1:2018 Edition 4.0 (2018-07-25) Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"	EN-FR	TC 31
IEC 60079-18:2014/AMD1:2017 Edition 4.0 (2017-08-24) Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"	EN-FR, ES	TC 31
IEC 60079-19:2019 Edition 4.0 (2019-10-18) Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation	EN-FR, ES	TC 31/SC 31J
IEC 60079-25:2020 Edition 3.0 (2020-06-26) Explosive atmospheres - Part 25: Intrinsically safe electrical systems	EN-FR	TC 31/SC 31G
IEC 60079-25:2020/COR1:2020 Edition 3.0 (2020-10-20) Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems	EN-FR	TC 31/SC 31G
IEC 60079-25:2020/COR2:2022 Edition 3.0 (2022-11-29) Corrigendum 2 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems	EN-FR	TC 31/SC 31G
IEC 60079-26:2021 Edition 4.0 (2021-02-25) Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection	EN-FR	TC 31
IEC 60079-28:2015 Edition 2.0 (2015-05-27) Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation	EN-FR, ES	TC 31
IEC 60079-28:2015/ISH1:2019 Edition 2.0 (2019-11-14) Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation	EN-FR	TC 31
IEC 60079-29-1:2016 Edition 2.0 (2016-07-21) Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases	EN-FR, EN, ES	TC 31
IEC 60079-29-1:2016/ISH1:2019 Edition 2.0 (2019-04-16) Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases	EN	TC 31
IEC 60079-29-1:2016/ISH2:2019 Edition 2.0 (2019-04-16) Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases	EN	TC 31
IEC 60079-29-1:2016/AMD1:2020 Edition 2.0 (2020-03-24) Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases	EN-FR, ES	TC 31
IEC 60079-29-2:2015 Edition 2.0 (2015-03-16) Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen	EN-FR, EN, ES	TC 31
IEC 60079-29-3:2014 Edition 1.0 (2014-03-27) Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems	EN-FR, ES	TC 31
IEC 60079-29-4:2009 Edition 1.0 (2009-11-10) Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases	EN-FR, ES	TC 31
IEC 60079-29-4:2009/COR1:2010 Edition 1.0 (2010-08-10) Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases	EN-FR	TC 31
IEC/IEEE 60079-30-1:2015 Edition 1.0 (2015-09-28) Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements	EN-FR, EN, ES	TC 31
IEC/IEEE 60079-30-2:2015 Edition 1.0 (2015-09-28) Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance	EN-FR, EN, ES	TC 31
IEC 60079-31:2022 Edition 3.0 (2022-01-17) Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"	EN-FR	TC 31
IEC TS 60079-32-1:2013 Edition 1.0 (2013-08-20) Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance	EN-FR, EN, RU	TC 31
IEC TS 60079-32-1:2013/AMD1:2017 Edition 1.0 (2017-03-16) Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance	EN-FR, EN	TC 31
IEC 60079-32-2:2015 Edition 1.0 (2015-02-25) Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests	EN-FR, ES, RU	TC 31
IEC 60079-33:2012 Edition 1.0 (2012-09-27) Explosive atmospheres - Part 33: Equipment protection by special protection 's'	EN-FR	TC 31
IEC 60079-35-1:2011 Edition 1.0 (2011-05-26) Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion	EN-FR, ES	TC 31
IEC 60079-35-2:2011 Edition 1.0 (2011-12-07) Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters	EN-FR, ES	TC 31
IEC TS 60079-39:2015 Edition 1.0 (2015-06-11) Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation	EN	TC 31/SC 31G
IEC TS 60079-39:2015/COR1:2020 Edition 1.0 (2020-10-20) Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation	EN	TC 31/SC 31G
IEC TS 60079-40:2015 Edition 1.0 (2015-02-05) Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems	EN	TC 31
IEC TS 60079-42:2019 Edition 1.0 (2019-04-17) Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment	EN-FR	TC 31
IEC TS 60079-43:2017 Edition 1.0 (2017-11-13) Explosive atmospheres - Part 43: Equipment in adverse service conditions	EN	TC 31
IEC TS 60079-46:2017 Edition 1.0 (2017-08-31) Explosive atmospheres - Part 46: Equipment assemblies	EN-FR, EN	TC 31
IEC TS 60079-47:2021 Edition 1.0 (2021-02-03) Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)	EN	TC 31/SC 31G
IEC 60086-6:2020 Edition 1.0 (2020-02-07) Primary batteries - Part 6: Guidance on environmental aspects	EN-FR	TC 35
IEC 60130-1:1988 Edition 2.0 (1988-11-10) Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.	EN-FR, RU	TC 48/SC 48B
IEC 60130-5:1966 Edition 1.0 (1966-01-01) Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts	EN-FR, RU	TC 48/SC 48B
IEC 60130-9:2011 Edition 4.0 (2011-02-23) Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment	EN-FR	TC 48/SC 48B
IEC 60130-10:1971 Edition 1.0 (1971-01-01) Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment	EN-FR, RU	TC 48/SC 48B
IEC 60130-12:1976 Edition 2.0 (1976-01-01) Connectors for frequencies below 3 MHz - Part 12: Link and test connectors	EN-FR, RU	TC 48/SC 48B
IEC 60130-17:1998 Edition 1.0 (1998-02-12) Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries	EN-FR	TC 48/SC 48B
IEC 60136:1986 Edition 2.0 (1986-06-30) Dimensions of brushes and brush-holders for electrical machinery	EN-FR	TC 2
IEC 60136:1986/AMD1:1995 Edition 2.0 (1995-04-26) Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery	EN-FR	TC 2
IEC 60146-1-1:2009 Edition 4.0 (2009-06-29) Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements	EN-FR	TC 22
IEC TR 60146-1-2:2019 Edition 5.0 (2019-10-22) Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines	EN	TC 22
IEC 60146-2:1999 Edition 2.0 (1999-11-18) Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters	EN-FR	TC 22
IEC 60276:2018 Edition 2.0 (2018-05-08) Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature	EN-FR	TC 2
IEC 60335-1:2020 Edition 6.0 (2020-09-02) Household and similar electrical appliances - Safety - Part 1: General requirements	EN-FR, EN	TC 61
IEC 60335-1:2020/ISH1:2021 Edition 6.0 (2021-11-22) Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 1: General requirements	EN	TC 61
IEC 60335-1:2020/COR1:2021 Edition 6.0 (2021-12-07) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 1: General requirements	EN	TC 61
IEC 60335-2-15:2012 Edition 6.0 (2012-11-06) Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids	EN-FR, ES	TC 61
IEC 60335-2-15:2012/AMD1:2016 Edition 6.0 (2016-04-08) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids	EN-FR, ES	TC 61
IEC 60335-2-15:2012/AMD2:2018 Edition 6.0 (2018-11-02) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids	EN-FR, ES	TC 61
IEC 60335-2-35:2012 Edition 5.0 (2012-11-07) Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters	EN-FR, ES	TC 61
IEC 60335-2-35:2012/AMD1:2016 Edition 5.0 (2016-11-08) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters	EN-FR, ES	TC 61
IEC 60335-2-35:2012/AMD2:2020 Edition 5.0 (2020-06-04) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters	EN-FR, ES	TC 61
IEC 60335-2-41:2012 Edition 4.0 (2012-12-11) Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps	EN-FR, ES	TC 61
IEC 60335-2-51:2019 Edition 4.0 (2019-04-15) Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations	EN-FR	TC 61
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV Edition 2.2 (2009-11-25) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters	EN-FR	TC 61
IEC 60335-2-73:2002+AMD1:2006 CSV Edition 2.1 (2006-03-21) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters	EN-FR, EN, FR	TC 61
IEC 60335-2-73:2002 Edition 2.0 (2002-10-09) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters	EN-FR, EN, ES	TC 61
IEC 60335-2-73:2002/AMD1:2006 Edition 2.0 (2006-01-23) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters	EN-FR, ES	TC 61
IEC 60335-2-73:2002/AMD2:2009 Edition 2.0 (2009-09-29) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters	EN-FR, ES	TC 61
IEC 60335-2-74:2021 Edition 3.0 (2021-09-03) Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters	EN-FR	TC 61
IEC 60335-2-108:2008 Edition 1.0 (2008-01-11) Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers	EN-FR, ES	TC 61
IEC 60335-2-109:2010 Edition 1.0 (2010-05-11) Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances	EN-FR, ES	TC 61
IEC 60335-2-109:2010/AMD1:2013 Edition 1.0 (2013-12-10) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances	EN-FR, ES	TC 61
IEC 60335-2-109:2010/AMD2:2016 Edition 1.0 (2016-11-16) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances	EN-FR, ES	TC 61
IEC 60352-1:1997 Edition 3.0 (1997-08-06) Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance	EN-FR, ES	TC 48/SC 48B
IEC 60352-1:1997/COR1:1998 Edition 3.0 (1998-10-07) Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-2:2006 Edition 2.0 (2006-02-23) Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-2:2006/AMD1:2013 Edition 2.0 (2013-06-27) Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-3:2020 Edition 2.0 (2020-04-09) Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-4:2020 Edition 2.0 (2020-06-11) Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-5:2020 Edition 5.0 (2020-07-22) Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance	EN-FR, EN	TC 48/SC 48B
IEC 60352-6:2022 Edition 2.0 (2022-12-07) Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60352-7:2020 Edition 2.0 (2020-12-16) Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance	EN-FR, EN	TC 48/SC 48B
IEC 60352-8:2011 Edition 1.0 (2011-02-10) Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance	EN-FR	TC 48/SC 48B
IEC 60356:1971 Edition 1.0 (1971-01-01) Dimensions for commutators and slip-rings	EN-FR	TC 2
IEC 60364-7-701:2019 Edition 3.0 (2019-10-14) Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower	EN-FR	TC 64
IEC 60364-7-702:2010 Edition 3.0 (2010-05-12) Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains	EN-FR	TC 64
IEC 60364-7-703:2004 Edition 2.0 (2004-10-26) Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters	EN-FR, ES	TC 64
IEC 60364-7-709:2007+AMD1:2012 CSV Edition 2.1 (2012-03-26) Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations	EN-FR	TC 64
IEC 60364-7-709:2007 Edition 2.0 (2007-05-10) Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations	EN-FR	TC 64
IEC 60364-7-709:2007/AMD1:2012 Edition 2.0 (2012-02-15) Amendment 1 - Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations	EN-FR	TC 64
IEC 60364-7-712:2017 Edition 2.0 (2017-04-10) Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems	EN-FR	TC 64
IEC 60364-7-718:2011 Edition 1.0 (2011-03-23) Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces	EN-FR	TC 64
IEC 60370:2017 Edition 2.0 (2017-12-13) Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods	EN-FR	TC 15
IEC 60371-1:2003 Edition 3.0 (2003-04-09) Specification for insulating materials based on mica - Part 1: Definitions and general requirements	EN-FR, ES	TC 15
IEC 60371-2:2004 Edition 3.0 (2004-06-23) Specification for insulating materials based on mica - Part 2: Methods of test	EN-FR	TC 15
IEC 60371-3-1:2006 Edition 3.0 (2006-06-13) Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials	EN-FR, EN, ES	TC 15
IEC 60371-3-2:2005 Edition 2.0 (2005-10-24) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper	EN-FR, EN	TC 15
IEC 60371-3-3:1983 Edition 1.0 (1983-01-01) Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment	EN-FR, ES	TC 15
IEC 60371-3-4:1992 Edition 1.0 (1992-11-20) Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder	EN-FR, ES	TC 15
IEC 60371-3-4:1992/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder	EN-FR, EN	TC 15
IEC 60371-3-5:2005 Edition 2.0 (2005-11-21) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)	EN-FR, EN	TC 15
IEC 60371-3-6:1992 Edition 1.0 (1992-11-30) Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder	EN-FR, ES	TC 15
IEC 60371-3-6:1992/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder	EN-FR, EN	TC 15
IEC 60371-3-7:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping	EN-FR, ES	TC 15
IEC 60371-3-7:1995/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping	EN-FR, EN	TC 15
IEC 60371-3-8:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables	EN-FR, ES	TC 15
IEC 60371-3-8:1995/AMD1:2007 Edition 1.0 (2007-04-11) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables	EN-FR, EN, ES	TC 15
IEC 60371-3-9:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite	EN-FR, ES	TC 15
IEC 60371-3-9:1995/AMD1:2007 Edition 1.0 (2007-04-11) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite	EN-FR, EN, ES	TC 15
IEC 60379:2023 Edition 4.0 (2023-02-07) Methods for measuring the performance of electric storage water heaters for household purposes	EN-FR	TC 59/SC 59C
IEC 60394-1:1972 Edition 1.0 (1972-01-01) Varnished fabrics for electrical purposes. Part 1: Definitions and general requirements	EN-FR, RU	TC 15
IEC 60394-2:1972 Edition 1.0 (1972-01-01) Varnished fabrics for electrical purposes. Part 2: Methods of test	EN-FR	TC 15
IEC 60394-3-1:1976 Edition 1.0 (1976-01-01) Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C	EN-FR, RU	TC 15
IEC 60394-3-2:1988 Edition 1.0 (1988-03-30) Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish	EN-FR	TC 15
IEC 60413:1972 Edition 1.0 (1972-01-01) Test procedures for determining physical properties of brush materials for electrical machines	EN-FR, RU	TC 2
IEC 60454-1:1992 Edition 2.0 (1992-05-31) Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements	EN-FR, ES	TC 15
IEC 60454-2:2007 Edition 3.0 (2007-06-21) Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 60454-2:2007/COR1:2009 Edition 3.0 (2009-12-17) Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test	EN	TC 15
IEC 60454-3-1:1998+AMD1:2001 CSV Edition 2.1 (2002-12-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive	EN-FR	TC 15
IEC 60454-3-1:1998 Edition 2.0 (1998-02-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive	EN-FR, ES	TC 15
IEC 60454-3-1:1998/AMD1:2001 Edition 2.0 (2001-05-28) Amendment 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive	EN-FR, ES	TC 15
IEC 60454-3-2:2006 Edition 3.0 (2006-01-23) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives	EN-FR, EN, ES	TC 15
IEC 60454-3-4:2007 Edition 3.0 (2007-06-05) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive	EN-FR, EN, ES	TC 15
IEC 60454-3-7:1998 Edition 2.0 (1998-03-16) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive	EN-FR, ES	TC 15
IEC 60454-3-8:2006 Edition 3.0 (2006-02-13) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre	EN-FR, EN	TC 15
IEC 60454-3-11:2007 Edition 2.0 (2007-05-10) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive	EN-FR, EN	TC 15
IEC 60454-3-12:2006 Edition 2.0 (2006-01-23) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive	EN-FR, EN, ES	TC 15
IEC 60454-3-14:2001 Edition 1.0 (2001-07-10) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive	EN-FR, ES	TC 15
IEC 60454-3-19:2003 Edition 1.0 (2003-05-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides	EN-FR, ES	TC 15
IEC 60455-1:1998 Edition 2.0 (1998-08-25) Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements	EN-FR, ES	TC 15
IEC 60455-2:2015 Edition 3.0 (2015-06-25) Resin based reactive compounds used for electrical insulation - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 60455-2-2:1984 Edition 1.0 (1984-01-01) Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2-2: Methods of test - Test methods for coating powders for electrical purposes	EN-FR, RU	TC 15
IEC 60455-3-1:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds	EN-FR, ES	TC 15
IEC 60455-3-2:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds	EN-FR, ES	TC 15
IEC 60455-3-3:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds	EN-FR, ES	TC 15
IEC 60455-3-4:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds	EN-FR, ES	TC 15
IEC 60455-3-5:2006 Edition 3.0 (2006-03-08) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins	EN-FR	TC 15
IEC 60455-3-8:2021 Edition 2.0 (2021-06-16) Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories	EN-FR	TC 15
IEC 60455-3-11:1988 Edition 1.0 (1988-04-15) Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders	EN-FR	TC 15
IEC 60464-1:1998 Edition 2.0 (1998-11-16) Varnishes used for electrical insulation - Part 1: Definitions and general requirements	EN-FR, ES	TC 15
IEC 60464-1:1998/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements	EN-FR, EN, ES	TC 15
IEC 60464-2:2001 Edition 2.0 (2001-07-31) Varnishes used for electrical insulation - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 60464-2:2001/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test	EN-FR, EN, ES	TC 15
IEC 60464-3-1:2001 Edition 2.0 (2001-07-10) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes	EN-FR, ES	TC 15
IEC 60464-3-1:2001/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes	EN-FR, EN, ES	TC 15
IEC 60464-3-2:2001 Edition 2.0 (2001-07-10) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes	EN-FR, ES	TC 15
IEC 60464-3-2:2001/AMD1:2006 Edition 2.0 (2006-04-27) Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes	EN-FR, EN, ES	TC 15
IEC 60512-1:2018 Edition 5.0 (2018-10-22) Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification	EN-FR	TC 48/SC 48B
IEC 60512-1-1:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination	EN-FR, ES	TC 48/SC 48B
IEC 60512-1-2:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass	EN-FR, ES	TC 48/SC 48B
IEC 60512-1-3:1997 Edition 1.0 (1997-07-01) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length	EN-FR, ES	TC 48/SC 48B
IEC 60512-1-4:1997 Edition 1.0 (1997-07-30) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)	EN-FR, ES	TC 48/SC 48B
IEC 60512-1-4:1997/COR1:2000 Edition 1.0 (2000-11-15) Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)	EN-FR	TC 48/SC 48B
IEC 60512-1-100:2012 Edition 3.0 (2012-02-22) Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications	EN-FR, ES	TC 48/SC 48B
IEC 60512-1-101:2015 Edition 1.0 (2015-05-05) Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification	EN-FR	TC 48/SC 48B
IEC 60512-2-1:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method	EN-FR, ES	TC 48/SC 48B
IEC 60512-2-2:2003 Edition 1.0 (2003-05-16) Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method	EN-FR, ES	TC 48/SC 48B
IEC 60512-2-3:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation	EN-FR, ES	TC 48/SC 48B
IEC 60512-2-5:2003 Edition 1.0 (2003-05-16) Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance	EN-FR, ES	TC 48/SC 48B
IEC 60512-2-6:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity	EN-FR, ES	TC 48/SC 48B
IEC 60512-3-1:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance	EN-FR, ES	TC 48/SC 48B
IEC 60512-4-1:2003 Edition 1.0 (2003-05-16) Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof	EN-FR, ES	TC 48/SC 48B
IEC 60512-4-2:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge	EN-FR, ES	TC 48/SC 48B
IEC 60512-4-3:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels	EN-FR, ES	TC 48/SC 48B
IEC 60512-5-1:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise	EN-FR, ES	TC 48/SC 48B
IEC 60512-5-2:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating	EN-FR, ES	TC 48/SC 48B
IEC 60512-6-1:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state	EN-FR, ES	TC 48/SC 48B
IEC 60512-6-2:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump	EN-FR, ES	TC 48/SC 48B
IEC 60512-6-3:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock	EN-FR, ES	TC 48/SC 48B
IEC 60512-6-4:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)	EN-FR, ES	TC 48/SC 48B
IEC 60512-6-5:1997 Edition 1.0 (1997-10-01) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration	EN-FR, ES	TC 48/SC 48B
IEC 60512-7-1:2010 Edition 1.0 (2010-03-17) Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)	EN-FR	TC 48/SC 48B
IEC 60512-7-2:2011 Edition 1.0 (2011-11-17) Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact	EN-FR	TC 48/SC 48B
IEC 60512-8-1:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse	EN-FR	TC 48/SC 48B
IEC 60512-8-2:2011 Edition 1.0 (2011-04-07) Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial	EN-FR	TC 48/SC 48B
IEC 60512-8-3:2018 Edition 2.0 (2018-01-12) Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever	EN-FR	TC 48/SC 48B
IEC 60512-9-1:2010 Edition 1.0 (2010-03-17) Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation	EN-FR	TC 48/SC 48B
IEC 60512-9-2:2011 Edition 1.0 (2011-11-28) Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature	EN-FR	TC 48/SC 48B
IEC 60512-9-3:2011 Edition 2.0 (2011-06-22) Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load	EN-FR	TC 48/SC 48B
IEC 60512-9-4:2011 Edition 1.0 (2011-04-07) Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)	EN-FR	TC 48/SC 48B
IEC 60512-9-5:2020 Edition 2.0 (2020-06-09) Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic	EN-FR	TC 48/SC 48B
IEC 60512-10-4:2003 Edition 2.0 (2003-08-11) Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-1:2019 Edition 2.0 (2019-05-16) Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence	EN-FR	TC 48/SC 48B
IEC 60512-11-2:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-3:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-4:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-5:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-6:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-7:2003 Edition 2.0 (2003-05-22) Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-8:1995 Edition 1.0 (1995-11-16) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-9:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-10:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-11:2002 Edition 1.0 (2002-02-22) Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-12:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-13:2002 Edition 1.0 (2002-02-21) Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections	EN-FR, ES	TC 48/SC 48B
IEC 60512-11-14:2003 Edition 2.0 (2003-07-24) Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test	EN-FR, EN, ES	TC 48/SC 48B
IEC 60512-12-1:2006 Edition 1.0 (2006-03-23) Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-2:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-3:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-4:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-5:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-6:1996 Edition 1.0 (1996-01-30) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering	EN-FR, ES	TC 48/SC 48B
IEC 60512-12-7:2001 Edition 1.0 (2001-01-24) Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method	EN-FR, ES	TC 48/SC 48B
IEC 60512-13-1:2006 Edition 2.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces	EN-FR, ES	TC 48/SC 48B
IEC 60512-13-2:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces	EN-FR, ES	TC 48/SC 48B
IEC 60512-13-5:2006 Edition 1.0 (2006-02-13) Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method	EN-FR, ES	TC 48/SC 48B
IEC 60512-14-2:2006 Edition 1.0 (2006-03-23) Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage	EN-FR, ES	TC 48/SC 48B
IEC 60512-14-4:2006 Edition 1.0 (2006-03-23) Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof	EN-FR, ES	TC 48/SC 48B
IEC 60512-14-5:2006 Edition 1.0 (2006-03-23) Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure	EN-FR, ES	TC 48/SC 48B
IEC 60512-14-6:2006 Edition 1.0 (2006-03-23) Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing	EN-FR, ES	TC 48/SC 48B
IEC 60512-14-7:1997 Edition 1.0 (1997-10-30) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water	EN-FR, ES	TC 48/SC 48B
IEC 60512-15-1:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert	EN-FR	TC 48/SC 48B
IEC 60512-15-2:2018 Edition 2.0 (2018-01-12) Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)	EN-FR	TC 48/SC 48B
IEC 60512-15-3:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)	EN-FR	TC 48/SC 48B
IEC 60512-15-4:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force	EN-FR	TC 48/SC 48B
IEC 60512-15-5:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation	EN-FR	TC 48/SC 48B
IEC 60512-15-6:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices	EN-FR	TC 48/SC 48B
IEC 60512-15-7:2008 Edition 1.0 (2008-05-09) Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment	EN-FR	TC 48/SC 48B
IEC 60512-15-8:1995 Edition 1.0 (1995-11-16) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application	EN-FR, ES	TC 48/SC 48B
IEC 60512-16-1:2008 Edition 1.0 (2008-06-11) Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage	EN-FR	TC 48/SC 48B
IEC 60512-16-2:2008 Edition 1.0 (2008-06-11) Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry	EN-FR	TC 48/SC 48B
IEC 60512-16-3:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength	EN-FR	TC 48/SC 48B
IEC 60512-16-4:2008 Edition 1.0 (2008-06-11) Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)	EN-FR	TC 48/SC 48B
IEC 60512-16-5:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)	EN-FR	TC 48/SC 48B
IEC 60512-16-6:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations	EN-FR	TC 48/SC 48B
IEC 60512-16-7:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping	EN-FR	TC 48/SC 48B
IEC 60512-16-8:2008 Edition 1.0 (2008-05-14) Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)	EN-FR	TC 48/SC 48B
IEC 60512-16-9:2008 Edition 1.0 (2008-05-14) Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force	EN-FR	TC 48/SC 48B
IEC 60512-16-11:2008 Edition 1.0 (2008-05-14) Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections	EN-FR	TC 48/SC 48B
IEC 60512-16-13:2008 Edition 1.0 (2008-05-14) Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections	EN-FR	TC 48/SC 48B
IEC 60512-16-14:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs	EN-FR	TC 48/SC 48B
IEC 60512-16-16:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs	EN-FR	TC 48/SC 48B
IEC 60512-16-17:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs	EN-FR	TC 48/SC 48B
IEC 60512-16-18:2008 Edition 1.0 (2008-05-14) Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation	EN-FR	TC 48/SC 48B
IEC 60512-16-20:1996 Edition 1.0 (1996-07-31) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)	EN-FR, ES	TC 48/SC 48B
IEC 60512-16-21:2012 Edition 1.0 (2012-05-07) Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses	EN-FR	TC 48/SC 48B
IEC 60512-17-1:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness	EN-FR	TC 48/SC 48B
IEC 60512-17-2:2011 Edition 1.0 (2011-04-07) Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation	EN-FR	TC 48/SC 48B
IEC 60512-17-3:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)	EN-FR	TC 48/SC 48B
IEC 60512-17-4:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion	EN-FR	TC 48/SC 48B
IEC 60512-19-1:2010 Edition 1.0 (2010-03-24) Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels	EN-FR	TC 48/SC 48B
IEC 60512-19-3:1997 Edition 1.0 (1997-07-01) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance	EN-FR, ES	TC 48/SC 48B
IEC 60512-20-1:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame	EN-FR	TC 48/SC 48B
IEC 60512-20-2:2000 Edition 1.0 (2000-04-13) Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness	EN-FR, ES	TC 48/SC 48B
IEC 60512-20-3:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire	EN-FR	TC 48/SC 48B
IEC 60512-21-1:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance	EN-FR	TC 48/SC 48B
IEC 60512-22-1:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance	EN-FR	TC 48/SC 48B
IEC 60512-23-2:2010 Edition 1.0 (2010-06-10) Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters	EN-FR	TC 48/SC 48B
IEC 60512-23-3:2018 Edition 2.0 (2018-12-14) Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method	EN-FR	TC 48/SC 48B
IEC 60512-23-4:2001 Edition 1.0 (2001-06-19) Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain	EN-FR, ES	TC 48/SC 48B
IEC 60512-23-7:2005 Edition 1.0 (2005-01-27) Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors	EN-FR, ES	TC 48/SC 48B
IEC 60512-24-1:2010 Edition 1.0 (2010-03-24) Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism	EN-FR	TC 48/SC 48B
IEC 60512-25-1:2001 Edition 1.0 (2001-07-26) Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-2:2002 Edition 1.0 (2002-03-12) Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-3:2001 Edition 1.0 (2001-07-26) Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-4:2001 Edition 1.0 (2001-07-26) Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-5:2004 Edition 1.0 (2004-07-15) Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-6:2004 Edition 1.0 (2004-05-26) Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-7:2004 Edition 1.0 (2004-12-15) Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)	EN-FR, ES	TC 48/SC 48B
IEC 60512-25-9:2008 Edition 1.0 (2008-08-28) Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk	EN-FR	TC 48/SC 48B
IEC 60512-26-100:2008+AMD1:2011 CSV Edition 1.1 (2011-05-25) Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g	EN-FR	TC 48/SC 48B
IEC 60512-26-100:2008 Edition 1.0 (2008-07-21) Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g	EN-FR	TC 48/SC 48B
IEC 60512-26-100:2008/AMD1:2011 Edition 1.0 (2011-03-14) Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g	EN-FR	TC 48/SC 48B
IEC 60512-27-100:2011 Edition 1.0 (2011-12-07) Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g	EN-FR	TC 48/SC 48B
IEC 60512-28-100:2019 Edition 2.0 (2019-11-15) Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g	EN-FR	TC 48/SC 48B
IEC 60512-29-100:2015 Edition 1.0 (2015-03-05) Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g	EN-FR	TC 48/SC 48B
IEC 60512-99-001:2012 Edition 1.0 (2012-08-13) Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power	EN-FR	TC 48/SC 48B
IEC 60512-99-002:2022 Edition 2.0 (2022-01-28) Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load	EN-FR	TC 48/SC 48B
IEC 60554-1:1977 Edition 1.0 (1977-01-01) Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements	EN-FR, RU	TC 15
IEC 60554-1:1977/AMD1:1983 Edition 1.0 (1983-01-01) Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements	EN-FR	TC 15
IEC 60554-2:2001 Edition 2.0 (2001-11-08) Cellulosic papers for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 60554-3-1:1979 Edition 1.0 (1979-01-01) Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper	EN-FR, RU	TC 15
IEC 60554-3-2:1983 Edition 1.0 (1983-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper	EN-FR	TC 15
IEC 60554-3-3:1980 Edition 1.0 (1980-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper	EN-FR	TC 15
IEC 60554-3-4:1979 Edition 1.0 (1979-01-01) Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper	EN-FR, RU	TC 15
IEC 60554-3-5:1984 Edition 1.0 (1984-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers	EN-FR	TC 15
IEC 60560:1977 Edition 1.0 (1977-01-01) Definitions and terminology of brush-holders for electrical machines	EN-FR, RU	TC 2
IEC 60598-2-22:2021 Edition 5.0 (2021-12-06) Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting	EN-FR	TC 34/SC 34D
IEC 60603-1:1991 Edition 2.0 (1991-06-28) Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality	EN-FR	TC 48/SC 48B
IEC 60603-1:1991/AMD1:1992 Edition 2.0 (1992-06-15) Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality	EN-FR	TC 48/SC 48B
IEC 60603-2:1995 Edition 3.0 (1995-09-22) Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features	EN-FR	TC 48/SC 48B
IEC 60603-2:1995/AMD1:2000 Edition 3.0 (2000-08-18) Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features	EN-FR	TC 48/SC 48B
IEC 60603-3:1987 Edition 1.0 (1987-01-01) Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing	EN-FR, ES, RU	TC 48/SC 48B
IEC 60603-4:1987 Edition 1.0 (1987-03-15) Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing	EN-FR, ES, RU	TC 48/SC 48B
IEC 60603-5:1987 Edition 1.0 (1987-01-01) Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing	EN-FR, ES, RU	TC 48/SC 48B
IEC 60603-6:1987 Edition 1.0 (1987-01-01) Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness	EN-FR, ES, RU	TC 48/SC 48B
IEC 60603-7:2020 Edition 4.0 (2020-10-09) Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors	EN-FR	TC 48/SC 48B
IEC 60603-7-1:2011 Edition 3.0 (2011-04-07) Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors	EN-FR	TC 48/SC 48B
IEC 60603-7-2:2010 Edition 2.0 (2010-04-26) Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-3:2010 Edition 2.0 (2010-04-26) Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-4:2010 Edition 2.0 (2010-04-26) Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-5:2010 Edition 2.0 (2010-04-26) Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-7:2010 Edition 3.0 (2010-05-31) Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-41:2010 Edition 1.0 (2010-03-10) Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-51:2010 Edition 1.0 (2010-03-10) Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-71:2010 Edition 1.0 (2010-06-28) Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-81:2015 Edition 1.0 (2015-12-16) Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-81:2015/COR1:2017 Edition 1.0 (2017-06-30) Corrigendum 1 - Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz	EN-FR	TC 48/SC 48B
IEC 60603-7-82:2016 Edition 1.0 (2016-08-25) Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz	EN-FR	TC 48/SC 48B
IEC 60603-8:1990 Edition 1.0 (1990-12-01) Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm	EN-FR, ES	TC 48/SC 48B
IEC 60603-11:1992 Edition 1.0 (1992-03-15) Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)	EN-FR	TC 48/SC 48B
IEC 60603-12:1992 Edition 1.0 (1992-06-25) Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits	EN-FR	TC 48/SC 48B
IEC 60603-13:1995 Edition 1.0 (1995-01-25) Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)	EN-FR	TC 48/SC 48B
IEC 60603-14:1998 Edition 1.0 (1998-02-26) Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment	EN-FR	TC 48/SC 48B
IEC 60626-1:2009 Edition 3.0 (2009-08-31) Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements	EN-FR	TC 15
IEC 60626-2:2009 Edition 3.0 (2009-09-29) Combined flexible materials for electrical insulation - Part 2: Methods of test	EN-FR	TC 15
IEC 60626-3:2008 Edition 3.0 (2008-07-21) Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials	EN-FR	TC 15
IEC 60626-3:2008/AMD1:2012 Edition 3.0 (2012-07-17) Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials	EN-FR	TC 15
IEC 60641-1:2007 Edition 2.0 (2007-11-14) Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements	EN-FR, EN	TC 15
IEC 60641-2:2004 Edition 2.0 (2004-06-23) Pressboard and presspaper for electrical purposes - Part 2: Methods of tests	EN-FR, EN, FR	TC 15
IEC 60641-3-1:2008 Edition 2.0 (2008-07-21) Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1	EN-FR	TC 15
IEC 60641-3-2:2007 Edition 2.0 (2007-11-14) Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1	EN-FR, EN	TC 15
IEC 60664-1:2020 Edition 3.0 (2020-05-26) Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests	EN-FR, ES	TC 109
IEC 60664-1:2020/COR1:2020 Edition 3.0 (2020-10-27) Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests	EN-FR	TC 109
IEC TR 60664-2-1:2011 Edition 2.0 (2011-01-31) Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing	EN-FR	TC 109
IEC TR 60664-2-1:2011/COR1:2011 Edition 2.0 (2011-10-24) Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing	EN-FR	TC 109
IEC TR 60664-2-2:2002 Edition 1.0 (2002-01-22) Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide	EN	TC 109
IEC 60664-3:2016 Edition 3.0 (2016-11-04) Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution	EN-FR, ES	TC 109
IEC 60664-4:2005 Edition 2.0 (2005-09-15) Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress	EN-FR, ES	TC 109
IEC 60667-1:2020 Edition 2.0 (2020-04-09) Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements	EN-FR	TC 15
IEC 60667-2:2020 Edition 2.0 (2020-05-13) Vulcanized fibre for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 60667-3-1:2020 Edition 2.0 (2020-03-25) Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets	EN-FR	TC 15
IEC 60672-1:1995 Edition 2.0 (1995-06-27) Ceramic and glass insulating materials - Part 1: Definitions and classification	EN-FR, EN, FR, ES	TC 15
IEC 60672-2:1999 Edition 2.0 (1999-12-22) Ceramic and glass insulating materials - Part 2: Methods of test	EN-FR, EN, FR, ES	TC 15
IEC 60672-3:1997 Edition 2.0 (1997-10-17) Ceramic and glass-insulating materials - Part 3: Specifications for individual materials	EN-FR, EN, FR, ES	TC 15
IEC 60674-1:1980 Edition 1.0 (1980-01-01) Specification for plastic films for electrical purposes. Part 1: Definitions and general requirements	EN-FR, ES	TC 15
IEC 60674-2:2016 Edition 2.0 (2016-11-18) Specification for plastic films for electrical purposes - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 60674-2:2016/COR1:2017 Edition 2.0 (2017-12-19) Corrigendum 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test	EN	TC 15
IEC 60674-2:2016/AMD1:2019 Edition 2.0 (2019-01-24) Amendment 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 60674-3-1:2021 Edition 2.0 (2021-08-25) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors	EN-FR	TC 15
IEC 60674-3-2:2019 Edition 2.0 (2019-01-16) Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation	EN-FR	TC 15
IEC 60674-3-3:1992 Edition 1.0 (1992-04-30) Specification for plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Requirements forpolycarbonate (PC) films used for electrical insulation	EN-FR, ES	TC 15
IEC 60674-3-4:2022 Edition 2.0 (2022-06-22) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation	EN-FR	TC 15
IEC 60674-3-7:1992 Edition 1.0 (1992-04-30) Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation	EN-FR, ES	TC 15
IEC 60674-3-8:2011 Edition 1.0 (2011-07-13) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation	EN-FR	TC 15
IEC 60674-3-8:2011/AMD1:2016 Edition 1.0 (2016-11-22) Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation	EN-FR	TC 15
IEC 60684-1:2003 Edition 2.0 (2003-04-28) Flexible insulating sleeving - Part 1: Definitions and general requirements	EN-FR, ES	TC 15
IEC 60684-2:2011 Edition 3.0 (2011-08-10) Flexible insulating sleeving - Part 2: Methods of test	EN-FR	TC 15
IEC 60684-3-100:2001 Edition 2.0 (2001-07-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving	EN-FR, ES	TC 15
IEC 60684-3-116:2010 Edition 3.0 (2010-06-16) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose	EN-FR	TC 15
IEC 60684-3-121:2001 Edition 2.0 (2001-07-18) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving	EN-FR, ES	TC 15
IEC 60684-3-136:1997 Edition 1.0 (1997-12-22) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose	EN-FR, ES	TC 15
IEC 60684-3-136:1997/COR1:1999 Edition 1.0 (1999-02-19) Corrigendum 1 - Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose	EN-FR	TC 15
IEC 60684-3-145:2001 Edition 1.0 (2001-07-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving	EN-FR, ES	TC 15
IEC 60684-3-151:1998 Edition 1.0 (1998-06-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose	EN-FR, ES	TC 15
IEC 60684-3-165:2004 Edition 1.0 (2004-05-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving	EN-FR, ES	TC 15
IEC 60684-3-205:2011 Edition 1.0 (2011-06-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1	EN-FR	TC 15
IEC 60684-3-209:2010 Edition 3.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded	EN-FR	TC 15
IEC 60684-3-211:2007 Edition 3.0 (2007-02-15) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1	EN-FR, EN, ES	TC 15
IEC 60684-3-212:2005 Edition 2.0 (2005-11-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings	EN-FR, EN	TC 15
IEC 60684-3-214:2019 Edition 4.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall	EN-FR	TC 15
IEC 60684-3-216:2019 Edition 2.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving	EN-FR	TC 15
IEC 60684-3-228:2004 Edition 2.0 (2004-05-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1	EN-FR, ES	TC 15
IEC 60684-3-229:2003 Edition 1.0 (2003-02-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1	EN-FR, ES	TC 15
IEC 60684-3-233:2006 Edition 2.0 (2006-01-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1	EN	TC 15
IEC 60684-3-240:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving	EN-FR, ES	TC 15
IEC 60684-3-246:2007 Edition 3.0 (2007-02-15) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded	EN-FR, EN, ES	TC 15
IEC 60684-3-247:2019 Edition 2.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall	EN-FR	TC 15
IEC 60684-3-248:2007 Edition 1.0 (2007-02-16) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1	EN-FR, EN	TC 15
IEC 60684-3-271:2011 Edition 3.0 (2011-06-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1	EN-FR	TC 15
IEC 60684-3-280:2019 Edition 2.0 (2019-08-20) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking	EN-FR	TC 15
IEC 60684-3-281:2010 Edition 1.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive	EN-FR	TC 15
IEC 60684-3-282:2010 Edition 1.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control	EN-FR	TC 15
IEC 60684-3-283:2019 Edition 2.0 (2019-08-20) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation	EN-FR	TC 15
IEC 60684-3-284:2014 Edition 1.0 (2014-10-23) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications	EN-FR, EN	TC 15
IEC 60684-3-285:2014 Edition 1.0 (2014-10-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation	EN-FR, EN	TC 15
IEC 60684-3-300:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated	EN-FR, ES	TC 15
IEC 60684-3-320:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated	EN-FR, ES	TC 15
IEC 60684-3-340:2003 Edition 2.0 (2003-04-29) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving	EN-FR, ES	TC 15
IEC 60684-3-343:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated	EN-FR, ES	TC 15
IEC 60684-3-400:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating	EN-FR, ES	TC 15
IEC 60684-3-403:2002 Edition 2.0 (2002-05-17) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating	EN-FR, ES	TC 15
IEC 60684-3-406:2003 Edition 2.0 (2003-07-29) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating	EN-FR, ES	TC 15
IEC 60684-3-409:1999 Edition 1.0 (1999-06-30) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating	EN-FR, ES	TC 15
IEC 60684-3-420:2002 Edition 2.0 (2002-05-17) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating	EN-FR, ES	TC 15
IEC TS 60695-11-21:2005 Edition 1.0 (2005-05-04) Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials	EN-FR	TC 89
IEC 60715:2017 Edition 2.0 (2017-07-28) Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories	EN-FR	TC 121/SC 121A
IEC 60763-1:2010 Edition 2.0 (2010-08-06) Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements	EN-FR	TC 15
IEC 60763-2:2007 Edition 2.0 (2007-02-15) Specification for laminated pressboard - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 60763-3-1:2010 Edition 2.0 (2010-08-06) Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2	EN-FR	TC 15
IEC 60773:2021 Edition 2.0 (2021-04-07) Rotating electrical machines - Test methods and apparatus for the measurement of the operational characteristics of brushes	EN-FR	TC 2
IEC TR 60778:1984 Edition 1.0 (1984-01-01) Brush-holders for slip-rings, Group R - type RA	EN-FR	TC 2
IEC 60807-1:1991 Edition 2.0 (1991-10-15) Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality	EN-FR	TC 48/SC 48B
IEC 60807-2:1992 Edition 2.0 (1992-11-13) Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types	EN-FR	TC 48/SC 48B
IEC 60807-2:1992/AMD1:1996 Edition 2.0 (1996-01-30) Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types	EN-FR	TC 48/SC 48B
IEC 60807-3:1990 Edition 1.0 (1990-07-18) Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction	EN-FR, RU	TC 48/SC 48B
IEC 60807-6:1988 Edition 1.0 (1988-05-15) Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types	EN-FR, RU	TC 48/SC 48B
IEC 60807-7:1991 Edition 1.0 (1991-12-20) Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality	EN-FR	TC 48/SC 48B
IEC 60807-8:1992 Edition 1.0 (1992-01-31) Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen	EN-FR	TC 48/SC 48B
IEC 60807-9:1993 Edition 1.0 (1993-04-20) Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors	EN-FR	TC 48/SC 48B
IEC 60819-1:2009 Edition 3.0 (2009-09-29) Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements	EN-FR	TC 15
IEC 60819-2:2001 Edition 1.0 (2001-07-04) Non-cellulosic papers for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 60819-3-1:2001 Edition 1.0 (2001-07-05) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper	EN-FR, ES	TC 15
IEC 60819-3-2:2001 Edition 1.0 (2001-07-04) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper	EN-FR, ES	TC 15
IEC 60819-3-3:2011 Edition 3.0 (2011-09-13) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers	EN-FR	TC 15
IEC 60819-3-4:2013 Edition 2.0 (2013-12-12) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles	EN-FR	TC 15
IEC TR 60890:2022 Edition 3.0 (2022-09-29) A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation	EN-FR, EN	TC 121/SC 121B
IEC 60893-1:2004 Edition 2.0 (2004-01-26) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements	EN-FR, ES	TC 15
IEC 60893-2:2003 Edition 2.0 (2003-06-24) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 60893-3-1:2012 Edition 3.0 (2012-07-24) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets	EN-FR	TC 15
IEC 60893-3-2:2003+AMD1:2011 CSV Edition 2.1 (2011-11-28) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins	EN-FR	TC 15
IEC 60893-3-2:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins	EN-FR, ES	TC 15
IEC 60893-3-2:2003/AMD1:2011 Edition 2.0 (2011-05-27) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins	EN-FR, ES	TC 15
IEC 60893-3-3:2003+AMD1:2011 CSV Edition 2.1 (2012-01-27) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins	EN-FR	TC 15
IEC 60893-3-3:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins	EN-FR, ES	TC 15
IEC 60893-3-3:2003/AMD1:2011 Edition 2.0 (2011-11-28) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins	EN-FR, ES	TC 15
IEC 60893-3-4:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins	EN-FR, ES	TC 15
IEC 60893-3-4:2003/COR1:2014 Edition 2.0 (2014-03-19) Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins	EN-FR	TC 15
IEC 60893-3-4:2003/AMD1:2012 Edition 2.0 (2012-10-12) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins	EN-FR, ES	TC 15
IEC 60893-3-5:2003+AMD1:2009 CSV Edition 2.1 (2009-10-13) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins	EN-FR	TC 15
IEC 60893-3-5:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins	EN-FR, ES	TC 15
IEC 60893-3-5:2003/AMD1:2009 Edition 2.0 (2009-08-28) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins	EN-FR, ES	TC 15
IEC 60893-3-6:2003+AMD1:2009 CSV Edition 2.1 (2009-11-10) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins	EN-FR	TC 15
IEC 60893-3-6:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins	EN-FR, ES	TC 15
IEC 60893-3-6:2003/AMD1:2009 Edition 2.0 (2009-09-29) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins	EN-FR, ES	TC 15
IEC 60893-3-6:2003/AMD2:2017 Edition 2.0 (2017-09-15) Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins	EN-FR	TC 15
IEC 60893-3-7:2003+AMD1:2009 CSV Edition 2.1 (2009-11-10) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins	EN-FR	TC 15
IEC 60893-3-7:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins	EN-FR, ES	TC 15
IEC 60893-3-7:2003/AMD1:2009 Edition 2.0 (2009-09-29) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins	EN-FR, ES	TC 15
IEC TR 60893-4:2014 Edition 2.0 (2014-10-29) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values	EN	TC 15
IEC TR 60893-4:2014/AMD1:2017 Edition 2.0 (2017-09-22) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values	EN	TC 15
IEC 60947-1:2020 Edition 6.0 (2020-04-22) Low-voltage switchgear and controlgear - Part 1: General rules	EN-FR, ES	TC 121/SC 121A
IEC 60947-1:2020/COR1:2022 Edition 6.0 (2022-12-20) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 1: General rules	EN-FR	TC 121/SC 121A
IEC 60947-2:2016 Edition 5.0 (2016-06-07) Low-voltage switchgear and controlgear - Part 2: Circuit-breakers	EN-FR, ES	TC 121/SC 121A
IEC 60947-2:2016/COR1:2016 Edition 5.0 (2016-11-18) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers	EN-FR	TC 121/SC 121A
IEC 60947-2:2016/AMD1:2019 Edition 5.0 (2019-07-08) Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers	EN-FR, ES	TC 121/SC 121A
IEC 60947-3:2020 Edition 4.0 (2020-04-22) Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units	EN-FR, ES	TC 121/SC 121A
IEC 60947-3:2020/COR1:2021 Edition 4.0 (2021-10-22) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units	EN-FR	TC 121/SC 121A
IEC 60947-4-1:2018 Edition 4.0 (2018-10-25) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters	EN-FR, ES	TC 121/SC 121A
IEC 60947-4-1:2018/ISH1:2020 Edition 4.0 (2020-03-13) Interpretation sheet 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters	EN-FR	TC 121/SC 121A
IEC 60947-4-1:2018/COR1:2020 Edition 4.0 (2020-04-22) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters	EN-FR	TC 121/SC 121A
IEC 60947-4-1:2018/COR2:2021 Edition 4.0 (2021-04-20) Corrigendum 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters	EN-FR	TC 121/SC 121A
IEC 60947-4-2:2020 Edition 4.0 (2020-06-26) Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters	EN-FR	TC 121/SC 121A
IEC 60947-4-3:2020 Edition 3.0 (2020-07-14) Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads	EN	TC 121/SC 121A
IEC 60947-5-1:2016 Edition 4.0 (2016-05-25) Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-1:2016/COR1:2016 Edition 4.0 (2016-07-15) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices	EN-FR	TC 121/SC 121A
IEC 60947-5-1:2016/COR2:2020 Edition 4.0 (2020-04-22) Corrigendum 2 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices	EN-FR	TC 121/SC 121A
IEC 60947-5-2:2019 Edition 4.0 (2019-10-18) Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-3:2013 Edition 2.0 (2013-08-06) Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-4:2002 Edition 2.0 (2002-10-15) Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-4:2002/AMD1:2019 Edition 2.0 (2019-05-22) Amendment 1 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-5:1997+AMD1:2005 CSV Edition 1.1 (2005-04-06) Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function	EN-FR	TC 121/SC 121A
IEC 60947-5-5:1997 Edition 1.0 (1997-11-26) Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-5:1997/AMD1:2005 Edition 1.0 (2005-01-17) Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-5:1997/AMD1:2005/COR1:2007 Edition 1.0 (2007-07-25) Corrigendum 1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function	EN-FR	TC 121/SC 121A
IEC 60947-5-5:1997/AMD2:2016 Edition 1.0 (2016-02-29) Amendment 2 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-6:1999 Edition 1.0 (1999-12-17) Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-7:2003 Edition 1.0 (2003-06-11) Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-8:2020 Edition 2.0 (2020-08-12) Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches	EN-FR, ES	TC 121/SC 121A
IEC 60947-5-9:2006 Edition 1.0 (2006-12-08) Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches	EN-FR, ES	TC 121/SC 121A
IEC 60947-6-1:2021 Edition 3.0 (2021-03-16) Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment	EN-FR	TC 121/SC 121A
IEC 60947-6-2:2020 Edition 3.0 (2020-12-15) Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)	EN-FR	TC 121/SC 121A
IEC 60947-6-2:2020/COR1:2021 Edition 3.0 (2021-12-07) Corrigendum 1 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)	EN-FR	TC 121/SC 121A
IEC 60947-7-1:2009 Edition 3.0 (2009-04-20) Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors	EN-FR, ES	TC 121/SC 121A
IEC 60947-7-2:2009 Edition 3.0 (2009-04-20) Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors	EN-FR, ES	TC 121/SC 121A
IEC 60947-7-3:2009 Edition 2.0 (2009-04-20) Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks	EN-FR, ES	TC 121/SC 121A
IEC 60947-7-4:2019 Edition 2.0 (2019-01-18) Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors	EN-FR, ES	TC 121/SC 121A
IEC 60947-8:2021 Edition 2.0 (2021-07-28) Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines	EN-FR	TC 121/SC 121A
IEC 60947-9-1:2019 Edition 1.0 (2019-01-16) Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices	EN-FR, ES	TC 121/SC 121A
IEC 60999-2:2003 Edition 2.0 (2003-05-09) Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)	EN-FR, ES	TC 121/SC 121A
IEC TR 61015:1990 Edition 1.0 (1990-03-31) Brush-holders for electrical machines. Guide to the measurement of the static thrust applied to brushes	EN-FR	TC 2
IEC 61033:1991 Edition 1.0 (1991-05-16) Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate	EN-FR	TC 15
IEC 61033:1991/AMD1:2006 Edition 1.0 (2006-04-27) Amendment 1 - Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate	EN-FR	TC 15
IEC 61061-1:2006 Edition 3.0 (2006-10-25) Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements	EN-FR, EN	TC 15
IEC 61061-2:1992+AMD1:2001 CSV Edition 1.1 (2001-10-25) Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 61061-2:1992 Edition 1.0 (1992-09-15) Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 61061-2:1992/AMD1:2001 Edition 1.0 (2001-07-10) Amendment 1 - Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 61061-3-1:1998 Edition 1.0 (1998-07-24) Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Sheets produced from beech veneer	EN-FR	TC 15
IEC 61061-3-2:2001 Edition 1.0 (2001-07-10) Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer	EN-FR	TC 15
IEC 61067-1:1991 Edition 1.0 (1991-06-15) Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements	EN-FR, ES	TC 15
IEC 61067-2:1992 Edition 1.0 (1992-05-31) Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 61067-3-1:1995 Edition 1.0 (1995-04-13) Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes	EN-FR, ES	TC 15
IEC 61068-1:1991 Edition 1.0 (1991-06-15) Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements	EN-FR, ES	TC 15
IEC 61068-2:1991 Edition 1.0 (1991-06-17) Specification for polyester fibre woven tapes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 61068-3-1:1995 Edition 2.0 (1995-02-15) Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms	EN-FR, ES	TC 15
IEC 61068-3-1:1995/COR1:1998 Edition 2.0 (1998-01-30) Corrigendum 1 - Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms	EN-FR	TC 15
IEC 61076-1:2006 Edition 2.0 (2006-04-27) Connectors for electronic equipment - Product requirements - Part 1: Generic specification	EN-FR	TC 48/SC 48B
IEC 61076-1:2006/AMD1:2019 Edition 2.0 (2019-01-11) Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification	EN-FR	TC 48/SC 48B
IEC 61076-2:2011 Edition 2.0 (2011-06-21) Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors	EN-FR	TC 48/SC 48B
IEC 61076-2-001:2011 Edition 2.0 (2011-06-21) Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification	EN-FR	TC 48/SC 48B
IEC 61076-2-012:2020 Edition 1.0 (2020-07-27) Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113	EN-FR	TC 48/SC 48B
IEC 61076-2-101:2012 Edition 3.0 (2012-04-20) Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking	EN-FR	TC 48/SC 48B
IEC 61076-2-102:2002 Edition 1.0 (2002-06-05) Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply	EN-FR, ES	TC 48/SC 48B
IEC 61076-2-103:2004 Edition 1.0 (2004-03-08) Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')	EN-FR	TC 48/SC 48B
IEC 61076-2-104:2014 Edition 2.0 (2014-09-09) Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking	EN-FR	TC 48/SC 48B
IEC 61076-2-105:2008 Edition 1.0 (2008-07-25) Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking	EN-FR	TC 48/SC 48B
IEC 61076-2-106:2011 Edition 1.0 (2011-06-21) Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67	EN-FR	TC 48/SC 48B
IEC 61076-2-107:2010 Edition 1.0 (2010-04-29) Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking	EN-FR	TC 48/SC 48B
IEC 61076-2-109:2014 Edition 1.0 (2014-05-08) Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz	EN-FR	TC 48/SC 48B
IEC PAS 61076-2-110:2010 Edition 1.0 (2010-03-24) Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s	EN	TC 48/SC 48B
IEC 61076-2-111:2017 Edition 1.0 (2017-12-07) Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking	EN-FR, EN	TC 48/SC 48B
IEC 61076-2-113:2017 Edition 1.0 (2017-02-21) Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz	EN-FR	TC 48/SC 48B
IEC 61076-2-116:2022 Edition 1.0 (2022-12-15) Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking.	EN-FR	TC 48/SC 48B
IEC 61076-3:2008 Edition 2.0 (2008-07-09) Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification	EN-FR	TC 48/SC 48B
IEC 61076-3-001:2008 Edition 2.0 (2008-07-09) Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification	EN-FR	TC 48/SC 48B
IEC 61076-3-100:1999 Edition 1.0 (1999-11-16) Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row	EN-FR	TC 48/SC 48B
IEC 61076-3-101:1997 Edition 1.0 (1997-09-05) Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line	EN-FR, ES	TC 48/SC 48B
IEC 61076-3-101:1997/COR1:2010 Edition 1.0 (2010-04-21) Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line	EN-FR	TC 48/SC 48B
IEC 61076-3-103:2003 Edition 1.0 (2003-11-28) Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)	EN-FR, EN	TC 48/SC 48B
IEC 61076-3-104:2017 Edition 3.0 (2017-05-22) Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz	EN-FR, EN	TC 48/SC 48B
IEC 61076-3-106:2006 Edition 1.0 (2006-09-12) Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface	EN-FR	TC 48/SC 48B
IEC 61076-3-110:2016 Edition 3.0 (2016-08-30) Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz	EN-FR	TC 48/SC 48B
IEC 61076-3-112:2006 Edition 1.0 (2006-04-27) Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment	EN-FR	TC 48/SC 48B
IEC 61076-3-114:2009 Edition 1.0 (2009-04-29) Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type	EN-FR	TC 48/SC 48B
IEC 61076-3-115:2009 Edition 1.0 (2009-06-17) Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type	EN-FR	TC 48/SC 48B
IEC 61076-3-116:2008 Edition 1.0 (2008-09-09) Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever	EN-FR	TC 48/SC 48B
IEC 61076-3-117:2009 Edition 1.0 (2009-04-29) Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling	EN-FR	TC 48/SC 48B
IEC 61076-3-118:2010 Edition 1.0 (2010-04-26) Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling	EN-FR	TC 48/SC 48B
IEC 61076-3-119:2017 Edition 1.0 (2017-12-08) Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz	EN-FR, EN	TC 48/SC 48B
IEC 61076-3-120:2016 Edition 1.0 (2016-08-25) Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A	EN-FR	TC 48/SC 48B
IEC 61076-3-122:2021 Edition 2.0 (2021-04-21) Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments	EN-FR	TC 48/SC 48B
IEC 61076-3-123:2019 Edition 1.0 (2019-09-13) Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking	EN-FR	TC 48/SC 48B
IEC 61076-3-124:2019 Edition 1.0 (2019-03-11) Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz	EN-FR	TC 48/SC 48B
IEC 61076-3-124:2019/COR1:2020 Edition 1.0 (2020-03-31) Corrigendum 1 - Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz	EN-FR	TC 48/SC 48B
IEC 61076-4:1995 Edition 1.0 (1995-09-22) Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors	EN-FR, ES	TC 48/SC 48B
IEC 61076-4-001:1996 Edition 1.0 (1996-08-19) Connectors with assessed quality, for use in d.c., low-frequencyanalogue and in digital high-speed data applications - Part 4:Printed board connectors - Section 001: Blank detail specification	EN-FR, ES	TC 48/SC 48B
IEC 61076-4-100:2001 Edition 2.0 (2001-10-18) Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes	EN-FR	TC 48/SC 48B
IEC 61076-4-101:2001 Edition 2.0 (2001-09-18) Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917	EN-FR	TC 48/SC 48B
IEC 61076-4-101:2001/COR1:2003 Edition 2.0 (2003-11-04) Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917	EN-FR	TC 48/SC 48B
IEC 61076-4-102:1997 Edition 1.0 (1997-04-23) Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917	EN-FR	TC 48/SC 48B
IEC 61076-4-103:1999 Edition 1.0 (1999-02-26) Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm	EN-FR	TC 48/SC 48B
IEC 61076-4-104:1999 Edition 1.0 (1999-03-19) Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm	EN-FR	TC 48/SC 48B
IEC 61076-4-105:1995 Edition 1.0 (1995-06-19) Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .	EN-FR	TC 48/SC 48B
IEC 61076-4-107:2001 Edition 1.0 (2001-08-22) Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations	EN-FR	TC 48/SC 48B
IEC 61076-4-108:2002 Edition 1.0 (2002-02-14) Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1	EN	TC 48/SC 48B
IEC 61076-4-110:2001 Edition 1.0 (2001-12-07) Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function	EN-FR	TC 48/SC 48B
IEC 61076-4-113:2002 Edition 1.0 (2002-11-15) Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications	EN-FR, EN	TC 48/SC 48B
IEC 61076-4-115:2003 Edition 1.0 (2003-02-26) Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment	EN-FR	TC 48/SC 48B
IEC 61076-4-116:2012 Edition 1.0 (2012-04-19) Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function	EN-FR	TC 48/SC 48B
IEC 61076-4-116:2012/AMD1:2015 Edition 1.0 (2015-11-23) Amendment 1 - Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function	EN-FR	TC 48/SC 48B
IEC 61076-7:2000 Edition 1.0 (2000-06-16) Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation	EN-FR, EN, ES	TC 48/SC 48B
IEC 61076-7-001:2004 Edition 1.0 (2004-07-15) Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification	EN-FR	TC 48/SC 48B
IEC 61076-7-100:2006 Edition 1.0 (2006-05-23) Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system	EN-FR	TC 48/SC 48B
IEC 61076-8-100:2020 Edition 1.0 (2020-04-09) Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A	EN-FR	TC 48/SC 48B
IEC 61076-8-101:2020 Edition 1.0 (2020-04-09) Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A	EN-FR	TC 48/SC 48B
IEC 61076-8-102:2020 Edition 1.0 (2020-04-16) Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A	EN-FR	TC 48/SC 48B
IEC 61086-1:2004 Edition 2.0 (2004-01-26) Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements	EN-FR, ES	TC 15
IEC 61086-2:2004 Edition 2.0 (2004-02-17) Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 61086-2:2004/COR1:2005 Edition 2.0 (2005-01-11) Corrigendum 1 - Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test	EN-FR	TC 15
IEC 61086-3-1:2004 Edition 2.0 (2004-02-09) Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)	EN-FR, ES	TC 15
IEC 61095:2009 Edition 2.0 (2009-02-05) Electromechanical contactors for household and similar purposes	EN-FR, ES	TC 121/SC 121A
IEC 61148:2011 Edition 2.0 (2011-10-20) Terminal markings for valve device stacks and assemblies and for power conversion equipment	EN-FR	TC 22
IEC 61204:1993+AMD1:2001 CSV Edition 1.1 (2001-05-08) Low-voltage power supply devices, d.c. output - Performance characteristics	EN-FR	TC 22/SC 22E
IEC 61204:1993 Edition 1.0 (1993-02-15) Low-voltage power supply devices, d.c. output - Performance characteristics	EN-FR, ES	TC 22/SC 22E
IEC 61204:1993/AMD1:2001 Edition 1.0 (2001-01-19) Amendment 1 - Low-voltage power supply devices, d.c. output - Performance characteristics	EN-FR, ES	TC 22/SC 22E
IEC 61204-3:2016 Edition 3.0 (2016-10-28) Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)	EN-FR	TC 22/SC 22E
IEC 61204-6:2000 Edition 1.0 (2000-11-15) Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance	EN-FR, ES	TC 22/SC 22E
IEC 61204-7:2016 Edition 2.0 (2016-11-07) Low-voltage switch mode power supplies - Part 7: Safety requirements	EN-FR	TC 22/SC 22E
IEC 61212-1:2006 Edition 2.0 (2006-03-08) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements	EN-FR, EN	TC 15
IEC 61212-1:2006/COR1:2014 Edition 2.0 (2014-03-19) Corrigendum 1 - Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements	EN	TC 15
IEC 61212-2:2006 Edition 2.0 (2006-04-10) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 61212-3-1:2013 Edition 3.0 (2013-04-29) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes	EN-FR	TC 15
IEC 61212-3-2:2013 Edition 3.0 (2013-04-29) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes	EN-FR	TC 15
IEC 61212-3-3:2006 Edition 2.0 (2006-08-15) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods	EN-FR, EN	TC 15
IEC 61347-2-7:2011/AMD2:2021 Edition 3.0 (2021-12-13) Amendment 2 - Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)	EN-FR, ES	TC 34/SC 34C
IEC 61400-2:2013 Edition 3.0 (2013-12-12) Wind turbines - Part 2: Small wind turbines	EN-FR, ES	TC 88
IEC 61400-2:2013/COR1:2019 Edition 3.0 (2019-10-10) Corrigendum 1 - Wind turbines - Part 2: Small wind turbines	EN-FR	TC 88
IEC 61406-1:2022 Edition 1.0 (2022-09-15) Identification Link - Part 1: General requirements	EN-FR	TC 65/SC 65E
IEC TR 61439-0:2022 Edition 3.0 (2022-07-22) Low-voltage switchgear and controlgear assemblies- Part 0: Guidance to specifying assemblies	EN-FR	TC 121/SC 121B
IEC 61439-1:2020 Edition 3.0 (2020-05-05) Low-voltage switchgear and controlgear assemblies - Part 1: General rules	EN-FR, ES	TC 121/SC 121B
IEC 61439-1:2020/COR1:2021 Edition 3.0 (2021-12-07) Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules	EN-FR	TC 121/SC 121B
IEC 61439-2:2020 Edition 3.0 (2020-07-22) Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies	EN-FR, EN, ES	TC 121/SC 121B
IEC 61439-3:2012 Edition 1.0 (2012-02-16) Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)	EN-FR, ES	TC 121/SC 121B
IEC 61439-3:2012/COR1:2013 Edition 1.0 (2013-09-11) Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)	EN-FR	TC 121/SC 121B
IEC 61439-3:2012/COR2:2019 Edition 1.0 (2019-03-20) Corrigendum 2 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)	EN-FR	TC 121/SC 121B
IEC 61439-4:2012 Edition 1.0 (2012-11-15) Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)	EN-FR, ES	TC 121/SC 121B
IEC 61439-5:2014 Edition 2.0 (2014-08-25) Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks	EN-FR, ES	TC 121/SC 121B
IEC 61439-5:2014/COR1:2015 Edition 2.0 (2015-03-05) Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks	EN-FR	TC 121/SC 121B
IEC 61439-6:2012 Edition 1.0 (2012-05-23) Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)	EN-FR, ES	TC 121/SC 121B
IEC 61439-7:2022 Edition 2.0 (2022-07-07) Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations	EN-FR	TC 121/SC 121B
IEC TS 61586:2017 Edition 2.0 (2017-01-25) Estimation of the reliability of electrical connectors	EN-FR	TC 48
IEC 61628-1:1997 Edition 1.0 (1997-11-07) Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements	EN-FR, ES	TC 15
IEC 61628-2:1998+AMD1:2007 CSV Edition 1.1 (2007-07-30) Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test	EN-FR	TC 15
IEC 61628-2:1998 Edition 1.0 (1998-11-06) Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 61628-2:1998/AMD1:2007 Edition 1.0 (2007-06-06) Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 61629-1:1996 Edition 1.0 (1996-11-19) Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements	EN-FR, ES	TC 15
IEC 61629-2:1996 Edition 1.0 (1996-11-14) Aramid pressboard for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC TR 61641:2014 Edition 3.0 (2014-09-09) Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault	EN-FR	TC 121/SC 121B
IEC 61770:2008 Edition 2.0 (2008-07-23) Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets	EN-FR, ES	TC 61
IEC 61770:2008/AMD1:2015 Edition 2.0 (2015-10-13) Amendment 1 - Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets	EN-FR, ES	TC 61
IEC 61800-3:2022 Edition 4.0 (2022-11-30) Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools	EN-FR	TC 22/SC 22G
IEC TR 61912-1:2007 Edition 1.0 (2007-08-23) Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings	EN-FR	TC 121/SC 121A
IEC TR 61912-2:2009 Edition 1.0 (2009-05-13) Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions	EN	TC 121/SC 121A
IEC 61915-1:2007 Edition 1.0 (2007-11-27) Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles	EN-FR	TC 121/SC 121A
IEC 61915-2:2011 Edition 1.0 (2011-10-20) Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment	EN-FR	TC 121/SC 121A
IEC 61915-2:2011/COR1:2012 Edition 1.0 (2012-07-27) Corrigendum 1 - Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment	EN-FR	TC 121/SC 121A
IEC 61984:2008 Edition 2.0 (2008-10-08) Connectors - Safety requirements and tests	EN-FR	TC 48/SC 48B
IEC 61984:2008/COR1:2011 Edition 2.0 (2011-10-18) Corrigendum 1 - Connectors - Safety requirements and tests	EN-FR	TC 48/SC 48B
IEC 62011-1:2002 Edition 1.0 (2002-05-23) Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements	EN-FR, ES	TC 15
IEC 62011-2:2004 Edition 1.0 (2004-01-08) Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test	EN-FR, ES	TC 15
IEC 62011-3-1:2003 Edition 1.0 (2003-08-21) Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section	EN-FR, ES	TC 15
IEC 62026-1:2019 Edition 3.0 (2019-05-09) Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules	EN-FR, ES	TC 121/SC 121A
IEC 62026-2:2008 Edition 2.0 (2008-01-29) Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)	EN-FR, EN	TC 121/SC 121A
IEC 62026-2:2008/AMD1:2019 Edition 2.0 (2019-07-10) Amendment 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)	EN-FR	TC 121/SC 121A
IEC 62026-3:2014 Edition 3.0 (2014-08-22) Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet	EN-FR	TC 121/SC 121A
IEC 62026-3:2014/COR1:2015 Edition 3.0 (2015-03-05) Corrigendum 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet	EN-FR	TC 121/SC 121A
IEC 62026-3:2014/COR2:2019 Edition 3.0 (2019-10-29) Corrigendum 2 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet	EN-FR	TC 121/SC 121A
IEC 62026-7:2010 Edition 1.0 (2010-12-09) Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet	EN-FR	TC 121/SC 121A
IEC 62047-1:2016 Edition 2.0 (2016-01-06) Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions	EN-FR	TC 47/SC 47F
IEC 62047-2:2006 Edition 1.0 (2006-08-15) Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials	EN-FR	TC 47/SC 47F
IEC 62047-3:2006 Edition 1.0 (2006-08-15) Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing	EN-FR	TC 47/SC 47F
IEC 62047-4:2008 Edition 1.0 (2008-08-21) Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS	EN-FR	TC 47/SC 47F
IEC 62047-6:2009 Edition 1.0 (2009-04-07) Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials	EN-FR	TC 47/SC 47F
IEC 62047-8:2011 Edition 1.0 (2011-03-14) Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films	EN-FR	TC 47/SC 47F
IEC 62047-9:2011 Edition 1.0 (2011-07-13) Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS	EN-FR	TC 47/SC 47F
IEC 62047-9:2011/COR1:2012 Edition 1.0 (2012-03-08) Corrigendum 1 - Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS	EN-FR	TC 47/SC 47F
IEC 62047-10:2011 Edition 1.0 (2011-07-26) Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials	EN-FR	TC 47/SC 47F
IEC 62047-10:2011/COR1:2012 Edition 1.0 (2012-02-28) Corrigendum 1 - Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials	EN-FR	TC 47/SC 47F
IEC 62047-11:2013 Edition 1.0 (2013-07-17) Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems	EN-FR	TC 47/SC 47F
IEC 62047-12:2011 Edition 1.0 (2011-09-13) Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures	EN-FR	TC 47/SC 47F
IEC 62047-13:2012 Edition 1.0 (2012-02-28) Semiconductor devices - Micro-electromechanical devices - Part 13: Bend - and shear - type test methods of measuring adhesive strength for MEMS structures	EN-FR	TC 47/SC 47F
IEC 62047-14:2012 Edition 1.0 (2012-02-28) Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic film materials	EN-FR	TC 47/SC 47F
IEC 62047-16:2015 Edition 1.0 (2015-03-05) Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods	EN-FR	TC 47/SC 47F
IEC 62047-17:2015 Edition 1.0 (2015-03-05) Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films	EN-FR	TC 47/SC 47F
IEC 62047-18:2013 Edition 1.0 (2013-07-17) Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials	EN-FR	TC 47/SC 47F
IEC 62047-21:2014 Edition 1.0 (2014-06-19) Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials	EN-FR	TC 47/SC 47F
IEC 62047-22:2014 Edition 1.0 (2014-06-19) Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates	EN-FR	TC 47/SC 47F
IEC 62047-25:2016 Edition 1.0 (2016-08-29) Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area	EN-FR	TC 47/SC 47F
IEC 62047-26:2016 Edition 1.0 (2016-01-07) Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures	EN-FR	TC 47/SC 47F
IEC 62047-29:2017 Edition 1.0 (2017-11-22) Semiconductor devices - Micro-electromechanical devices - Part 29: Electromechanical relaxation test method for freestanding conductive thin-films under room temperature	EN	TC 47/SC 47F
IEC TR 62063:1999 Edition 1.0 (1999-08-06) High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear	EN-FR, ES	TC 17
IEC 62091:2007 Edition 1.0 (2007-01-24) Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps	EN-FR	TC 121/SC 121A
IEC 62197-1:2006 Edition 1.0 (2006-04-27) Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification	EN-FR	TC 48/SC 48B
IEC 62208:2011 Edition 2.0 (2011-08-19) Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements	EN-FR, ES	TC 121/SC 121B
IEC 62271-1:2017 Edition 2.0 (2017-07-12) High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear	EN-FR, ES	TC 17
IEC 62271-1:2017/ISH1:2021 Edition 2.0 (2021-05-26) Interpretation Sheet 1 - High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear	EN-FR	TC 17
IEC 62271-1:2017/AMD1:2021 Edition 2.0 (2021-10-04) Amendment 1 - High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear	EN-FR, ES	TC 17
IEC 62271-3:2015 Edition 2.0 (2015-03-10) High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850	EN-FR	TC 17
IEC 62271-4:2022 Edition 2.0 (2022-07-22) High-voltage switchgear and controlgear - Part 4: Handling procedures for gases for insulation and/or switching	EN-FR	TC 17
IEC/IEEE 62271-37-013:2021 Edition 2.0 (2021-10-19) High-voltage switchgear and controlgear - Part 37-013: Alternating current generator circuit-breakers	EN	TC 17/SC 17A
IEC/IEEE 62271-37-082:2012 Edition 1.0 (2012-10-25) High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers	EN	TC 17/SC 17A
IEC/IEEE 62271-37-082:2012/COR1:2014 Edition 1.0 (2014-01-16) Corrigendum 1 - High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers	EN	TC 17/SC 17A
IEC 62271-100:2021 Edition 3.0 (2021-07-07) High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers	EN-FR	TC 17/SC 17A
IEC 62271-101:2021 Edition 3.0 (2021-07-27) High-voltage switchgear and controlgear - Part 101: Synthetic testing	EN-FR	TC 17/SC 17A
IEC 62271-102:2018 Edition 2.0 (2018-05-15) High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches	EN-FR, ES	TC 17/SC 17A
IEC 62271-102:2018/AMD1:2022 Edition 2.0 (2022-04-27) Amendment 1 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches	EN-FR	TC 17/SC 17A
IEC 62271-103:2021 Edition 2.0 (2021-05-11) High-voltage switchgear and controlgear - Part 103: Alternating current switches for rated voltages above 1 kV up to and including 52 kV	EN-FR	TC 17/SC 17A
IEC 62271-104:2020 Edition 3.0 (2020-08-21) High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV	EN-FR, ES	TC 17/SC 17A
IEC 62271-105:2021 Edition 3.0 (2021-06-15) High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV	EN-FR	TC 17/SC 17A
IEC 62271-106:2021 Edition 2.0 (2021-04-26) High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters	EN-FR, EN	TC 17/SC 17A
IEC 62271-107:2019 Edition 3.0 (2019-05-28) High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV	EN-FR	TC 17/SC 17A
IEC 62271-108:2020 Edition 2.0 (2020-07-09) High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages above 52 kV	EN-FR	TC 17/SC 17A
IEC 62271-109:2019 Edition 3.0 (2019-04-08) High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches	EN-FR	TC 17/SC 17A
IEC 62271-110:2023 Edition 5.0 (2023-03-16) High-voltage switchgear and controlgear - Part 110: Inductive load switching	EN-FR	TC 17/SC 17A
IEC 62271-111:2019 Edition 3.0 (2019-02-12) High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV	EN-FR	TC 17/SC 17A
IEC 62271-112:2021 Edition 2.0 (2021-07-13) High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines	EN-FR	TC 17/SC 17A
IEC 62271-200:2021 Edition 3.0 (2021-05-27) High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV	EN-FR, EN	TC 17/SC 17C
IEC 62271-201:2014 Edition 2.0 (2014-03-27) High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV	EN-FR, ES	TC 17/SC 17C
IEC 62271-202:2022 Edition 3.0 (2022-06-22) High-voltage switchgear and controlgear - Part 202: AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-203:2022 Edition 3.0 (2022-05-30) High-voltage switchgear and controlgear - Part 203: AC gas-insulated metal-enclosed switchgear for rated voltages above 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-204:2022 Edition 2.0 (2022-05-31) High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-205:2008 Edition 1.0 (2008-01-15) High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV	EN-FR, ES	TC 17/SC 17C
IEC 62271-207:2012 Edition 2.0 (2012-04-27) High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV	EN-FR, ES	TC 17/SC 17C
IEC 62271-207:2012/COR1:2013 Edition 2.0 (2013-01-25) Corrigendum 1 - High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV	EN-FR	TC 17/SC 17C
IEC TR 62271-208:2009 Edition 1.0 (2009-10-28) High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations	EN-FR	TC 17/SC 17C
IEC 62271-209:2019 Edition 2.0 (2019-02-08) High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable terminations	EN-FR, ES	TC 17/SC 17C
IEC 62271-209:2019/AMD1:2022 Edition 2.0 (2022-03-31) Amendment 1 - High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable terminations	EN-FR	TC 17/SC 17C
IEC TS 62271-210:2013 Edition 1.0 (2013-02-06) High-voltage switchgear and controlgear - Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-211:2014 Edition 1.0 (2014-04-24) High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV	EN-FR, ES	TC 17/SC 17C
IEC 62271-211:2014/COR1:2015 Edition 1.0 (2015-08-07) Corrigendum 1 - High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-211:2014/COR2:2017 Edition 1.0 (2017-08-17) Corrigendum 2 - High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-212:2022 Edition 2.0 (2022-06-29) High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV	EN-FR	TC 17/SC 17C
IEC 62271-214:2019 Edition 1.0 (2019-06-20) High-voltage switchgear and controlgear - Part 214: Internal arc classification for metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV	EN-FR, ES	TC 17/SC 17C
IEC TR 62271-300:2006 Edition 1.0 (2006-11-15) High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers	EN-FR	TC 17/SC 17A
IEC TR 62271-301:2009 Edition 2.0 (2009-09-17) High-voltage switchgear and controlgear - Part 301: Dimensional standardisation of high-voltage terminals	EN-FR	TC 17/SC 17A
IEC TR 62271-302:2010 Edition 1.0 (2010-06-21) High-voltage switchgear and controlgear - Part 302: Alternating current circuit-breakers with intentionally non-simultaneous pole operation	EN-FR	TC 17/SC 17A
IEC TS 62271-304:2019 Edition 2.0 (2019-03-21) High-voltage switchgear and controlgear - Part 304: Classification of indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV related to the use in special service conditions with respect to condensation and pollution	EN-FR	TC 17/SC 17C
IEC TR 62271-305:2009 Edition 1.0 (2009-11-25) High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV	EN	TC 17/SC 17A
IEC TR 62271-305:2009/COR1:2017 Edition 1.0 (2017-06-30) Corrigendum 1 - High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated - Disconnectors for rated voltages above 52 kV	EN	TC 17/SC 17A
IEC TR 62271-306:2012 Edition 1.0 (2012-12-14) High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers	EN	TC 17/SC 17A
IEC TR 62271-306:2012/AMD1:2018 Edition 1.0 (2018-08-24) Amendment 1 - High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers	EN	TC 17/SC 17A
IEC TR 62271-307:2015 Edition 1.0 (2015-09-16) High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV	EN-FR	TC 17/SC 17C
IEC TR 62271-310:2008 Edition 2.0 (2008-03-27) High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV	EN-FR	TC 17/SC 17A
IEC 62329-1:2005 Edition 1.0 (2005-11-21) Heat shrinkable moulded shapes - Part 1: Definitions and general requirements	EN-FR, EN	TC 15
IEC 62329-2:2006 Edition 1.0 (2006-07-10) Heat-shrinkable moulded shapes - Part 2: Methods of test	EN-FR, EN	TC 15
IEC 62329-3-100:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions	EN-FR	TC 15
IEC 62329-3-101:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance	EN-FR	TC 15
IEC 62329-3-102:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance	EN-FR	TC 15
IEC TR 62422:2007 Edition 1.0 (2007-03-29) Environmental characterization of solid insulating materials	EN	TC 15
IEC TS 62578:2015 Edition 2.0 (2015-04-15) Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz	EN-FR	TC 22
IEC 62626-1:2014 Edition 1.0 (2014-02-14) Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work	EN-FR	TC 121/SC 121A
IEC TR 62652:2010 Edition 1.0 (2010-03-30) Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications	EN	TC 48/SC 48B
IEC 62677-1:2017 Edition 1.0 (2017-10-11) Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements	EN-FR	TC 15
IEC 62677-2:2017 Edition 1.0 (2017-10-11) Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test	EN-FR	TC 15
IEC 62677-3-101:2018 Edition 1.0 (2018-01-10) Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications	EN-FR	TC 15
IEC 62677-3-102:2018 Edition 1.0 (2018-01-10) Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications	EN-FR	TC 15
IEC 62677-3-103:2019 Edition 1.0 (2019-05-14) Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications	EN-FR	TC 15
IEC 62683-1:2017 Edition 1.0 (2017-07-12) Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data	EN-FR	TC 121
IEC 62695:2014 Edition 1.0 (2014-07-09) Railway applications - Fixed installations - Trac

SDG 6 - Clean water and sanitation

Safe and affordable water

IEC for SDGs

IEC work addresses topics related to water and sanitation

IEC work directly impacts the following SDG targets

6.1 Safe and affordable drinking water for all

Click here to see the example

6.3 Reducing water pollution, increase wastewater treatment and reuse

Click here to see the example

6.4 More efficient water use and reduced water scarcity

Click here to see the example

6.A Water harvesting, desalination, water efficiency, wastewater treatment, recycling and reuse technologies

Click here to see the example